Vista Tutorial - Mikomi webcam driver

08-27-2007

Hi I have recently upgraded to Windows Vista and I am having problems with
installing my webcam which worked perfectly fine on XP! The webcam is a
Mikomi sn6217m. When it is attached to my new computer it searches for the
driver using windows update and I get the following message.
Windows found driver software but encountered error blah blah
Not enough storage for this operation.
Have looked on the internet and lots of other people are having the same
problem. Any ideas about what I can do? Don't really want to have to buy
another webcam.

08-27-2007

Have you been to the camera maker's website to look for
a vista driver? If found manually download and install it.

"somewhereinthefareast" <somewhereinthefareast@xxxxxx> wrote in message news:35CB1C12-869B-4BAD-8B75-B736835BAAE2@xxxxxx

Quote:

> Hi I have recently upgraded to Windows Vista and I am having problems with
> installing my webcam which worked perfectly fine on XP! The webcam is a
> Mikomi sn6217m. When it is attached to my new computer it searches for the
> driver using windows update and I get the following message.
> Windows found driver software but encountered error blah blah
> Not enough storage for this operation.
> Have looked on the internet and lots of other people are having the same
> problem. Any ideas about what I can do? Don't really want to have to buy
> another webcam.

08-27-2007

Yes have tried that one but Vista won't recognise the driver. I have tried
the mingjong website but too no avail. Many thanks for your suggestion. Any
other suggestions would be very much appreciated. Hopefully I don't have to
buy a new webcam.

"Spirit" wrote:

Quote:

> Have you been to the camera maker's website to look for
> a vista driver? If found manually download and install it.
>
> "somewhereinthefareast" <somewhereinthefareast@xxxxxx> wrote in message news:35CB1C12-869B-4BAD-8B75-B736835BAAE2@xxxxxx

Quote:

> > Hi I have recently upgraded to Windows Vista and I am having problems with
> > installing my webcam which worked perfectly fine on XP! The webcam is a
> > Mikomi sn6217m. When it is attached to my new computer it searches for the
> > driver using windows update and I get the following message.
> > Windows found driver software but encountered error blah blah
> > Not enough storage for this operation.
> > Have looked on the internet and lots of other people are having the same
> > problem. Any ideas about what I can do? Don't really want to have to buy
> > another webcam.

>

08-27-2007

Go into Device Manager and REMOVE the Camera,,, reboot
when it is found tell it to search the web for a new driver. Be
sure NOT to have any Camera dependent programs running
when doing this.

"somewhereinthefareast" <somewhereinthefareast@xxxxxx> wrote in message news:417D21CA-4CBF-4266-94B5-598C746A8DDD@xxxxxx

Quote:

> Yes have tried that one but Vista won't recognise the driver. I have tried
> the mingjong website but too no avail. Many thanks for your suggestion. Any
> other suggestions would be very much appreciated. Hopefully I don't have to
> buy a new webcam.
>
> "Spirit" wrote:
>

Quote:

>> Have you been to the camera maker's website to look for
>> a vista driver? If found manually download and install it.
>>
>> "somewhereinthefareast" <somewhereinthefareast@xxxxxx> wrote in message news:35CB1C12-869B-4BAD-8B75-B736835BAAE2@xxxxxx

Quote:

>> > Hi I have recently upgraded to Windows Vista and I am having problems with
>> > installing my webcam which worked perfectly fine on XP! The webcam is a
>> > Mikomi sn6217m. When it is attached to my new computer it searches for the
>> > driver using windows update and I get the following message.
>> > Windows found driver software but encountered error blah blah
>> > Not enough storage for this operation.
>> > Have looked on the internet and lots of other people are having the same
>> > problem. Any ideas about what I can do? Don't really want to have to buy
>> > another webcam.

>>

08-28-2007

I have the exact same problem with another webcam (GE) and a smartcard
reader. Although I'm administrator of my machine, it acts like I have no
access to somewhere. Curiously, this webcam has a mic built in that's working
fine.

Now we are two looking for help :-)

FYI: I tried using Install Clean Up tool but didn't work.

"Spirit" wrote:

Quote:

> Go into Device Manager and REMOVE the Camera,,, reboot
> when it is found tell it to search the web for a new driver. Be
> sure NOT to have any Camera dependent programs running
> when doing this.
>
> "somewhereinthefareast" <somewhereinthefareast@xxxxxx> wrote in message news:417D21CA-4CBF-4266-94B5-598C746A8DDD@xxxxxx

Quote:

> > Yes have tried that one but Vista won't recognise the driver. I have tried
> > the mingjong website but too no avail. Many thanks for your suggestion. Any
> > other suggestions would be very much appreciated. Hopefully I don't have to
> > buy a new webcam.
> >
> > "Spirit" wrote:
> >

Quote:

> >> Have you been to the camera maker's website to look for
> >> a vista driver? If found manually download and install it.
> >>
> >> "somewhereinthefareast" <somewhereinthefareast@xxxxxx> wrote in message news:35CB1C12-869B-4BAD-8B75-B736835BAAE2@xxxxxx
> >> > Hi I have recently upgraded to Windows Vista and I am having problems with
> >> > installing my webcam which worked perfectly fine on XP! The webcam is a
> >> > Mikomi sn6217m. When it is attached to my new computer it searches for the
> >> > driver using windows update and I get the following message.
> >> > Windows found driver software but encountered error blah blah
> >> > Not enough storage for this operation.
> >> > Have looked on the internet and lots of other people are having the same
> >> > problem. Any ideas about what I can do? Don't really want to have to buy
> >> > another webcam.
> >>

>

08-29-2007

I tried this method but to no avail. Computer showed that the camera didn't
even exist. Software is loaded on to the system but Vista won't register the
camera driver.

"Spirit" wrote:

Quote:

> Go into Device Manager and REMOVE the Camera,,, reboot
> when it is found tell it to search the web for a new driver. Be
> sure NOT to have any Camera dependent programs running
> when doing this.
>
> "somewhereinthefareast" <somewhereinthefareast@xxxxxx> wrote in message news:417D21CA-4CBF-4266-94B5-598C746A8DDD@xxxxxx

Quote:

> > Yes have tried that one but Vista won't recognise the driver. I have tried
> > the mingjong website but too no avail. Many thanks for your suggestion. Any
> > other suggestions would be very much appreciated. Hopefully I don't have to
> > buy a new webcam.
> >
> > "Spirit" wrote:
> >

Quote:

> >> Have you been to the camera maker's website to look for
> >> a vista driver? If found manually download and install it.
> >>
> >> "somewhereinthefareast" <somewhereinthefareast@xxxxxx> wrote in message news:35CB1C12-869B-4BAD-8B75-B736835BAAE2@xxxxxx
> >> > Hi I have recently upgraded to Windows Vista and I am having problems with
> >> > installing my webcam which worked perfectly fine on XP! The webcam is a
> >> > Mikomi sn6217m. When it is attached to my new computer it searches for the
> >> > driver using windows update and I get the following message.
> >> > Windows found driver software but encountered error blah blah
> >> > Not enough storage for this operation.
> >> > Have looked on the internet and lots of other people are having the same
> >> > problem. Any ideas about what I can do? Don't really want to have to buy
> >> > another webcam.
> >>

>

09-05-2007

"somewhereinthefareast" <somewhereinthefareast@xxxxxx>
wrote in message news:417D21CA-4CBF-4266-94B5-598C746A8DDD@xxxxxx

Quote:

> Yes have tried that one but Vista won't recognise the driver. I have tried
> the mingjong website but too no avail. Many thanks for your suggestion.
> Any
> other suggestions would be very much appreciated. Hopefully I don't have
> to
> buy a new webcam.
>
> "Spirit" wrote:
>

Quote:

>> Have you been to the camera maker's website to look for
>> a vista driver? If found manually download and install it.
>>

If there website lists it as a Vista compatible driver and it still won't
install, have you checked with Mikomi tech support about this issue, have
you checked any support or troubleshooting documentation they might have at
the website?

--
Michael Solomon
Backup is a PC user's best friend
DTS-L.Org: http://www.dts-l.org/

08-27-2007	#1 (permalink)
somewhereinthefareast Guest n/a posts	Mikomi webcam driver Hi I have recently upgraded to Windows Vista and I am having problems with installing my webcam which worked perfectly fine on XP! The webcam is a Mikomi sn6217m. When it is attached to my new computer it searches for the driver using windows update and I get the following message. Windows found driver software but encountered error blah blah Not enough storage for this operation. Have looked on the internet and lots of other people are having the same problem. Any ideas about what I can do? Don't really want to have to buy another webcam.
My System Specs

08-27-2007	#2 (permalink)
Spirit Guest n/a posts	Re: Mikomi webcam driver Have you been to the camera maker's website to look for a vista driver? If found manually download and install it. "somewhereinthefareast" <somewhereinthefareast@xxxxxx> wrote in message news:35CB1C12-869B-4BAD-8B75-B736835BAAE2@xxxxxx Quote: > Hi I have recently upgraded to Windows Vista and I am having problems with > installing my webcam which worked perfectly fine on XP! The webcam is a > Mikomi sn6217m. When it is attached to my new computer it searches for the > driver using windows update and I get the following message. > Windows found driver software but encountered error blah blah > Not enough storage for this operation. > Have looked on the internet and lots of other people are having the same > problem. Any ideas about what I can do? Don't really want to have to buy > another webcam.
My System Specs

08-27-2007	#3 (permalink)
somewhereinthefareast Guest n/a posts	Re: Mikomi webcam driver Yes have tried that one but Vista won't recognise the driver. I have tried the mingjong website but too no avail. Many thanks for your suggestion. Any other suggestions would be very much appreciated. Hopefully I don't have to buy a new webcam. "Spirit" wrote: Quote: > Have you been to the camera maker's website to look for > a vista driver? If found manually download and install it. > > "somewhereinthefareast" <somewhereinthefareast@xxxxxx> wrote in message news:35CB1C12-869B-4BAD-8B75-B736835BAAE2@xxxxxx Quote: > > Hi I have recently upgraded to Windows Vista and I am having problems with > > installing my webcam which worked perfectly fine on XP! The webcam is a > > Mikomi sn6217m. When it is attached to my new computer it searches for the > > driver using windows update and I get the following message. > > Windows found driver software but encountered error blah blah > > Not enough storage for this operation. > > Have looked on the internet and lots of other people are having the same > > problem. Any ideas about what I can do? Don't really want to have to buy > > another webcam. >
My System Specs

08-27-2007	#4 (permalink)
Spirit Guest n/a posts	Re: Mikomi webcam driver Go into Device Manager and REMOVE the Camera,,, reboot when it is found tell it to search the web for a new driver. Be sure NOT to have any Camera dependent programs running when doing this. "somewhereinthefareast" <somewhereinthefareast@xxxxxx> wrote in message news:417D21CA-4CBF-4266-94B5-598C746A8DDD@xxxxxx Quote: > Yes have tried that one but Vista won't recognise the driver. I have tried > the mingjong website but too no avail. Many thanks for your suggestion. Any > other suggestions would be very much appreciated. Hopefully I don't have to > buy a new webcam. > > "Spirit" wrote: > Quote: >> Have you been to the camera maker's website to look for >> a vista driver? If found manually download and install it. >> >> "somewhereinthefareast" <somewhereinthefareast@xxxxxx> wrote in message news:35CB1C12-869B-4BAD-8B75-B736835BAAE2@xxxxxx Quote: >> > Hi I have recently upgraded to Windows Vista and I am having problems with >> > installing my webcam which worked perfectly fine on XP! The webcam is a >> > Mikomi sn6217m. When it is attached to my new computer it searches for the >> > driver using windows update and I get the following message. >> > Windows found driver software but encountered error blah blah >> > Not enough storage for this operation. >> > Have looked on the internet and lots of other people are having the same >> > problem. Any ideas about what I can do? Don't really want to have to buy >> > another webcam. >>
My System Specs

08-28-2007	#5 (permalink)
Daniel Guest n/a posts	Re: Mikomi webcam driver I have the exact same problem with another webcam (GE) and a smartcard reader. Although I'm administrator of my machine, it acts like I have no access to somewhere. Curiously, this webcam has a mic built in that's working fine. Now we are two looking for help :-) FYI: I tried using Install Clean Up tool but didn't work. "Spirit" wrote: Quote: > Go into Device Manager and REMOVE the Camera,,, reboot > when it is found tell it to search the web for a new driver. Be > sure NOT to have any Camera dependent programs running > when doing this. > > "somewhereinthefareast" <somewhereinthefareast@xxxxxx> wrote in message news:417D21CA-4CBF-4266-94B5-598C746A8DDD@xxxxxx Quote: > > Yes have tried that one but Vista won't recognise the driver. I have tried > > the mingjong website but too no avail. Many thanks for your suggestion. Any > > other suggestions would be very much appreciated. Hopefully I don't have to > > buy a new webcam. > > > > "Spirit" wrote: > > Quote: > >> Have you been to the camera maker's website to look for > >> a vista driver? If found manually download and install it. > >> > >> "somewhereinthefareast" <somewhereinthefareast@xxxxxx> wrote in message news:35CB1C12-869B-4BAD-8B75-B736835BAAE2@xxxxxx > >> > Hi I have recently upgraded to Windows Vista and I am having problems with > >> > installing my webcam which worked perfectly fine on XP! The webcam is a > >> > Mikomi sn6217m. When it is attached to my new computer it searches for the > >> > driver using windows update and I get the following message. > >> > Windows found driver software but encountered error blah blah > >> > Not enough storage for this operation. > >> > Have looked on the internet and lots of other people are having the same > >> > problem. Any ideas about what I can do? Don't really want to have to buy > >> > another webcam. > >> >
My System Specs

08-29-2007	#6 (permalink)
somewhereinthefareast Guest n/a posts	Re: Mikomi webcam driver I tried this method but to no avail. Computer showed that the camera didn't even exist. Software is loaded on to the system but Vista won't register the camera driver. "Spirit" wrote: Quote: > Go into Device Manager and REMOVE the Camera,,, reboot > when it is found tell it to search the web for a new driver. Be > sure NOT to have any Camera dependent programs running > when doing this. > > "somewhereinthefareast" <somewhereinthefareast@xxxxxx> wrote in message news:417D21CA-4CBF-4266-94B5-598C746A8DDD@xxxxxx Quote: > > Yes have tried that one but Vista won't recognise the driver. I have tried > > the mingjong website but too no avail. Many thanks for your suggestion. Any > > other suggestions would be very much appreciated. Hopefully I don't have to > > buy a new webcam. > > > > "Spirit" wrote: > > Quote: > >> Have you been to the camera maker's website to look for > >> a vista driver? If found manually download and install it. > >> > >> "somewhereinthefareast" <somewhereinthefareast@xxxxxx> wrote in message news:35CB1C12-869B-4BAD-8B75-B736835BAAE2@xxxxxx > >> > Hi I have recently upgraded to Windows Vista and I am having problems with > >> > installing my webcam which worked perfectly fine on XP! The webcam is a > >> > Mikomi sn6217m. When it is attached to my new computer it searches for the > >> > driver using windows update and I get the following message. > >> > Windows found driver software but encountered error blah blah > >> > Not enough storage for this operation. > >> > Have looked on the internet and lots of other people are having the same > >> > problem. Any ideas about what I can do? Don't really want to have to buy > >> > another webcam. > >> >
My System Specs

09-05-2007	#7 (permalink)
Michael Solomon Guest n/a posts	Re: Mikomi webcam driver "somewhereinthefareast" <somewhereinthefareast@xxxxxx> wrote in message news:417D21CA-4CBF-4266-94B5-598C746A8DDD@xxxxxx Quote: > Yes have tried that one but Vista won't recognise the driver. I have tried > the mingjong website but too no avail. Many thanks for your suggestion. > Any > other suggestions would be very much appreciated. Hopefully I don't have > to > buy a new webcam. > > "Spirit" wrote: > Quote: >> Have you been to the camera maker's website to look for >> a vista driver? If found manually download and install it. >> If there website lists it as a Vista compatible driver and it still won't install, have you checked with Mikomi tech support about this issue, have you checked any support or troubleshooting documentation they might have at the website? -- Michael Solomon Backup is a PC user's best friend DTS-L.Org: http://www.dts-l.org/
My System Specs

Similar Threads
Thread	Forum
Need help with webcam driver	Drivers
Driver Issues-Webcam	Drivers
Webcam Driver (or something of the sort)	Drivers
Webcam Driver Error	Drivers
Webcam driver	Vista hardware & devices