Windows Vista Forums
Vista Forums Home Join Vista Forums Windows 7 Forum Vista Tutorials Tags
Welcome to Windows Vista Forums. Our forum is dedicated to helping you find solutions with any problems, errors or issues you are experiencing with Windows Vista. The Vista forum also covers news and updates and has an extensive Windows Vista tutorial section that covers a wide range of tips and tricks.

Go Back   Vista Forums > Vista Newsgroups > Vista hardware & devices

Vista - re.dvd rom missing

Reply
 
Old 03-04-2007   #1 (permalink)
Martyn Woodfield


 
 

re.dvd rom missing

I have 1 pioneer DVD Writer and 1 Sony DVD Rom installed on Windows Vista
Ultimate on a fresh install. The Motherboard is an Abit IC7 Max 3. My
problem being that the Bios see both DVD drives on the Secondary Ribbon
i.e. Master and Slave and when the Windows Vista installation is complete
both drives are visible to Vista but when I reboot the system and Vista
restarts then Vista always loses 1 of the DVD drives and only shows 1
installed. If I go to device manager and scan for hardware changes then the
lost drive reappears but again as soon as the computer is rebooted then
Windows Vista loses it again. Any thoughts on this problem.

Thanks Martyn.


My System SpecsSystem Spec
Old 03-05-2007   #2 (permalink)
Floyd


 
 

Cd DVD drives

I have similar problem.

Installed Vista Ultimate & now Cd & DVD drives appear in Device Manager but don't show in My computer. Can't get to them.

Updating driver in Device Manager says Windows has latest driver installed??

Tried a new DVD with a Vista compatible driver & still as above. Not accessible.

I now install new programs from drives in another PC which I access via network. Not very practicle.

EggHeadCafe.com - .NET Developer Portal of Choice
http://www.eggheadcafe.com
My System SpecsSystem Spec
Old 05-31-2007   #3 (permalink)
falc410


 
 

RE: re.dvd rom missing

I have exactly the same problem as you do!
What I did back then was change the jumper settings to Cable Select for both
drives (before I had Master / Slave Jumper). This did the trick, but then
after a month I had the same problem again, even with System Restore I
couldn't get it to work. I have no clue what to do now.

"Martyn Woodfield" wrote:

> I have 1 pioneer DVD Writer and 1 Sony DVD Rom installed on Windows Vista
> Ultimate on a fresh install. The Motherboard is an Abit IC7 Max 3. My
> problem being that the Bios see both DVD drives on the Secondary Ribbon
> i.e. Master and Slave and when the Windows Vista installation is complete
> both drives are visible to Vista but when I reboot the system and Vista
> restarts then Vista always loses 1 of the DVD drives and only shows 1
> installed. If I go to device manager and scan for hardware changes then the
> lost drive reappears but again as soon as the computer is rebooted then
> Windows Vista loses it again. Any thoughts on this problem.
>
> Thanks Martyn.
>
>

My System SpecsSystem Spec
Reply

Thread Tools


Similar Threads
Thread Forum
Missing Windows Installer-How does it go missing? Drivers
Movie Maker 6.0 - publising error "missing files" but files not missing Vista music pictures video
DVD/CD-Rom missing Vista hardware & devices
Missing Drivers That Aren't Really Missing Drivers
Movie Maker - Missing Photos not missing Links Vista General


Vista Forums is an independent web site and has not been authorized,
sponsored, or otherwise approved by Microsoft Corporation.
"Windows Vista", the Start Orb, and related materials are trademarks of Microsoft Corp.
© Designer Media Ltd

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46