Vista - MVP's were are you

The networking guru's hang out in this group:
microsoft.public.windows.vista.networking_sharing

You are likely to get a better response to your questions there!

--


Regards,

Richard Urban
Microsoft MVP Windows Shell/User
(For email, remove the obvious from my address)

"brelade" <brelade@discussions.microsoft.com> wrote in message
news:AC5CA151-222C-414C-815C-27918439B86E@microsoft.com...
>I have posted this question several times with no takers.
>
> I am trying to establish a connection to my web server in http, with add
> new
> network connection, it will only accept an address in ftp.
> Is there a reason why i cannot input an http address.
>
> With XP in was in my network places, but the ability has been removed in
> Vista.
>
> I have manage to establish a network connect with my web server by "add
> Network Location", but with Vista I can only find an ftp:// way of
> uploading
> to my web server with add a network:
>
> My web site requires to be uploaded with HTTP uploading protocol with
> FPSE,
> but when I Specify the location of my website following the on screen
> prompts, it will not allow me to input an http address, below are the
> examples given from the wizard during the add network location process
>
> It gives examples:
> 1. \\server\share (Share folder)
> 2. http://webserver/share ; (Web share)
> 3. ftp://mysite.co.uk (ftp site)
>
> The address I would like to add is: http://breladecockerspaniels.co.uk
>
> When I try to input http://breladecockerspaniels.co.uk ; it returns "the
> folder you entered does not appear to be valid, please choose another".
>
> Many thanks
>
> --
> brelade

Tried there no joy, but will post there as well, i am getting more joy here,
hopeing someone who is in to web design as well has an answer
--
brelade


"Richard Urban" wrote:

> The networking guru's hang out in this group:
> microsoft.public.windows.vista.networking_sharing
>
> You are likely to get a better response to your questions there!
>
> --
>
>
> Regards,
>
> Richard Urban
> Microsoft MVP Windows Shell/User
> (For email, remove the obvious from my address)
>
> "brelade" <brelade@discussions.microsoft.com> wrote in message
> news:AC5CA151-222C-414C-815C-27918439B86E@microsoft.com...
> >I have posted this question several times with no takers.
> >
> > I am trying to establish a connection to my web server in http, with add
> > new
> > network connection, it will only accept an address in ftp.
> > Is there a reason why i cannot input an http address.
> >
> > With XP in was in my network places, but the ability has been removed in
> > Vista.
> >
> > I have manage to establish a network connect with my web server by "add
> > Network Location", but with Vista I can only find an ftp:// way of
> > uploading
> > to my web server with add a network:
> >
> > My web site requires to be uploaded with HTTP uploading protocol with
> > FPSE,
> > but when I Specify the location of my website following the on screen
> > prompts, it will not allow me to input an http address, below are the
> > examples given from the wizard during the add network location process
> >
> > It gives examples:
> > 1. \\server\share (Share folder)
> > 2. http://webserver/share ; (Web share)
> > 3. ftp://mysite.co.uk (ftp site)
> >
> > The address I would like to add is: http://breladecockerspaniels.co.uk
> >
> > When I try to input http://breladecockerspaniels.co.uk ; it returns "the
> > folder you entered does not appear to be valid, please choose another".
> >
> > Many thanks
> >
> > --
> > brelade
>
>

In article <2A59A3B9-D465-4D7F-8B65-825C660B3F69@microsoft.com>,
brelade@discussions.microsoft.com says...
> I take on board the ease in which to upload with network connections,
> (currently am doing it this way), BUT as i mentioned it will only allow an
> ftp address to connect, which is fine for uploading in that format, (web site
> uploads ok), but i have a response form included in my site, and therefore
> the site HAS TO BE in HTTP for the included form to work.

FTP is a a method to move files, any file, and it doesn't care about the
contents. You can upload your RESPONSE FORM via FTP without any problem.

Now if you wanted to write "I need to fill out my response form using
FTP and it doesn't work" - that would be true, but then neither would
drag/drop.

You need to undstand that you CAN FTP your folder with ALL of your site
from your computer to your WEB server and it will work, it's just like a
Drag/Drop....

Next thing you need to learn is how to write real website code without
using FP, you can do everything in NotePad also.

--

Leythos
- Igitur qui desiderat pacem, praeparet bellum.
- Calling an illegal alien an "undocumented worker" is like calling a
drug dealer an "unlicensed pharmacist"
spam999free@rrohio.com (remove 999 for proper email address)

I've never used publisher but,
instead of trying to add ftp://breladecockerspaniels.co.uk
to network places, try adding
www.breladecockerspaniels.co.uk



--

Steve Easton
Microsoft MVP FrontPage
FP Cleaner
http://www.95isalive.com/fixes/fpclean.htm
Hit Me FP
http://www.95isalive.com/fixes/HitMeFP.htm

"brelade" <brelade@discussions.microsoft.com> wrote in message
news:28319072-734A-4BD1-8F68-74B2590AE4F4@microsoft.com...
>I am using MS Publisher 2007, and i am trying to connect to my server
> (1and1.co.uk)
>
> I am having no peroblem in getting site uploaded and on the the web, but at
> present it is not in the correct format for the response form on my contact
> page to work, all other functions work ok, but i draw your attension the the
> response from Microsoft regarding this form and http.
> I have used wiseftp / filezilla, and an currently uploading to my server via
> add new network connection on my computer, but all in ftp.
> --
> brelade
>
>
> "Steve Easton" wrote:
>
>> What "program" are you using to try to publish?
>>
>>
>> --
>>
>> Steve Easton
>> Microsoft MVP FrontPage
>> FP Cleaner
>> http://www.95isalive.com/fixes/fpclean.htm
>> Hit Me FP
>> http://www.95isalive.com/fixes/HitMeFP.htm
>>
>> "brelade" <brelade@discussions.microsoft.com> wrote in message
>> news:AC5CA151-222C-414C-815C-27918439B86E@microsoft.com...
>> >I have posted this question several times with no takers.
>> >
>> > I am trying to establish a connection to my web server in http, with add new
>> > network connection, it will only accept an address in ftp.
>> > Is there a reason why i cannot input an http address.
>> >
>> > With XP in was in my network places, but the ability has been removed in
>> > Vista.
>> >
>> > I have manage to establish a network connect with my web server by "add
>> > Network Location", but with Vista I can only find an ftp:// way of uploading
>> > to my web server with add a network:
>> >
>> > My web site requires to be uploaded with HTTP uploading protocol with FPSE,
>> > but when I Specify the location of my website following the on screen
>> > prompts, it will not allow me to input an http address, below are the
>> > examples given from the wizard during the add network location process
>> >
>> > It gives examples:
>> > 1. \\server\share (Share folder)
>> > 2. http://webserver/share ; (Web share)
>> > 3. ftp://mysite.co.uk (ftp site)
>> >
>> > The address I would like to add is: http://breladecockerspaniels.co.uk
>> >
>> > When I try to input http://breladecockerspaniels.co.uk ; it returns "the
>> > folder you entered does not appear to be valid, please choose another".
>> >
>> > Many thanks
>> >
>> > --
>> > brelade
>>
>>
>>

You have gone over my head.

All i know is i am getting error 404 on my "Contact Us" page when i submit
form, the form has uploaded but will not work, i have contacted my server: no
joy, i have posted on Publisher new group, no one there knows about Vista and
how to upload in http, told to post in Vista news group, Vista network
disscusions no joy there.

i have done my research with Microsoft and have been told ftp will corrupt
FPSE, it needs to be in http!!!!!!!!!. AM I THE ONLY PERSON IN THE WORLD that
has Publisher & response form on it using Vista.

I am presently uploading in ftp as a stop gap to get it on the web, but need
this response form to work, which it has done in the past with (XP) but i
cannot find away to point my site to my server with the address
http://breladecockerspaniels.co.uk

I have all the info required once the connection is made to upload, but do
not understand why i just cannot input any address in a new connection

Again many thanks for your help, but it has to be basic, if i knew about web
design i would not be using publisher, i would use dreamweaver / FP etc
--
brelade


"Leythos" wrote:

> In article <2A59A3B9-D465-4D7F-8B65-825C660B3F69@microsoft.com>,
> brelade@discussions.microsoft.com says...
> > I take on board the ease in which to upload with network connections,
> > (currently am doing it this way), BUT as i mentioned it will only allow an
> > ftp address to connect, which is fine for uploading in that format, (web site
> > uploads ok), but i have a response form included in my site, and therefore
> > the site HAS TO BE in HTTP for the included form to work.
>
> FTP is a a method to move files, any file, and it doesn't care about the
> contents. You can upload your RESPONSE FORM via FTP without any problem.
>
> Now if you wanted to write "I need to fill out my response form using
> FTP and it doesn't work" - that would be true, but then neither would
> drag/drop.
>
> You need to undstand that you CAN FTP your folder with ALL of your site
> from your computer to your WEB server and it will work, it's just like a
> Drag/Drop....
>
> Next thing you need to learn is how to write real website code without
> using FP, you can do everything in NotePad also.
>
> --
>
> Leythos
> - Igitur qui desiderat pacem, praeparet bellum.
> - Calling an illegal alien an "undocumented worker" is like calling a
> drug dealer an "unlicensed pharmacist"
> spam999free@rrohio.com (remove 999 for proper email address)
>

Steve many thanks - no joy
--
brelade


"Steve Easton" wrote:

> I've never used publisher but,
> instead of trying to add ftp://breladecockerspaniels.co.uk
> to network places, try adding
> www.breladecockerspaniels.co.uk
>
>
>
> --
>
> Steve Easton
> Microsoft MVP FrontPage
> FP Cleaner
> http://www.95isalive.com/fixes/fpclean.htm
> Hit Me FP
> http://www.95isalive.com/fixes/HitMeFP.htm
>
> "brelade" <brelade@discussions.microsoft.com> wrote in message
> news:28319072-734A-4BD1-8F68-74B2590AE4F4@microsoft.com...
> >I am using MS Publisher 2007, and i am trying to connect to my server
> > (1and1.co.uk)
> >
> > I am having no peroblem in getting site uploaded and on the the web, but at
> > present it is not in the correct format for the response form on my contact
> > page to work, all other functions work ok, but i draw your attension the the
> > response from Microsoft regarding this form and http.
> > I have used wiseftp / filezilla, and an currently uploading to my server via
> > add new network connection on my computer, but all in ftp.
> > --
> > brelade
> >
> >
> > "Steve Easton" wrote:
> >
> >> What "program" are you using to try to publish?
> >>
> >>
> >> --
> >>
> >> Steve Easton
> >> Microsoft MVP FrontPage
> >> FP Cleaner
> >> http://www.95isalive.com/fixes/fpclean.htm
> >> Hit Me FP
> >> http://www.95isalive.com/fixes/HitMeFP.htm
> >>
> >> "brelade" <brelade@discussions.microsoft.com> wrote in message
> >> news:AC5CA151-222C-414C-815C-27918439B86E@microsoft.com...
> >> >I have posted this question several times with no takers.
> >> >
> >> > I am trying to establish a connection to my web server in http, with add new
> >> > network connection, it will only accept an address in ftp.
> >> > Is there a reason why i cannot input an http address.
> >> >
> >> > With XP in was in my network places, but the ability has been removed in
> >> > Vista.
> >> >
> >> > I have manage to establish a network connect with my web server by "add
> >> > Network Location", but with Vista I can only find an ftp:// way of uploading
> >> > to my web server with add a network:
> >> >
> >> > My web site requires to be uploaded with HTTP uploading protocol with FPSE,
> >> > but when I Specify the location of my website following the on screen
> >> > prompts, it will not allow me to input an http address, below are the
> >> > examples given from the wizard during the add network location process
> >> >
> >> > It gives examples:
> >> > 1. \\server\share (Share folder)
> >> > 2. http://webserver/share ; (Web share)
> >> > 3. ftp://mysite.co.uk (ftp site)
> >> >
> >> > The address I would like to add is: http://breladecockerspaniels.co.uk
> >> >
> >> > When I try to input http://breladecockerspaniels.co.uk ; it returns "the
> >> > folder you entered does not appear to be valid, please choose another".
> >> >
> >> > Many thanks
> >> >
> >> > --
> >> > brelade
> >>
> >>
> >>
>
>
>

Ok,
how about:
ftp://ftp.breladecockerspaniels.co.uk



--

Steve Easton
Microsoft MVP FrontPage
FP Cleaner
http://www.95isalive.com/fixes/fpclean.htm
Hit Me FP
http://www.95isalive.com/fixes/HitMeFP.htm

"brelade" <brelade@discussions.microsoft.com> wrote in message
news:1EE862DD-30CC-4294-B798-4A86E4253B8B@microsoft.com...
> Steve many thanks - no joy
> --
> brelade
>
>
> "Steve Easton" wrote:
>
>> I've never used publisher but,
>> instead of trying to add ftp://breladecockerspaniels.co.uk
>> to network places, try adding
>> www.breladecockerspaniels.co.uk
>>
>>
>>
>> --
>>
>> Steve Easton
>> Microsoft MVP FrontPage
>> FP Cleaner
>> http://www.95isalive.com/fixes/fpclean.htm
>> Hit Me FP
>> http://www.95isalive.com/fixes/HitMeFP.htm
>>
>> "brelade" <brelade@discussions.microsoft.com> wrote in message
>> news:28319072-734A-4BD1-8F68-74B2590AE4F4@microsoft.com...
>> >I am using MS Publisher 2007, and i am trying to connect to my server
>> > (1and1.co.uk)
>> >
>> > I am having no peroblem in getting site uploaded and on the the web, but at
>> > present it is not in the correct format for the response form on my contact
>> > page to work, all other functions work ok, but i draw your attension the the
>> > response from Microsoft regarding this form and http.
>> > I have used wiseftp / filezilla, and an currently uploading to my server via
>> > add new network connection on my computer, but all in ftp.
>> > --
>> > brelade
>> >
>> >
>> > "Steve Easton" wrote:
>> >
>> >> What "program" are you using to try to publish?
>> >>
>> >>
>> >> --
>> >>
>> >> Steve Easton
>> >> Microsoft MVP FrontPage
>> >> FP Cleaner
>> >> http://www.95isalive.com/fixes/fpclean.htm
>> >> Hit Me FP
>> >> http://www.95isalive.com/fixes/HitMeFP.htm
>> >>
>> >> "brelade" <brelade@discussions.microsoft.com> wrote in message
>> >> news:AC5CA151-222C-414C-815C-27918439B86E@microsoft.com...
>> >> >I have posted this question several times with no takers.
>> >> >
>> >> > I am trying to establish a connection to my web server in http, with add new
>> >> > network connection, it will only accept an address in ftp.
>> >> > Is there a reason why i cannot input an http address.
>> >> >
>> >> > With XP in was in my network places, but the ability has been removed in
>> >> > Vista.
>> >> >
>> >> > I have manage to establish a network connect with my web server by "add
>> >> > Network Location", but with Vista I can only find an ftp:// way of uploading
>> >> > to my web server with add a network:
>> >> >
>> >> > My web site requires to be uploaded with HTTP uploading protocol with FPSE,
>> >> > but when I Specify the location of my website following the on screen
>> >> > prompts, it will not allow me to input an http address, below are the
>> >> > examples given from the wizard during the add network location process
>> >> >
>> >> > It gives examples:
>> >> > 1. \\server\share (Share folder)
>> >> > 2. http://webserver/share ; (Web share)
>> >> > 3. ftp://mysite.co.uk (ftp site)
>> >> >
>> >> > The address I would like to add is: http://breladecockerspaniels.co.uk
>> >> >
>> >> > When I try to input http://breladecockerspaniels.co.uk ; it returns "the
>> >> > folder you entered does not appear to be valid, please choose another".
>> >> >
>> >> > Many thanks
>> >> >
>> >> > --
>> >> > brelade
>> >>
>> >>
>> >>
>>
>>
>>

Problem is, that ftp:// breaks your form

--

Steve Easton
Microsoft MVP FrontPage
FP Cleaner
http://www.95isalive.com/fixes/fpclean.htm
Hit Me FP
http://www.95isalive.com/fixes/HitMeFP.htm


"brelade" <brelade@discussions.microsoft.com> wrote in message
news:F9336424-D1DF-4CFC-8651-EFDD47080C53@microsoft.com...
> You have gone over my head.
>
> All i know is i am getting error 404 on my "Contact Us" page when i submit
> form, the form has uploaded but will not work, i have contacted my server: no
> joy, i have posted on Publisher new group, no one there knows about Vista and
> how to upload in http, told to post in Vista news group, Vista network
> disscusions no joy there.
>
> i have done my research with Microsoft and have been told ftp will corrupt
> FPSE, it needs to be in http!!!!!!!!!. AM I THE ONLY PERSON IN THE WORLD that
> has Publisher & response form on it using Vista.
>
> I am presently uploading in ftp as a stop gap to get it on the web, but need
> this response form to work, which it has done in the past with (XP) but i
> cannot find away to point my site to my server with the address
> http://breladecockerspaniels.co.uk
>
> I have all the info required once the connection is made to upload, but do
> not understand why i just cannot input any address in a new connection
>
> Again many thanks for your help, but it has to be basic, if i knew about web
> design i would not be using publisher, i would use dreamweaver / FP etc
> --
> brelade
>
>
> "Leythos" wrote:
>
>> In article <2A59A3B9-D465-4D7F-8B65-825C660B3F69@microsoft.com>,
>> brelade@discussions.microsoft.com says...
>> > I take on board the ease in which to upload with network connections,
>> > (currently am doing it this way), BUT as i mentioned it will only allow an
>> > ftp address to connect, which is fine for uploading in that format, (web site
>> > uploads ok), but i have a response form included in my site, and therefore
>> > the site HAS TO BE in HTTP for the included form to work.
>>
>> FTP is a a method to move files, any file, and it doesn't care about the
>> contents. You can upload your RESPONSE FORM via FTP without any problem.
>>
>> Now if you wanted to write "I need to fill out my response form using
>> FTP and it doesn't work" - that would be true, but then neither would
>> drag/drop.
>>
>> You need to undstand that you CAN FTP your folder with ALL of your site
>> from your computer to your WEB server and it will work, it's just like a
>> Drag/Drop....
>>
>> Next thing you need to learn is how to write real website code without
>> using FP, you can do everything in NotePad also.
>>
>> --
>>
>> Leythos
>> - Igitur qui desiderat pacem, praeparet bellum.
>> - Calling an illegal alien an "undocumented worker" is like calling a
>> drug dealer an "unlicensed pharmacist"
>> spam999free@rrohio.com (remove 999 for proper email address)
>>

In article <F9336424-D1DF-4CFC-8651-EFDD47080C53@microsoft.com>,
brelade@discussions.microsoft.com says...
> i have done my research with Microsoft and have been told ftp will corrupt
> FPSE, it needs to be in http!!!!!!!!!. AM I THE ONLY PERSON IN THE WORLD that
> has Publisher & response form on it using Vista.

Publisher is a graphics program, not a web page layout program.

As for FTP corrupting - pardon me, but that's BULL-SHIp.

No person designing websites used Publisher to PUSH content to the site,
at least not any person that cares.

FTP IS THE PROPER METHOD AND WORKS NO MATTER WHAT PLATFORM YOU DESIGN
IN.

--

Leythos
- Igitur qui desiderat pacem, praeparet bellum.
- Calling an illegal alien an "undocumented worker" is like calling a
drug dealer an "unlicensed pharmacist"
spam999free@rrohio.com (remove 999 for proper email address)

Leythos.

I know Publisher is not a proper web design programe, but it has the ability
to produce a resonable web site for the novice builder.

FTP will not work with a form on Publisher, it has to be in http for FPSE to
work.

If your domain hosting account has FrontPage Server Extensions (FPSE)
installed you can upload your web site files in the HTTP Protocol. When FPSE
is loaded on your account it is recommended that you use HTTP uploads
exclusively because using FTP at any time may corrupt the FPSE files.

You must understand that the server processing functionality provided by
FPSE requires HTTP publishing to deliver that functionality - (from Microsoft)

I do not dissagree that ftp is the correct format, but unfortunatly with
publisher & forms in must be http for it to work.

I either get error 404 or FPSE cannot run from this page.

Back to the original question: Why can't i input an http address in add a
new network connection.

In add new connection it ask's: Specify the location of your website / type
the address of the web site, ftp location or network location that this
shortcut will open.

I don't know if you have tried to add an http address, but when i do it,
it returns "the folder you entered does not appear to be valid, please
choose another".

Cheers
--
brelade


"Leythos" wrote:

> In article <F9336424-D1DF-4CFC-8651-EFDD47080C53@microsoft.com>,
> brelade@discussions.microsoft.com says...
> > i have done my research with Microsoft and have been told ftp will corrupt
> > FPSE, it needs to be in http!!!!!!!!!. AM I THE ONLY PERSON IN THE WORLD that
> > has Publisher & response form on it using Vista.
>
> Publisher is a graphics program, not a web page layout program.
>
> As for FTP corrupting - pardon me, but that's BULL-SHIp.
>
> No person designing websites used Publisher to PUSH content to the site,
> at least not any person that cares.
>
> FTP IS THE PROPER METHOD AND WORKS NO MATTER WHAT PLATFORM YOU DESIGN
> IN.
>
> --
>
> Leythos
> - Igitur qui desiderat pacem, praeparet bellum.
> - Calling an illegal alien an "undocumented worker" is like calling a
> drug dealer an "unlicensed pharmacist"
> spam999free@rrohio.com (remove 999 for proper email address)
>