Windows Vista Forums
Vista Forums Home Join Vista Forums Windows 7 Forum Vista Tutorials Tags
Welcome to Windows Vista Forums. Our forum is dedicated to helping you find solutions with any problems, errors or issues you are experiencing with Windows Vista. The Vista forum also covers news and updates and has an extensive Windows Vista tutorial section that covers a wide range of tips and tricks.

Go Back   Vista Forums > Vista Newsgroups > Vista hardware & devices

Vista - PS2 scanner

Reply
 
Old 08-06-2007   #1 (permalink)
Jason


 
 

PS2 scanner

Hi there,

I have a PS2 barcode scanner which fits between the keyboard and PC (like a
daisy chain). I do not have PS2 port so I have used an adapter to adapt to
USB. I can not get the pc to recognize the scanner in system manager, it
just says unrecognized. I can get it to wok on a PS2 port on another PC. Is
this a USB power issue? Is there any way around this?

Any help is appreciated!

cheers

Jason


My System SpecsSystem Spec
Old 08-06-2007   #2 (permalink)
Rick Rogers


 
 

Re: PS2 scanner

Hi,

You need a proper supporting driver from the manufacturer of the scanning
device. You might also check whether the PS2/USB adapter is supported by it,
as not all devices are capable of this.

--
Best of Luck,

Rick Rogers, aka "Nutcase" - Microsoft MVP
http://mvp.support.microsoft.com/
Windows help - www.rickrogers.org
My thoughts http://rick-mvp.blogspot.com

"Jason" <jdhfch@hotmail.com> wrote in message
news:FCB7DF9B-E6C7-4D94-AB88-FB660914B88A@microsoft.com...
> Hi there,
>
> I have a PS2 barcode scanner which fits between the keyboard and PC (like
> a daisy chain). I do not have PS2 port so I have used an adapter to adapt
> to USB. I can not get the pc to recognize the scanner in system manager,
> it just says unrecognized. I can get it to wok on a PS2 port on another
> PC. Is this a USB power issue? Is there any way around this?
>
> Any help is appreciated!
>
> cheers
>
> Jason


My System SpecsSystem Spec
Old 08-07-2007   #3 (permalink)
ces.luscombe@gmail.com


 
 

Re: PS2 scanner

Owe are a barcode scanner distributor and come across this problem
often. It comes down to the usb/PS2 interface you are using. There are
two reasons it may not be working for you. they are.
1. The 5V coming from the ps2/usb interface may not be able to provide
the current required by the scanners. This is a common occurrence.
2. The ps2/usb interface may not be able to cope with the speed of the
keyboard transmissions from the scanner. You can try adding a time
delay between characters from the scanner (you need to use the manual
for the barcode reader to do this).

We have a special adaptor for AUD$50 we make up but we are from
Australia so that may not help you. The other option you may have is
to get the scanner converted to USB. How easy that is will depend on
the scanner. We sell usb barcode scanners from $130 so sometimes
conversion is not worth it.

Hope this helps you

Ces
Gripon Australia

My System SpecsSystem Spec
Reply

Thread Tools


Similar Threads
Thread Forum
ID scanner .NET General
Re: Does some one knows a good virus scanner that is just a scanner? Vista General
Re: Does some one knows a good virus scanner that is just a scanner? Vista General
Scanner is installed but Scanner Center says no scanner installed Vista print fax & scan
My scanner & RC1 Vista General


Vista Forums is an independent web site and has not been authorized,
sponsored, or otherwise approved by Microsoft Corporation.
"Windows Vista", the Start Orb, and related materials are trademarks of Microsoft Corp.
© Designer Media Ltd

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46