Windows Vista Forums
Vista Forums Home Join Vista Forums Windows 7 Forum Vista Tutorials Tags
Welcome to Windows Vista Forums. Our forum is dedicated to helping you find solutions with any problems, errors or issues you are experiencing with Windows Vista. The Vista forum also covers news and updates and has an extensive Windows Vista tutorial section that covers a wide range of tips and tricks.

Go Back   Vista Forums > Vista Newsgroups > Vista hardware & devices

Vista - How to turn off Speedstep?

Reply
 
Old 05-23-2007   #1 (permalink)
akita


 
 

How to turn off Speedstep?

Is there any way in Vista (32 bit) to turn off Intel’s Speedstep throttling?

Having spend a couple of hours going through Vista’s various and numerous
options (power options and so on) as well as spending some time researching
this on the net, I simply cannot find a way to turn speedstep off via the GUI.

My BIOS gives me two options: “Off” which sure enough turns speedstep off,
but sets the processors to run at minimum speed (1GHz), or “Enabled” which,
well, enables speedstep.

This used to be so easy in XP to turn off that I wonder why in Billy The
Gates’ name it seems an impossibility under Vista. The mind boggles … or am I
missing something here?

All advice & help would be much appreciated.

Relevant system info: Dell Precision M90, latest BIOS & drivers, Core2Duo
T7400


My System SpecsSystem Spec
Old 05-23-2007   #2 (permalink)
freddy


 
 

RE: How to turn off Speedstep?

akita,

I don't know whether the following comments are helpful to you, but I found
it on another forum and thought I'd pass it on:

Use Vista's throttling. I had to live without Speedswitch when I switched to
Vista (I'm back on XP now) simply because of the incompatibility that
everyone here has. NHC bluescreens and CrystalCPUID doesn't work at all.

Use the advanced power schemes in vista and run the CPU throttling at 50%
(it'll clock itself down to the speedstep value, not the throttling). The the
dumbest trick of all to get the throttling working (took me a week to figure
this out ) put your computer into standby, and bring it back out, and your
processor is now throttled. Changing the throttling in the power management
can now change the speed on-the-fly too. However it can clock itself up to
the full speed of the processor, speedstep on or not.

From what I saw in the Internet, this speedstep is difficult or impossible
to turn off. I'll look around some more. I've nothing better to do. A
vendor is selling a utility called SpeedswitchXP, for managing the speedstep
thing, but apparently no Vista version is yet available, if it ever will be.
--
freddy


"akita" wrote:

> Is there any way in Vista (32 bit) to turn off Intel’s Speedstep throttling?
>
> Having spend a couple of hours going through Vista’s various and numerous
> options (power options and so on) as well as spending some time researching
> this on the net, I simply cannot find a way to turn speedstep off via the GUI.
>
> My BIOS gives me two options: “Off” which sure enough turns speedstep off,
> but sets the processors to run at minimum speed (1GHz), or “Enabled” which,
> well, enables speedstep.
>
> This used to be so easy in XP to turn off that I wonder why in Billy The
> Gates’ name it seems an impossibility under Vista. The mind boggles … or am I
> missing something here?
>
> All advice & help would be much appreciated.
>
> Relevant system info: Dell Precision M90, latest BIOS & drivers, Core2Duo
> T7400
>

My System SpecsSystem Spec
Old 05-23-2007   #3 (permalink)
freddy


 
 

RE: How to turn off Speedstep?

akita,

I found the following comment made in response to a question similar to yours:

you should switch your Vista's power plan to this one: You'll also need to
go into advanced power plan settings and make sure that both "min" and "max"
CPU states are set to 100%.

I've concluded that manufactures of computers have made if hard to turn off
speedstep so that users are forced to conserve power, thus also conserving
battery life on laptops. Is any of this useful?
--
freddy


"akita" wrote:

> Is there any way in Vista (32 bit) to turn off Intel’s Speedstep throttling?
>
> Having spend a couple of hours going through Vista’s various and numerous
> options (power options and so on) as well as spending some time researching
> this on the net, I simply cannot find a way to turn speedstep off via the GUI.
>
> My BIOS gives me two options: “Off” which sure enough turns speedstep off,
> but sets the processors to run at minimum speed (1GHz), or “Enabled” which,
> well, enables speedstep.
>
> This used to be so easy in XP to turn off that I wonder why in Billy The
> Gates’ name it seems an impossibility under Vista. The mind boggles … or am I
> missing something here?
>
> All advice & help would be much appreciated.
>
> Relevant system info: Dell Precision M90, latest BIOS & drivers, Core2Duo
> T7400
>

My System SpecsSystem Spec
Reply

Thread Tools


Similar Threads
Thread Forum
*SpeedStep Guide:* Overclocking & Cooling
How to turn off Speedstep? Vista General
Speedstep Vista hardware & devices
Speedstep Vista hardware & devices
Pentium M & SpeedStep Vista hardware & devices


Vista Forums is an independent web site and has not been authorized,
sponsored, or otherwise approved by Microsoft Corporation.
"Windows Vista", the Start Orb, and related materials are trademarks of Microsoft Corp.
Designer Media Ltd

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46