Windows Vista Forums
Vista Forums Home Join Vista Forums Windows 7 Forum Vista Tutorials Tags
Welcome to Windows Vista Forums. Our forum is dedicated to helping you find solutions with any problems, errors or issues you are experiencing with Windows Vista. The Vista forum also covers news and updates and has an extensive Windows Vista tutorial section that covers a wide range of tips and tricks.

Go Back   Vista Forums > Vista Newsgroups > Vista hardware & devices

Vista - Esata drive not recognized

Reply
 
Old 01-13-2008   #1 (permalink)
craig


 
 

Esata drive not recognized

I just installed an esata (Silicon Image SiI 3512 SATALink Controller)
Its recognized by vista but I don't see the drive. Do I need to attach a
cable fromthe card to the esata port.
I have a Dell 8400, no esata port on motherboard.
--
craig

My System SpecsSystem Spec
Old 01-13-2008   #2 (permalink)
Colin Barnhorst


 
 

Re: Esata drive not recognized

Have you gone into Drive Manager and formatted it and assigned a drive
letter?

"craig" <craig@xxxxxx> wrote in message
news:9F2D21F8-B27C-41C9-B48B-71A652AEBF87@xxxxxx
Quote:

>I just installed an esata (Silicon Image SiI 3512 SATALink Controller)
> Its recognized by vista but I don't see the drive. Do I need to attach a
> cable fromthe card to the esata port.
> I have a Dell 8400, no esata port on motherboard.
> --
> craig
My System SpecsSystem Spec
Old 01-13-2008   #3 (permalink)
craig


 
 

Re: Esata drive not recognized

the drive does not even show up in disk management.
--
craig


"Colin Barnhorst" wrote:
Quote:

> Have you gone into Drive Manager and formatted it and assigned a drive
> letter?
>
> "craig" <craig@xxxxxx> wrote in message
> news:9F2D21F8-B27C-41C9-B48B-71A652AEBF87@xxxxxx
Quote:

> >I just installed an esata (Silicon Image SiI 3512 SATALink Controller)
> > Its recognized by vista but I don't see the drive. Do I need to attach a
> > cable fromthe card to the esata port.
> > I have a Dell 8400, no esata port on motherboard.
> > --
> > craig
>
My System SpecsSystem Spec
Old 01-13-2008   #4 (permalink)
Colin Barnhorst


 
 

Re: Esata drive not recognized

Then what do mean by "its recognized by Vista"?

You might check the BIOS to make sure that the external port is enabled.

"craig" <craig@xxxxxx> wrote in message
news:9F2D21F8-B27C-41C9-B48B-71A652AEBF87@xxxxxx
Quote:

>I just installed an esata (Silicon Image SiI 3512 SATALink Controller)
> Its recognized by vista but I don't see the drive. Do I need to attach a
> cable fromthe card to the esata port.
> I have a Dell 8400, no esata port on motherboard.
> --
> craig
My System SpecsSystem Spec
Old 01-13-2008   #5 (permalink)
peter


 
 

Re: Esata drive not recognized

You have a SATA Controller card that you installed in a PCI slot..right??
Does it have an External SATA port sticking out the back of the computer??
or did it come with an extension that you need to plug into the controller
and attach to a vacant PCI slot??
Is the card recognized in your BIOS?? Does it show the Drive connected??
peter

--
DISCLAIMER: If you find a posting or message from me
offensive, inappropriate, or disruptive, please ignore it.
If you don't know how to ignore a posting, complain to
me and I will be only too happy to demonstrate... ;-)


"craig" <craig@xxxxxx> wrote in message
news:9F2D21F8-B27C-41C9-B48B-71A652AEBF87@xxxxxx
Quote:

> I just installed an esata (Silicon Image SiI 3512 SATALink Controller)
> Its recognized by vista but I don't see the drive. Do I need to attach a
> cable fromthe card to the esata port.
> I have a Dell 8400, no esata port on motherboard.
> --
> craig
My System SpecsSystem Spec
Old 01-13-2008   #6 (permalink)
Patrick


 
 

Re: Esata drive not recognized

Yep still need the cable hooked up to the card and HD


"craig" <craig@xxxxxx> wrote in message
news:9F2D21F8-B27C-41C9-B48B-71A652AEBF87@xxxxxx
Quote:

>I just installed an esata (Silicon Image SiI 3512 SATALink Controller)
> Its recognized by vista but I don't see the drive. Do I need to attach a
> cable fromthe card to the esata port.
> I have a Dell 8400, no esata port on motherboard.
> --
> craig
My System SpecsSystem Spec
Old 01-14-2008   #7 (permalink)
craig


 
 

Re: Esata drive not recognized

The Sata Controller is plugged into a pci slot. E sata in an enclosure is
hooked up to a sata port on the back of the card. Hard drive starts up with
the computer a whirls and beeps when turns on. Controller card is seen at
start up and in device manager and is active (working properly). BUT i dont
see a hard drive listed. Do i need to run a esata driver on something else?
--
craig


"peter" wrote:
Quote:

> You have a SATA Controller card that you installed in a PCI slot..right??
> Does it have an External SATA port sticking out the back of the computer??
> or did it come with an extension that you need to plug into the controller
> and attach to a vacant PCI slot??
> Is the card recognized in your BIOS?? Does it show the Drive connected??
> peter
>
> --
> DISCLAIMER: If you find a posting or message from me
> offensive, inappropriate, or disruptive, please ignore it.
> If you don't know how to ignore a posting, complain to
> me and I will be only too happy to demonstrate... ;-)
>
>
> "craig" <craig@xxxxxx> wrote in message
> news:9F2D21F8-B27C-41C9-B48B-71A652AEBF87@xxxxxx
Quote:

> > I just installed an esata (Silicon Image SiI 3512 SATALink Controller)
> > Its recognized by vista but I don't see the drive. Do I need to attach a
> > cable fromthe card to the esata port.
> > I have a Dell 8400, no esata port on motherboard.
> > --
> > craig
>
My System SpecsSystem Spec
Old 01-14-2008   #8 (permalink)
Arnaud


 
 

Re: Esata drive not recognized

I have the same problem. The disk is recognised in Device manager, but there
is no thumbnail in My Computer and therefore cannot use the drive. Any advise?

Thanks
Arnaud

"Patrick" wrote:
Quote:

> Yep still need the cable hooked up to the card and HD
>
>
> "craig" <craig@xxxxxx> wrote in message
> news:9F2D21F8-B27C-41C9-B48B-71A652AEBF87@xxxxxx
Quote:

> >I just installed an esata (Silicon Image SiI 3512 SATALink Controller)
> > Its recognized by vista but I don't see the drive. Do I need to attach a
> > cable fromthe card to the esata port.
> > I have a Dell 8400, no esata port on motherboard.
> > --
> > craig
>
>
My System SpecsSystem Spec
Reply

Thread Tools


Similar Threads
Thread Forum
eSATA drive Vista General
eSATA not being recognized Vista hardware & devices
Esata drive not recognized - Arnau Vista hardware & devices
Install VHP x64 from eSATA drive possible? Vista installation & setup
Boot from eSATA drive Vista General


Vista Forums is an independent web site and has not been authorized,
sponsored, or otherwise approved by Microsoft Corporation.
"Windows Vista", the Start Orb, and related materials are trademarks of Microsoft Corp.
© Designer Media Ltd

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46