Windows Vista Forums
Vista Forums Home Join Vista Forums Windows 7 Forum Vista Tutorials Tags
Welcome to Windows Vista Forums. Our forum is dedicated to helping you find solutions with any problems, errors or issues you are experiencing with Windows Vista. The Vista forum also covers news and updates and has an extensive Windows Vista tutorial section that covers a wide range of tips and tricks.

Go Back   Vista Forums > Vista Newsgroups > Vista hardware & devices

Vista - Hauppauge analogue TV card drivers for Vista

Reply
 
Old 10-16-2006   #1 (permalink)
Chirag


 
 

Hauppauge analogue TV card drivers for Vista

Vista install will not see the Hauppauge analogue TV card and cannot find the
correct drivers. XP driver does not work and no support from Hauppauge
despite saveral emails. Any suggestions or link to working Vista drivers for
hauppauge analogue TV card?

My System SpecsSystem Spec
Old 10-16-2006   #2 (permalink)
JW


 
 

Re: Hauppauge analogue TV card drivers for Vista

Which Hauppauge card do you have? I have a 150 analog card and Vista
properly installs Vista drivers for it that work with Media Center. Check
the Hauppauge Website to see if there are Vista drivers for your card.
I have also installed the XP drivers and the WinTV2K application porgram
using XP compatibility mode and that works fine also.

"Chirag" <Chirag@discussions.microsoft.com> wrote in message
news:0CBE0613-1BB0-4E2A-8241-73BAB033F863@microsoft.com...
> Vista install will not see the Hauppauge analogue TV card and cannot find
> the
> correct drivers. XP driver does not work and no support from Hauppauge
> despite saveral emails. Any suggestions or link to working Vista drivers
> for
> hauppauge analogue TV card?



My System SpecsSystem Spec
Old 10-16-2006   #3 (permalink)


 
 

Sorry but you will have to run a dual boot or go back to the 32bit version of Vista, as Hauppauge have some drivers available for these located here:

http://www.hauppauge.com/pages/support/vista.html

Other than that you will have to wait just like me.
My System SpecsSystem Spec
Old 10-16-2006   #4 (permalink)
Jelle


 
 

Re: Hauppauge analogue TV card drivers for Vista

JW schreef:
> Which Hauppauge card do you have? I have a 150 analog card and Vista
> properly installs Vista drivers for it that work with Media Center. Check
> the Hauppauge Website to see if there are Vista drivers for your card.
> I have also installed the XP drivers and the WinTV2K application porgram
> using XP compatibility mode and that works fine also.
>
> "Chirag" <Chirag@discussions.microsoft.com> wrote in message
> news:0CBE0613-1BB0-4E2A-8241-73BAB033F863@microsoft.com...
>> Vista install will not see the Hauppauge analogue TV card and cannot find
>> the
>> correct drivers. XP driver does not work and no support from Hauppauge
>> despite saveral emails. Any suggestions or link to working Vista drivers
>> for
>> hauppauge analogue TV card?

>
>

Ye i have a WinTV pci-FM, and winupdate finds drivers for that one ,
much to my happiness as I expected this card to become obsolete for
Vista. So which card you have?
My System SpecsSystem Spec
Reply

Thread Tools


Similar Threads
Thread Forum
Hauppauge WinTV PVR USB drivers (3.4b) available Vista music pictures video
Hauppauge WinTV PVR USB drivers (3.4b) available Vista General
Hauppauge WinTV PVR USB drivers (3.4b) available Vista hardware & devices
Hauppauge Nova-T Drivers Vista hardware & devices
Hauppauge non hardware tuner card Vista General


Vista Forums is an independent web site and has not been authorized,
sponsored, or otherwise approved by Microsoft Corporation.
"Windows Vista", the Start Orb, and related materials are trademarks of Microsoft Corp.
© Designer Media Ltd

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46