Windows Vista Forums
Vista Forums Home Join Vista Forums Windows 7 Forum Vista Tutorials Tags
Welcome to Windows Vista Forums. Our forum is dedicated to helping you find solutions with any problems, errors or issues you are experiencing with Windows Vista. The Vista forum also covers news and updates and has an extensive Windows Vista tutorial section that covers a wide range of tips and tricks.

Go Back   Vista Forums > Vista Newsgroups > Vista General

Vista - Bypass boot screen?

Reply
 
Old 08-16-2006   #21 (permalink)
=?Utf-8?B?VmJyaXR0?=


 
 

Re: Bypass boot screen?

Steve,

Thanks, I'll give that a try. I found that option when I did the upgrade
from XP, what a mistake, then after doing a clean install I could no longer
find it again.

I am like you the UAC is such an irritation that it had to go. I keep
reading about how secure it makes Vista, but I wonder if that is the team
that developed it that are making those comments. I just can't imagine
anyone that would live with that. Every time you do virtually anything you
are having to answer the nag screen. I read on one of the groups where they
are going to relax it somewhat, but I would like it to be configurable where
the user decides how much or how little control UAC has over the system. As
it is, most users with more than average exposure will turn it off
completely. That my two cents worth.

Thanks again for the information.


"Steve Williamson" wrote:

> You can log on automatically, same as XP. Goto a run prompt and type
> "control userpasswords2" without the quotes. Uncheck "users must enter a
> username and password..." (Apologies if it's worded differently, I'm doing
> it from memory as my install is fecked!)
>
> If you're talking about User Account Control, I managed to turn it off by
> going into the Security Center and disabling "User Account Control". It was
> useful at first, then it started to really annoy me by dimming everything
> until I clicked OK to allow something I had myself initiated.
>
> Hope that helps.
> Steve
>
> "Bill" <smile@here.com> wrote in message
> news9FEADEB-5E71-40E4-9319-C1668C4514FF@microsoft.com...
> > When I boot/reboot Vista it gets to a screen that has my name and a little
> > orange square above it. I can click on the little orange square (actually
> > a
> > picture of some sort) or hit ENTER to continue the boot process.
> >
> > Is there a way to bypass this so the machine will boot fully unattended?
> > Also, since I am the only user on this machine, can't I have ADMIN
> > privileges/rights/options over everything all the time. I tried to do
> > something (yes, I forgot what it was) and was told I didn't have the
> > privilege/whatever to do it. Kinda like having my Mother here to watch
> > over
> > me )
> >
> >
> > Happy Fathers Day
> >
> >
> > Bill
> >
> >

>
>
>


My System SpecsSystem Spec
Old 08-16-2006   #22 (permalink)
=?Utf-8?B?VmJyaXR0?=


 
 

Re: Bypass boot screen?

Steve,

Thanks, I'll give that a try. I found that option when I did the upgrade
from XP, what a mistake, then after doing a clean install I could no longer
find it again.

I am like you the UAC is such an irritation that it had to go. I keep
reading about how secure it makes Vista, but I wonder if that is the team
that developed it that are making those comments. I just can't imagine
anyone that would live with that. Every time you do virtually anything you
are having to answer the nag screen. I read on one of the groups where they
are going to relax it somewhat, but I would like it to be configurable where
the user decides how much or how little control UAC has over the system. As
it is, most users with more than average exposure will turn it off
completely. That my two cents worth.

Thanks again for the information.


"Steve Williamson" wrote:

> You can log on automatically, same as XP. Goto a run prompt and type
> "control userpasswords2" without the quotes. Uncheck "users must enter a
> username and password..." (Apologies if it's worded differently, I'm doing
> it from memory as my install is fecked!)
>
> If you're talking about User Account Control, I managed to turn it off by
> going into the Security Center and disabling "User Account Control". It was
> useful at first, then it started to really annoy me by dimming everything
> until I clicked OK to allow something I had myself initiated.
>
> Hope that helps.
> Steve
>
> "Bill" <smile@here.com> wrote in message
> news9FEADEB-5E71-40E4-9319-C1668C4514FF@microsoft.com...
> > When I boot/reboot Vista it gets to a screen that has my name and a little
> > orange square above it. I can click on the little orange square (actually
> > a
> > picture of some sort) or hit ENTER to continue the boot process.
> >
> > Is there a way to bypass this so the machine will boot fully unattended?
> > Also, since I am the only user on this machine, can't I have ADMIN
> > privileges/rights/options over everything all the time. I tried to do
> > something (yes, I forgot what it was) and was told I didn't have the
> > privilege/whatever to do it. Kinda like having my Mother here to watch
> > over
> > me )
> >
> >
> > Happy Fathers Day
> >
> >
> > Bill
> >
> >

>
>
>

My System SpecsSystem Spec
Old 08-16-2006   #23 (permalink)
=?Utf-8?B?VmJyaXR0?=


 
 

Re: Bypass boot screen?

Steve,

Thanks, I'll give that a try. I found that option when I did the upgrade
from XP, what a mistake, then after doing a clean install I could no longer
find it again.

I am like you the UAC is such an irritation that it had to go. I keep
reading about how secure it makes Vista, but I wonder if that is the team
that developed it that are making those comments. I just can't imagine
anyone that would live with that. Every time you do virtually anything you
are having to answer the nag screen. I read on one of the groups where they
are going to relax it somewhat, but I would like it to be configurable where
the user decides how much or how little control UAC has over the system. As
it is, most users with more than average exposure will turn it off
completely. That my two cents worth.

Thanks again for the information.


"Steve Williamson" wrote:

> You can log on automatically, same as XP. Goto a run prompt and type
> "control userpasswords2" without the quotes. Uncheck "users must enter a
> username and password..." (Apologies if it's worded differently, I'm doing
> it from memory as my install is fecked!)
>
> If you're talking about User Account Control, I managed to turn it off by
> going into the Security Center and disabling "User Account Control". It was
> useful at first, then it started to really annoy me by dimming everything
> until I clicked OK to allow something I had myself initiated.
>
> Hope that helps.
> Steve
>
> "Bill" <smile@here.com> wrote in message
> news9FEADEB-5E71-40E4-9319-C1668C4514FF@microsoft.com...
> > When I boot/reboot Vista it gets to a screen that has my name and a little
> > orange square above it. I can click on the little orange square (actually
> > a
> > picture of some sort) or hit ENTER to continue the boot process.
> >
> > Is there a way to bypass this so the machine will boot fully unattended?
> > Also, since I am the only user on this machine, can't I have ADMIN
> > privileges/rights/options over everything all the time. I tried to do
> > something (yes, I forgot what it was) and was told I didn't have the
> > privilege/whatever to do it. Kinda like having my Mother here to watch
> > over
> > me )
> >
> >
> > Happy Fathers Day
> >
> >
> > Bill
> >
> >

>
>
>

My System SpecsSystem Spec
Old 08-16-2006   #24 (permalink)
=?Utf-8?B?VmJyaXR0?=


 
 

Re: Bypass boot screen?

Why is it that everytime I write something that is the least little bit
negative my post fails. Just coincidence I guess, so I'll try again.

Thanks for the post. I had found and turned off the option when I first
installed Vista using the upgrade option. Talk about a mistake! Then when I
did the clean install I couldn't find the option again. Caused me to think
that perhaps I had not found a way to turn it off at all.

I agree with you on the UAC. It is such an irritate that anyone more
experienced than a novice will turn it off completely after just a short
while. I would rather see the option configurable so that you can make it as
restrictive or un-restrictive as you wish. I can't imagine anyone liking it
as it currently functions. I read where they were going to relax it a bit in
RC1, but I think that they need to relax it a lot. That's my two cents for
what it's worth.

Thanks again for the help.



"Steve Williamson" wrote:

> You can log on automatically, same as XP. Goto a run prompt and type
> "control userpasswords2" without the quotes. Uncheck "users must enter a
> username and password..." (Apologies if it's worded differently, I'm doing
> it from memory as my install is fecked!)
>
> If you're talking about User Account Control, I managed to turn it off by
> going into the Security Center and disabling "User Account Control". It was
> useful at first, then it started to really annoy me by dimming everything
> until I clicked OK to allow something I had myself initiated.
>
> Hope that helps.
> Steve
>
> "Bill" <smile@here.com> wrote in message
> news9FEADEB-5E71-40E4-9319-C1668C4514FF@microsoft.com...
> > When I boot/reboot Vista it gets to a screen that has my name and a little
> > orange square above it. I can click on the little orange square (actually
> > a
> > picture of some sort) or hit ENTER to continue the boot process.
> >
> > Is there a way to bypass this so the machine will boot fully unattended?
> > Also, since I am the only user on this machine, can't I have ADMIN
> > privileges/rights/options over everything all the time. I tried to do
> > something (yes, I forgot what it was) and was told I didn't have the
> > privilege/whatever to do it. Kinda like having my Mother here to watch
> > over
> > me )
> >
> >
> > Happy Fathers Day
> >
> >
> > Bill
> >
> >

>
>
>

My System SpecsSystem Spec
Old 08-16-2006   #25 (permalink)
MICHAEL


 
 

Re: Bypass boot screen?

Because Microsoft loves fking with you. ;-)

-Michael

"Vbritt" <Vbritt@discussions.microsoft.com> wrote in message
news:3A51FEC9-D2AB-4BE4-B003-3B83B8ED1BCA@microsoft.com...
> Why is it that everytime I write something that is the least little bit
> negative my post fails. Just coincidence I guess, so I'll try again.
>
> Thanks for the post. I had found and turned off the option when I first
> installed Vista using the upgrade option. Talk about a mistake! Then when I
> did the clean install I couldn't find the option again. Caused me to think
> that perhaps I had not found a way to turn it off at all.
>
> I agree with you on the UAC. It is such an irritate that anyone more
> experienced than a novice will turn it off completely after just a short
> while. I would rather see the option configurable so that you can make it as
> restrictive or un-restrictive as you wish. I can't imagine anyone liking it
> as it currently functions. I read where they were going to relax it a bit in
> RC1, but I think that they need to relax it a lot. That's my two cents for
> what it's worth.
>
> Thanks again for the help.
>
>
>
> "Steve Williamson" wrote:
>
>> You can log on automatically, same as XP. Goto a run prompt and type
>> "control userpasswords2" without the quotes. Uncheck "users must enter a
>> username and password..." (Apologies if it's worded differently, I'm doing
>> it from memory as my install is fecked!)
>>
>> If you're talking about User Account Control, I managed to turn it off by
>> going into the Security Center and disabling "User Account Control". It was
>> useful at first, then it started to really annoy me by dimming everything
>> until I clicked OK to allow something I had myself initiated.
>>
>> Hope that helps.
>> Steve
>>
>> "Bill" <smile@here.com> wrote in message
>> news9FEADEB-5E71-40E4-9319-C1668C4514FF@microsoft.com...
>> > When I boot/reboot Vista it gets to a screen that has my name and a little
>> > orange square above it. I can click on the little orange square (actually
>> > a
>> > picture of some sort) or hit ENTER to continue the boot process.
>> >
>> > Is there a way to bypass this so the machine will boot fully unattended?
>> > Also, since I am the only user on this machine, can't I have ADMIN
>> > privileges/rights/options over everything all the time. I tried to do
>> > something (yes, I forgot what it was) and was told I didn't have the
>> > privilege/whatever to do it. Kinda like having my Mother here to watch
>> > over
>> > me )
>> >
>> >
>> > Happy Fathers Day
>> >
>> >
>> > Bill
>> >
>> >

>>
>>
>>


My System SpecsSystem Spec
Old 08-16-2006   #26 (permalink)
Colin Barnhorst


 
 

Re: Bypass boot screen?

If you are using the web-based browser the error message is false and is a
known bug. If it annoys you use the newsreader in Windows Mail or OE.

"Vbritt" <Vbritt@discussions.microsoft.com> wrote in message
news:3A51FEC9-D2AB-4BE4-B003-3B83B8ED1BCA@microsoft.com...
> Why is it that everytime I write something that is the least little bit
> negative my post fails. Just coincidence I guess, so I'll try again.
>
> Thanks for the post. I had found and turned off the option when I first
> installed Vista using the upgrade option. Talk about a mistake! Then
> when I
> did the clean install I couldn't find the option again. Caused me to
> think
> that perhaps I had not found a way to turn it off at all.
>
> I agree with you on the UAC. It is such an irritate that anyone more
> experienced than a novice will turn it off completely after just a short
> while. I would rather see the option configurable so that you can make it
> as
> restrictive or un-restrictive as you wish. I can't imagine anyone liking
> it
> as it currently functions. I read where they were going to relax it a bit
> in
> RC1, but I think that they need to relax it a lot. That's my two cents
> for
> what it's worth.
>
> Thanks again for the help.
>
>
>
> "Steve Williamson" wrote:
>
>> You can log on automatically, same as XP. Goto a run prompt and type
>> "control userpasswords2" without the quotes. Uncheck "users must enter a
>> username and password..." (Apologies if it's worded differently, I'm
>> doing
>> it from memory as my install is fecked!)
>>
>> If you're talking about User Account Control, I managed to turn it off by
>> going into the Security Center and disabling "User Account Control". It
>> was
>> useful at first, then it started to really annoy me by dimming everything
>> until I clicked OK to allow something I had myself initiated.
>>
>> Hope that helps.
>> Steve
>>
>> "Bill" <smile@here.com> wrote in message
>> news9FEADEB-5E71-40E4-9319-C1668C4514FF@microsoft.com...
>> > When I boot/reboot Vista it gets to a screen that has my name and a
>> > little
>> > orange square above it. I can click on the little orange square
>> > (actually
>> > a
>> > picture of some sort) or hit ENTER to continue the boot process.
>> >
>> > Is there a way to bypass this so the machine will boot fully
>> > unattended?
>> > Also, since I am the only user on this machine, can't I have ADMIN
>> > privileges/rights/options over everything all the time. I tried to do
>> > something (yes, I forgot what it was) and was told I didn't have the
>> > privilege/whatever to do it. Kinda like having my Mother here to watch
>> > over
>> > me )
>> >
>> >
>> > Happy Fathers Day
>> >
>> >
>> > Bill
>> >
>> >

>>
>>
>>



My System SpecsSystem Spec
Reply

Thread Tools


Similar Threads
Thread Forum
Anyway to bypass the first Vista screen? Software
How to bypass hibernate file during boot? Vista General
Bypass log in screen? Vista account administration
Bypass te Login screen? Vista General
Need to bypass vista boot Vista General


Vista Forums is an independent web site and has not been authorized,
sponsored, or otherwise approved by Microsoft Corporation.
"Windows Vista", the Start Orb, and related materials are trademarks of Microsoft Corp.
© Designer Media Ltd

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46