Hi all

AMD 64 X2 dual system with 4 gb ram (A8N-SLI Premium board) with Vista 32 bit
Vista see my USB key when I insert it but I get this error:



Device driver software was not successfully installed

I see the "Safely Remove Hardware" icon but this will not respond when I use it

What can I try to fix this
My HP K60 printer/scanner is working with USB

Thanks


--
Regards Ron de Bruin
http://www.rondebruin.nl

Ron de Bruin wrote:
> Hi all
>
> AMD 64 X2 dual system with 4 gb ram (A8N-SLI Premium board) with Vista
> 32 bit Vista see my USB key when I insert it but I get this error:
>
> Device driver software was not successfully installed
>
> I see the "Safely Remove Hardware" icon but this will not respond when I
> use it
>
> What can I try to fix this
> My HP K60 printer/scanner is working with USB

Try other USB slots...

(Check within the device manager for IRQ collisions...)


HTH - rOy

Hi Roy

No luck

I have try other keys also and all have the same problem

Thanks

--
Regards Ron de Bruin
http://www.rondebruin.nl


"Roy Coorne" <roy.spam.coorne@gmx.net> wrote in message news:uiLViXUEHHA.4312@TK2MSFTNGP06.phx.gbl...
> Ron de Bruin wrote:
>> Hi all
>>
>> AMD 64 X2 dual system with 4 gb ram (A8N-SLI Premium board) with Vista
>> 32 bit Vista see my USB key when I insert it but I get this error:
>>
>> Device driver software was not successfully installed
>>
>> I see the "Safely Remove Hardware" icon but this will not respond when I
>> use it
>>
>> What can I try to fix this
>> My HP K60 printer/scanner is working with USB
>
> Try other USB slots...
>
> (Check within the device manager for IRQ collisions...)
>
>
> HTH - rOy

"Ron de Bruin" <rondebruin@kabelfoon.nl> wrote:
>Hi all
>
>AMD 64 X2 dual system with 4 gb ram (A8N-SLI Premium board) with Vista 32 bit
>Vista see my USB key when I insert it but I get this error:
>
>Device driver software was not successfully installed
>
>I see the "Safely Remove Hardware" icon but this will not respond when I use it
>
>What can I try to fix this
>My HP K60 printer/scanner is working with USB
>
>Thanks
>
>
>--
>Regards Ron de Bruin
>http://www.rondebruin.nl
>
>
I'm seeing the same problem. The memory stick appear (as "(FS) FLASH DISK" in
device mgr), and I can browse it, copy to it etc - 5 seconds later Vista
removes it and prompts for drivers to be installed.

I sense a bug.

Ron de Bruin wrote:
> Hi Roy
>
> No luck
>
> I have try other keys also and all have the same problem
>
> Thanks
>

Did you check the BIOS settings related to USB and to hard disks?

HTH - Roy

I can not use it Jon

If I wait a long time I see F in the Explorer

Do you have a AMD system ?
With Win XP there was no problem on the same system

--
Regards Ron de Bruin
http://www.rondebruin.nl


"Jon Abbott" <spam@sirbod.freeserve.co.uk> wrote in message news:0dqdnWw2-vfPBfTYnZ2dnUVZ8sOdnZ2d@bt.com...
> "Ron de Bruin" <rondebruin@kabelfoon.nl> wrote:
>>Hi all
>>
>>AMD 64 X2 dual system with 4 gb ram (A8N-SLI Premium board) with Vista 32 bit
>>Vista see my USB key when I insert it but I get this error:
>>
>>Device driver software was not successfully installed
>>
>>I see the "Safely Remove Hardware" icon but this will not respond when I use it
>>
>>What can I try to fix this
>>My HP K60 printer/scanner is working with USB
>>
>>Thanks
>>
>>
>>--
>>Regards Ron de Bruin
>>http://www.rondebruin.nl
>>
>>
> I'm seeing the same problem. The memory stick appear (as "(FS) FLASH DISK" in
> device mgr), and I can browse it, copy to it etc - 5 seconds later Vista
> removes it and prompts for drivers to be installed.
>
> I sense a bug.
>

Yes, there where no problems last week when I run Win XP on the same system

--
Regards Ron de Bruin
http://www.rondebruin.nl


"Roy Coorne" <roy.spam.coorne@gmx.net> wrote in message news:ewMn8EWEHHA.4620@TK2MSFTNGP04.phx.gbl...
> Ron de Bruin wrote:
>> Hi Roy
>>
>> No luck
>>
>> I have try other keys also and all have the same problem
>>
>> Thanks
>>
>
> Did you check the BIOS settings related to USB and to hard disks?
>
> HTH - Roy

"Ron de Bruin" <rondebruin@kabelfoon.nl> wrote:
>I can not use it Jon
>
>If I wait a long time I see F in the Explorer
>
>Do you have a AMD system ?
>With Win XP there was no problem on the same system
>
>--
>Regards Ron de Bruin
>http://www.rondebruin.nl
>
Yes, AMD with Vista x86 RTM. Tried the same memory stick on an Intel with
Vista x86 RTM and it worked fine.

The chipset is an nForce, could be a bug in the drivers - nVidia drivers have
been pretty aweful throughout the Vista beta.

Open Device Manager and expand "Portable Device", then plug the device in.
You'll see it appear and then immediately disappear. We'll have to file a bug
report on it.

Thanks Jon

Glad you have the same problem <g>

> Open Device Manager and expand "Portable Device", then plug the device in.
> You'll see it appear and then immediately disappear. We'll have to file a bug
> report on it.

I will report it also


--
Regards Ron de Bruin
http://www.rondebruin.nl


"Jon Abbott" <spam@sirbod.freeserve.co.uk> wrote in message news:If2dnQghTJuQkPfYnZ2dnUVZ8tCdnZ2d@bt.com...
> "Ron de Bruin" <rondebruin@kabelfoon.nl> wrote:
>>I can not use it Jon
>>
>>If I wait a long time I see F in the Explorer
>>
>>Do you have a AMD system ?
>>With Win XP there was no problem on the same system
>>
>>--
>>Regards Ron de Bruin
>>http://www.rondebruin.nl
>>
> Yes, AMD with Vista x86 RTM. Tried the same memory stick on an Intel with
> Vista x86 RTM and it worked fine.
>
> The chipset is an nForce, could be a bug in the drivers - nVidia drivers have
> been pretty aweful throughout the Vista beta.
>
> Open Device Manager and expand "Portable Device", then plug the device in.
> You'll see it appear and then immediately disappear. We'll have to file a bug
> report on it.
>

I have no problem when I put in my 1GB one
"Ron de Bruin" <rondebruin@kabelfoon.nl> wrote in message
news:epTtyvMEHHA.996@TK2MSFTNGP02.phx.gbl...
> Hi all
>
> AMD 64 X2 dual system with 4 gb ram (A8N-SLI Premium board) with Vista 32
> bit Vista see my USB key when I insert it but I get this error:
>
> Device driver software was not successfully installed
>
> I see the "Safely Remove Hardware" icon but this will not respond when I
> use it
>
> What can I try to fix this
> My HP K60 printer/scanner is working with USB
>
> Thanks
>
>
> --
> Regards Ron de Bruin
> http://www.rondebruin.nl
>
>