Windows Vista Forums

BSOD while waking from hibernation

  1. #1


    4fingers Guest

    BSOD while waking from hibernation

    http://support.microsoft.com/kb/315266/en-us

    I have recently been having problems when trying to waken from hibernation
    mode. I seem to be able to do it fine the first time but when I the computer
    wakes from it the second time it simple gives a BSOD giving this technical
    information

    KERNEL_STACK_INPAGE_ERROR
    STOP 0x00000077 (0000000E 0x0000000E 0x00000000 0x19E81000)

    I tried Microsoft support
    http://support.microsoft.com/kb/315266/en-us
    But that didn't help much

    It made a crash dump file so I used WinDb to try and analyse it and this is
    what I got

    Microsoft (R) Windows Debugger Version 6.7.0005.0
    Copyright (c) Microsoft Corporation. All rights reserved.


    Loading Dump File [C:\Users\Graeme\Desktop\MEMORY.DMP]
    Kernel Complete Dump File: Full address space is available

    Symbol search path is:
    SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
    Executable search path is:
    Windows Vista Kernel Version 6000 UP Free x86 compatible
    Product: WinNt, suite: TerminalServer SingleUserTS
    Built by: 6000.16386.x86fre.vista_rtm.061101-2205
    Kernel base = 0x81c00000 PsLoadedModuleList = 0x81d11db0
    Debug session time: Sat Jun 2 14:03:49.781 2007 (GMT+1)
    System Uptime: 0 days 11:57:32.732
    Loading Kernel Symbols
    ............................................................................................................................................................
    Loading User Symbols

    Loading unloaded module list
    ...............
    *******************************************************************************
    *
    *
    * Bugcheck Analysis
    *
    *
    *
    *******************************************************************************

    Use !analyze -v to get detailed debugging information.

    BugCheck 77, {c000000e, c000000e, 0, 19e81000}

    Probably caused by : memory_corruption ( nt!MiMakeOutswappedPageResident+471 )

    Followup: MachineOwner
    ---------

    kd> !analyze -v
    *******************************************************************************
    *
    *
    * Bugcheck Analysis
    *
    *
    *
    *******************************************************************************

    KERNEL_STACK_INPAGE_ERROR (77)
    The requested page of kernel data could not be read in. Caused by
    bad block in paging file or disk controller error.
    In the case when the first arguments is 0 or 1, the stack signature
    in the kernel stack was not found. Again, bad hardware.
    An I/O status of c000009c (STATUS_DEVICE_DATA_ERROR) or
    C000016AL (STATUS_DISK_OPERATION_FAILED) normally indicates
    the data could not be read from the disk due to a bad
    block. Upon reboot autocheck will run and attempt to map out the bad
    sector. If the status is C0000185 (STATUS_IO_DEVICE_ERROR) and the paging
    file is on a SCSI disk device, then the cabling and termination should be
    checked. See the knowledge base article on SCSI termination.
    Arguments:
    Arg1: c000000e, status code
    Arg2: c000000e, i/o status code
    Arg3: 00000000, page file number
    Arg4: 19e81000, offset into page file

    Debugging Details:
    ------------------


    ERROR_CODE: (NTSTATUS) 0xc000000e - A device which does not exist was
    specified.

    DISK_HARDWARE_ERROR: There was error with disk hardware

    BUGCHECK_STR: 0x77_c000000e

    DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

    PROCESS_NAME: System

    CURRENT_IRQL: 0

    LAST_CONTROL_TRANSFER: from 81ccc677 to 81cd85c9

    STACK_TEXT:
    835cbc2c 81ccc677 00000077 c000000e c000000e nt!KeBugCheckEx+0x1e
    835cbcb0 81cccacc c041aeb8 0000bd6d 00000001
    nt!MiMakeOutswappedPageResident+0x471
    835cbd38 81cccba2 84181438 835cbd58 00000000
    nt!MiInPageSingleKernelStack+0x208
    835cbd6c 81cb3957 841814a8 00000000 835cbdc0 nt!KiInSwapKernelStacks+0x43
    835cbd7c 81e254a8 00000000 835c0680 00000000 nt!KeSwapProcessOrStack+0x83
    835cbdc0 81c9145e 81cb38d4 00000000 00000000 nt!PspSystemThreadStartup+0x9d
    00000000 00000000 00000000 00000000 00000000 nt!KiThreadStartup+0x16


    STACK_COMMAND: kb

    FOLLOWUP_IP:
    nt!MiMakeOutswappedPageResident+471
    81ccc677 cc int 3

    SYMBOL_STACK_INDEX: 1

    FOLLOWUP_NAME: MachineOwner

    MODULE_NAME: nt

    DEBUG_FLR_IMAGE_TIMESTAMP: 4549ae00

    SYMBOL_NAME: nt!MiMakeOutswappedPageResident+471

    IMAGE_NAME: memory_corruption

    FAILURE_BUCKET_ID: 0x77_c000000e_nt!MiMakeOutswappedPageResident+471

    BUCKET_ID: 0x77_c000000e_nt!MiMakeOutswappedPageResident+471

    Followup: MachineOwner
    ---------

    I am running on windows Vista Business 32 Bit edition. If you need more
    information just ask otherwise does anyone have any idea what could be
    causing it to do this.

    Thanks in Advance


      My System SpecsSystem Spec

  2. #2


    freddy Guest

    RE: BSOD while waking from hibernation

    4fingers,

    My reading makes me believe you have a bad hard drive, or at least bad
    portions on the hard drive.
    --
    freddy


    "4fingers" wrote:

    > http://support.microsoft.com/kb/315266/en-us
    >
    > I have recently been having problems when trying to waken from hibernation
    > mode. I seem to be able to do it fine the first time but when I the computer
    > wakes from it the second time it simple gives a BSOD giving this technical
    > information
    >
    > KERNEL_STACK_INPAGE_ERROR
    > STOP 0x00000077 (0000000E 0x0000000E 0x00000000 0x19E81000)
    >
    > I tried Microsoft support
    > http://support.microsoft.com/kb/315266/en-us
    > But that didn't help much
    >
    > It made a crash dump file so I used WinDb to try and analyse it and this is
    > what I got
    >
    > Microsoft (R) Windows Debugger Version 6.7.0005.0
    > Copyright (c) Microsoft Corporation. All rights reserved.
    >
    >
    > Loading Dump File [C:\Users\Graeme\Desktop\MEMORY.DMP]
    > Kernel Complete Dump File: Full address space is available
    >
    > Symbol search path is:
    > SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
    > Executable search path is:
    > Windows Vista Kernel Version 6000 UP Free x86 compatible
    > Product: WinNt, suite: TerminalServer SingleUserTS
    > Built by: 6000.16386.x86fre.vista_rtm.061101-2205
    > Kernel base = 0x81c00000 PsLoadedModuleList = 0x81d11db0
    > Debug session time: Sat Jun 2 14:03:49.781 2007 (GMT+1)
    > System Uptime: 0 days 11:57:32.732
    > Loading Kernel Symbols
    > ...........................................................................................................................................................
    > Loading User Symbols
    >
    > Loading unloaded module list
    > ..............
    > *******************************************************************************
    > *
    > *
    > * Bugcheck Analysis
    > *
    > *
    > *
    > *******************************************************************************
    >
    > Use !analyze -v to get detailed debugging information.
    >
    > BugCheck 77, {c000000e, c000000e, 0, 19e81000}
    >
    > Probably caused by : memory_corruption ( nt!MiMakeOutswappedPageResident+471 )
    >
    > Followup: MachineOwner
    > ---------
    >
    > kd> !analyze -v
    > *******************************************************************************
    > *
    > *
    > * Bugcheck Analysis
    > *
    > *
    > *
    > *******************************************************************************
    >
    > KERNEL_STACK_INPAGE_ERROR (77)
    > The requested page of kernel data could not be read in. Caused by
    > bad block in paging file or disk controller error.
    > In the case when the first arguments is 0 or 1, the stack signature
    > in the kernel stack was not found. Again, bad hardware.
    > An I/O status of c000009c (STATUS_DEVICE_DATA_ERROR) or
    > C000016AL (STATUS_DISK_OPERATION_FAILED) normally indicates
    > the data could not be read from the disk due to a bad
    > block. Upon reboot autocheck will run and attempt to map out the bad
    > sector. If the status is C0000185 (STATUS_IO_DEVICE_ERROR) and the paging
    > file is on a SCSI disk device, then the cabling and termination should be
    > checked. See the knowledge base article on SCSI termination.
    > Arguments:
    > Arg1: c000000e, status code
    > Arg2: c000000e, i/o status code
    > Arg3: 00000000, page file number
    > Arg4: 19e81000, offset into page file
    >
    > Debugging Details:
    > ------------------
    >
    >
    > ERROR_CODE: (NTSTATUS) 0xc000000e - A device which does not exist was
    > specified.
    >
    > DISK_HARDWARE_ERROR: There was error with disk hardware
    >
    > BUGCHECK_STR: 0x77_c000000e
    >
    > DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
    >
    > PROCESS_NAME: System
    >
    > CURRENT_IRQL: 0
    >
    > LAST_CONTROL_TRANSFER: from 81ccc677 to 81cd85c9
    >
    > STACK_TEXT:
    > 835cbc2c 81ccc677 00000077 c000000e c000000e nt!KeBugCheckEx+0x1e
    > 835cbcb0 81cccacc c041aeb8 0000bd6d 00000001
    > nt!MiMakeOutswappedPageResident+0x471
    > 835cbd38 81cccba2 84181438 835cbd58 00000000
    > nt!MiInPageSingleKernelStack+0x208
    > 835cbd6c 81cb3957 841814a8 00000000 835cbdc0 nt!KiInSwapKernelStacks+0x43
    > 835cbd7c 81e254a8 00000000 835c0680 00000000 nt!KeSwapProcessOrStack+0x83
    > 835cbdc0 81c9145e 81cb38d4 00000000 00000000 nt!PspSystemThreadStartup+0x9d
    > 00000000 00000000 00000000 00000000 00000000 nt!KiThreadStartup+0x16
    >
    >
    > STACK_COMMAND: kb
    >
    > FOLLOWUP_IP:
    > nt!MiMakeOutswappedPageResident+471
    > 81ccc677 cc int 3
    >
    > SYMBOL_STACK_INDEX: 1
    >
    > FOLLOWUP_NAME: MachineOwner
    >
    > MODULE_NAME: nt
    >
    > DEBUG_FLR_IMAGE_TIMESTAMP: 4549ae00
    >
    > SYMBOL_NAME: nt!MiMakeOutswappedPageResident+471
    >
    > IMAGE_NAME: memory_corruption
    >
    > FAILURE_BUCKET_ID: 0x77_c000000e_nt!MiMakeOutswappedPageResident+471
    >
    > BUCKET_ID: 0x77_c000000e_nt!MiMakeOutswappedPageResident+471
    >
    > Followup: MachineOwner
    > ---------
    >
    > I am running on windows Vista Business 32 Bit edition. If you need more
    > information just ask otherwise does anyone have any idea what could be
    > causing it to do this.
    >
    > Thanks in Advance
    >


      My System SpecsSystem Spec

  3. #3


    4fingers Guest

    RE: BSOD while waking from hibernation

    Hi freddy
    Well I did a Disk check and no errors were found and I see no other reason
    to suspect my hard drive is bad.
    Also if that were the case why would it work fine the first time and not the
    second?

    "freddy" wrote:

    > 4fingers,
    >
    > My reading makes me believe you have a bad hard drive, or at least bad
    > portions on the hard drive.
    > --
    > freddy
    >


      My System SpecsSystem Spec

  4. #4


    freddy Guest

    RE: BSOD while waking from hibernation

    4fingers,

    The problem with the error interpretation is that there are too many, to wit:

    1. Memory corruption
    2. Bad block in paging file
    3. Bad hardware (SCSI device)
    4. Device specified not found

    That's only after a quick reading. There may be others lurking within all
    that verbiage. This multitude of possibilities is difficult to deal with,
    and I can see why your asking. To get to the bottom of this takes someone
    with more technical knowledge than that which I possess.

    Suggestions: You ideas are just as good as mine. Take more reads of all
    those error statements, one at a time, and try using google to search for
    ideas. This approach likely could be time consuming, but there is likely no
    magic pixie dust available to solve this situation. Just some thoughts.
    It's unlikely any one else can determine the exact problem here, but--anyone?

    --
    freddy


    "4fingers" wrote:

    > Hi freddy
    > Well I did a Disk check and no errors were found and I see no other reason
    > to suspect my hard drive is bad.
    > Also if that were the case why would it work fine the first time and not the
    > second?
    >
    > "freddy" wrote:
    >
    > > 4fingers,
    > >
    > > My reading makes me believe you have a bad hard drive, or at least bad
    > > portions on the hard drive.
    > > --
    > > freddy
    > >


      My System SpecsSystem Spec

  5. #5


    freddy Guest

    RE: BSOD while waking from hibernation

    4fingers,

    One other possible approach that I didn't mention is to google on the words
    you used in your subject line, that is:

    troubleshooting BSOD while waking from hibernation

    Or words to that effect. You can sometimes get different results by
    changing the search terms even slightly.

    I've learned that something over here can cause something over there to
    crash. The system will then report that something over there crashed, giving
    you error codes that makes one think that the problem is that thing over
    there. But the problem is actually the thing over here. Now you're chasing
    your tail.

    I've seen video card functions crash because of a bad (incompatible) driver
    in something like the NIC card. The NIC driver causes the video card
    function to crash giving you an error code that says, if effect, "hey, your
    video card crashed." Now people start chasing after updated video card
    drivers, swapping out the video card, replacing the PSU, etc., etc., all of
    which don't work. You get the idea.

    Just some more things to consider. That's why searching on the above
    suggested search term might lead you in a different and more productive
    direction.
    --
    freddy


    "4fingers" wrote:

    > Hi freddy
    > Well I did a Disk check and no errors were found and I see no other reason
    > to suspect my hard drive is bad.
    > Also if that were the case why would it work fine the first time and not the
    > second?
    >
    > "freddy" wrote:
    >
    > > 4fingers,
    > >
    > > My reading makes me believe you have a bad hard drive, or at least bad
    > > portions on the hard drive.
    > > --
    > > freddy
    > >


      My System SpecsSystem Spec


BSOD while waking from hibernation
Similar Threads
Thread Forum
Windows Update waking up notebook from Hibernation Vista General
Won't ask for password when waking up from hibernation. Vista account administration
Solved Vista keeps waking out of hibernation General Discussion
CPU usage at 100% constantly after waking from hibernation/sleep Vista performance & maintenance
Computer waking up from hibernation Vista performance & maintenance