After installing an upgrade to 5600 I tried to install
- a compact flash
- 2 different usb sticks
- a cf card, sd card, memory stick card reader on USB

All have the same issue. The USB storage driver installs but the device
driver underneath fails with the error
"Disk Drive"
The drivers for this device are not installed. (Code 28)
The parameter is incorrect.

This are standard USB sticks or Compact flash cards. Do i really need a
driver from the manufacturer for them, should those standard drivers not be
included?

the events I get are like:
Driver Management concluded the process to install driver
FileRepository\disk.inf_21f4651a\disk.inf for Device Instance ID
USBSTOR\DISK&VEN_GENERIC&PROD_USB_SD_READER&REV_1.00\058F312D81B&0 with the
following status: 87.



Any help is appreciated!

Hi!

I run Vista RC1 32-bits.
I have the same problem but the code is 10.
So, USB does not work.
Only USB for mouse and keyboard works well.

But all my USB work fine with:

Vista Build 5384 64-bits
Vista RC1 64-bits
Windows XP.

Bonne journée! Roger


"Chris" <ceckl@nospam.nospam> wrote in message
news:F183FE59-CD9B-4AD1-AD88-ACB63952252C@microsoft.com...
> After installing an upgrade to 5600 I tried to install
> - a compact flash
> - 2 different usb sticks
> - a cf card, sd card, memory stick card reader on USB
>
> All have the same issue. The USB storage driver installs but the device
> driver underneath fails with the error
> "Disk Drive"
> The drivers for this device are not installed. (Code 28)
> The parameter is incorrect.
>
> This are standard USB sticks or Compact flash cards. Do i really need a
> driver from the manufacturer for them, should those standard drivers not
> be
> included?
>
> the events I get are like:
> Driver Management concluded the process to install driver
> FileRepository\disk.inf_21f4651a\disk.inf for Device Instance ID
> USBSTOR\DISK&VEN_GENERIC&PROD_USB_SD_READER&REV_1.00\058F312D81B&0 with
> the
> following status: 87.
>
> Any help is appreciated!

Not an answer, but more evidence. My Nikon slide scanner worked just fine in
the prior beta build, but I'm, seeing the same message from 5600.

"Chris" wrote:

> After installing an upgrade to 5600 I tried to install
> - a compact flash
> - 2 different usb sticks
> - a cf card, sd card, memory stick card reader on USB
>
> All have the same issue. The USB storage driver installs but the device
> driver underneath fails with the error
> "Disk Drive"
> The drivers for this device are not installed. (Code 28)
> The parameter is incorrect.
>
> This are standard USB sticks or Compact flash cards. Do i really need a
> driver from the manufacturer for them, should those standard drivers not be
> included?
>
> the events I get are like:
> Driver Management concluded the process to install driver
> FileRepository\disk.inf_21f4651a\disk.inf for Device Instance ID
> USBSTOR\DISK&VEN_GENERIC&PROD_USB_SD_READER&REV_1.00\058F312D81B&0 with the
> following status: 87.
>
> Any help is appreciated!

Please do bug reports on this. I'm using all kinds of flash drives on RC1, no problem.

--PA


"rogerlebo" <no.spam@no.spam> wrote in message news:uD4$SXP4GHA.1196@TK2MSFTNGP02.phx.gbl...
> Hi!
>
> I run Vista RC1 32-bits.
> I have the same problem but the code is 10.
> So, USB does not work.
> Only USB for mouse and keyboard works well.
>
> But all my USB work fine with:
>
> Vista Build 5384 64-bits
> Vista RC1 64-bits
> Windows XP.
>
> Bonne journee! Roger
>
>
> "Chris" <ceckl@nospam.nospam> wrote in message news:F183FE59-CD9B-4AD1-AD88-ACB63952252C@microsoft.com...
>> After installing an upgrade to 5600 I tried to install
>> - a compact flash
>> - 2 different usb sticks
>> - a cf card, sd card, memory stick card reader on USB
>>
>> All have the same issue. The USB storage driver installs but the device
>> driver underneath fails with the error
>> "Disk Drive"
>> The drivers for this device are not installed. (Code 28)
>> The parameter is incorrect.
>>
>> This are standard USB sticks or Compact flash cards. Do i really need a
>> driver from the manufacturer for them, should those standard drivers not be
>> included?
>>
>> the events I get are like:
>> Driver Management concluded the process to install driver
>> FileRepository\disk.inf_21f4651a\disk.inf for Device Instance ID
>> USBSTOR\DISK&VEN_GENERIC&PROD_USB_SD_READER&REV_1.00\058F312D81B&0 with the
>> following status: 87.
>>
>> Any help is appreciated!
>

Build 5728 fixed the problem. It even let me install Nikon scan 4 normally
instead of having to find setup.exe and telling vista it was an xp program.
driver installed normally, all is good with this release and usb on my system.

"Dennis" wrote:

> Not an answer, but more evidence. My Nikon slide scanner worked just fine in
> the prior beta build, but I'm, seeing the same message from 5600.
>
> "Chris" wrote:
>
> > After installing an upgrade to 5600 I tried to install
> > - a compact flash
> > - 2 different usb sticks
> > - a cf card, sd card, memory stick card reader on USB
> >
> > All have the same issue. The USB storage driver installs but the device
> > driver underneath fails with the error
> > "Disk Drive"
> > The drivers for this device are not installed. (Code 28)
> > The parameter is incorrect.
> >
> > This are standard USB sticks or Compact flash cards. Do i really need a
> > driver from the manufacturer for them, should those standard drivers not be
> > included?
> >
> > the events I get are like:
> > Driver Management concluded the process to install driver
> > FileRepository\disk.inf_21f4651a\disk.inf for Device Instance ID
> > USBSTOR\DISK&VEN_GENERIC&PROD_USB_SD_READER&REV_1.00\058F312D81B&0 with the
> > following status: 87.
> >
> > Any help is appreciated!

I will try 5728 towards end of next week and will give feedback then.

Thanks

"Dennis" wrote:

> Build 5728 fixed the problem. It even let me install Nikon scan 4 normally
> instead of having to find setup.exe and telling vista it was an xp program.
> driver installed normally, all is good with this release and usb on my system.
>
> "Dennis" wrote:
>
> > Not an answer, but more evidence. My Nikon slide scanner worked just fine in
> > the prior beta build, but I'm, seeing the same message from 5600.
> >
> > "Chris" wrote:
> >
> > > After installing an upgrade to 5600 I tried to install
> > > - a compact flash
> > > - 2 different usb sticks
> > > - a cf card, sd card, memory stick card reader on USB
> > >
> > > All have the same issue. The USB storage driver installs but the device
> > > driver underneath fails with the error
> > > "Disk Drive"
> > > The drivers for this device are not installed. (Code 28)
> > > The parameter is incorrect.
> > >
> > > This are standard USB sticks or Compact flash cards. Do i really need a
> > > driver from the manufacturer for them, should those standard drivers not be
> > > included?
> > >
> > > the events I get are like:
> > > Driver Management concluded the process to install driver
> > > FileRepository\disk.inf_21f4651a\disk.inf for Device Instance ID
> > > USBSTOR\DISK&VEN_GENERIC&PROD_USB_SD_READER&REV_1.00\058F312D81B&0 with the
> > > following status: 87.
> > >
> > > Any help is appreciated!

I got the same error with all USB Mass Storage devices from flash drives to
iPods. I was able to successfully get them working by uninstalling the
software for my Netgear SC101 network storage unit, which doesn't work in
Vista anyway. Perhaps there is a similar device with bad drivers on your
system mucking things up as well.

Hope this helps,

Phil

"Chris" wrote:

> After installing an upgrade to 5600 I tried to install
> - a compact flash
> - 2 different usb sticks
> - a cf card, sd card, memory stick card reader on USB
>
> All have the same issue. The USB storage driver installs but the device
> driver underneath fails with the error
> "Disk Drive"
> The drivers for this device are not installed. (Code 28)
> The parameter is incorrect.
>
> This are standard USB sticks or Compact flash cards. Do i really need a
> driver from the manufacturer for them, should those standard drivers not be
> included?
>
> the events I get are like:
> Driver Management concluded the process to install driver
> FileRepository\disk.inf_21f4651a\disk.inf for Device Instance ID
> USBSTOR\DISK&VEN_GENERIC&PROD_USB_SD_READER&REV_1.00\058F312D81B&0 with the
> following status: 87.
>
> Any help is appreciated!

Thanks. This solved my problems. It must have been a conflict

"Phil Keogh" wrote:

> I got the same error with all USB Mass Storage devices from flash drives to
> iPods. I was able to successfully get them working by uninstalling the
> software for my Netgear SC101 network storage unit, which doesn't work in
> Vista anyway. Perhaps there is a similar device with bad drivers on your
> system mucking things up as well.
>
> Hope this helps,
>
> Phil
>
> "Chris" wrote:
>
> > After installing an upgrade to 5600 I tried to install
> > - a compact flash
> > - 2 different usb sticks
> > - a cf card, sd card, memory stick card reader on USB
> >
> > All have the same issue. The USB storage driver installs but the device
> > driver underneath fails with the error
> > "Disk Drive"
> > The drivers for this device are not installed. (Code 28)
> > The parameter is incorrect.
> >
> > This are standard USB sticks or Compact flash cards. Do i really need a
> > driver from the manufacturer for them, should those standard drivers not be
> > included?
> >
> > the events I get are like:
> > Driver Management concluded the process to install driver
> > FileRepository\disk.inf_21f4651a\disk.inf for Device Instance ID
> > USBSTOR\DISK&VEN_GENERIC&PROD_USB_SD_READER&REV_1.00\058F312D81B&0 with the
> > following status: 87.
> >
> > Any help is appreciated!

I had similar problems with my XP to Vista upgrade. Seems the problem was a conflict with the software / drivers for my Netgear SC101 which was left on the machine after the upgrade. I removed the software and my machine now sees my USB storage devices.

GREAT ! I had the same issue. Netgear SC101 software was the problem. Thank
you !

"Phil Keogh" wrote:

> I got the same error with all USB Mass Storage devices from flash drives to
> iPods. I was able to successfully get them working by uninstalling the
> software for my Netgear SC101 network storage unit, which doesn't work in
> Vista anyway. Perhaps there is a similar device with bad drivers on your
> system mucking things up as well.
>
> Hope this helps,
>
> Phil
>
> "Chris" wrote:
>
> > After installing an upgrade to 5600 I tried to install
> > - a compact flash
> > - 2 different usb sticks
> > - a cf card, sd card, memory stick card reader on USB
> >
> > All have the same issue. The USB storage driver installs but the device
> > driver underneath fails with the error
> > "Disk Drive"
> > The drivers for this device are not installed. (Code 28)
> > The parameter is incorrect.
> >
> > This are standard USB sticks or Compact flash cards. Do i really need a
> > driver from the manufacturer for them, should those standard drivers not be
> > included?
> >
> > the events I get are like:
> > Driver Management concluded the process to install driver
> > FileRepository\disk.inf_21f4651a\disk.inf for Device Instance ID
> > USBSTOR\DISK&VEN_GENERIC&PROD_USB_SD_READER&REV_1.00\058F312D81B&0 with the
> > following status: 87.
> >
> > Any help is appreciated!