![]() |
![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() |
| Welcome to Windows Vista Forums. Our forum is dedicated to helping you find solutions with any problems, errors or issues you are experiencing with Windows Vista. The Vista forum also covers news and updates and has an extensive Windows Vista tutorial section that covers a wide range of tips and tricks. |
| |||||||
![]() |
| |
| | #1 (permalink) |
| | Vista BSOD nvlddmkm.sys on boot System: Windows Vista Ultimate fully updated, Intel E6600, Nvidia 7600GT, 4Gb Ram, one LCD VGA and one lcd via DVI etc, nothing is over clocked Problem: I built this system 6 months ago and it has been running perfectly since. On August 27th my system tried to automatically update the existing Nvidia driver from Windows Update (groan, I know, I’ve changed it and will never let this happen again). My previous driver had been working perfectly. I was at work and came home, my system was unstable, I was getting TDR’s, artefacts on screen and before I could really work out what was going on my system crashed with BSOD on nvlddmkm.sys error 116. Now it is in a loop. No matter what I do or what display drivers I try Vista always crashes on reboot with the same BSOD nvlddmkm.sys error 116. With an Nvidia driver loaded I get a BSOD nvlddmkm.sys at boot with error 116. Regardless of driver – 97.46, 100.64, 162.22, 162.44 etc If I let my system update itself, ie with a Microsoft minimal driver, it boots but all I get displayed is a blank black screen with a mouse cursor. Microsoft Nvidia WDDM driver 25/01/2007 So it shows a mouse cursor that actaully moves about but the desktop is not present, blank, black etc. If I uninstall whatever driver is currently installed from safe mode, removing all driver files, removing those in system32 and renaming nvlddmkm.sys in system32/drivers, and then reboot, my system boots up with no driver file loaded for the adaptor at all. This actually allows me to boot into Vista and gives me a desktop but clearly this means I have no display driver running and have no more than basic display functionality. I really need help. My own view is Windows update partially installed a driver or partially updated the driver that was on my system prior to August 27th. Somehow it never completed that operation and my system has residual registry entries that point to incorrect driver files. I have tried sweeping registry and I did find residual NVidia files but they were minimal and when I installed driver again I had the same nvlddmkm.sts BSOD error. I have two monitors one a Sony 17” LCD VGA and an LG 22” DVI. They were both working fine prior but now they don’t, obviously. I have seen messages about dual displays and the drivers/registry becoming confused. So I tried various configurations of monitor - VGA only, DVI only, connected to different ports etc. Each time same error BSOD nvlddmkm.sys 116. It's now three weeks since this happened and my system is still farquhared. I need some serious help, I am way behind on some lucrative projects and I might pay for help to get this resolved. Help!!! |
My System Specs![]() |
| | #2 (permalink) |
| Vista x64 Ultimate | Re: Vista BSOD nvlddmkm.sys on boot |
My System Specs![]() |
| | #3 (permalink) |
| | Re: Vista BSOD nvlddmkm.sys on boot Well this is interesting. And I think this is definitely related to my problem. Whatever Windows Update downloaded and installed as a new Nvidia driver for my machine included the CAUSE of this error as the previous 6 months have been trouble free for me and since that download I have seen this error variously whenever I ventured to allow windows update try to install their suggested driver for my card. Now waiting for hotfix... Meanwhile my system is still farqhuared for about the 20th day.. Thank you. Fingers crossed... "geezer10" wrote: Quote: > > 'The screen may go blank when you try to upgrade the video driver on a > Windows Vista-based computer' (http://support.microsoft.com/kb/932539/) > > > -- > geezer10 > |
My System Specs![]() |
| | #4 (permalink) |
| | Re: Vista BSOD nvlddmkm.sys on boot I can confirm this is not a specific problem with Nvidia cards. I went out and bought a new ATI graphics card because I could not afford to wait any longer. I immediately installed this card and my system immediately sprang into life. And in the two hours it was working I managed to backup or otherwise retrieve all my data. The next I saw was a 'display driver stopped working' error in Vista, also know as a TDR error, where timing between Vista and graphics card is lost somehow. Basically this error appeared maybe 4 times then my system crashed again with the same error BSOD 116 but with the ATI driver file instaed of the nvidia driver. THIS IS A VISTA UPDATE problem where my system has been corrupted by a wayward Vista Update. SOmehow this is killing graphics systems... I hope they fix it soon.... Vista is becoming unusable "Smilerfive" wrote: Quote: > Well this is interesting. And I think this is definitely related to my > problem. Whatever Windows Update downloaded and installed as a new Nvidia > driver for my machine included the CAUSE of this error as the previous 6 > months have been trouble free for me and since that download I have seen this > error variously whenever I ventured to allow windows update try to install > their suggested driver for my card. > > Now waiting for hotfix... Meanwhile my system is still farqhuared for about > the 20th day.. > > Thank you. Fingers crossed... > > > "geezer10" wrote: > Quote: > > > > 'The screen may go blank when you try to upgrade the video driver on a > > Windows Vista-based computer' (http://support.microsoft.com/kb/932539/) > > > > > > -- > > geezer10 > > |
My System Specs![]() |
| | #5 (permalink) |
| Vista x64 Ultimate | Re: Vista BSOD nvlddmkm.sys on boot your video cards are not resetting - you might have a motherboard problem - i would reset the cmos with the jumper next to the battery - and update BIOS - also try with only 1 monitor - 2 monitors will push your graphics to the limit. This problem can sometimes be fixed by upgrading power supply or switching ram but as you were working before this is not likely, still driver updates can change the power requirements etc. good to hear you saved your data - now you can experiment a bit more - i would get drivers direct from video card sites - perhaps reduce your system to minimal state and if you get it working again set a restore point sorry i cannot be more help but let us know if you do find the cause - good luck! |
My System Specs![]() |
| | #6 (permalink) |
| | Re: Vista BSOD nvlddmkm.sys on boot Possibly a WinUpdate made a Vista change to fix a security problem which your current MOBO Bios does not support properly on your PCI bus. I suggest checking to be sure you have the latest BIOS. Since the problem does not occur constantly If could be related to a PS issue, an overheating problem or a memory problem. I suggest suggest running a memory diagnostic or switching your memory dims. "geezer10" <geezer10.2wrk15@xxxxxx-mx.forums.net> wrote in message news:geezer10.2wrk15@xxxxxx-mx.forums.net... Quote: > > your video cards are not resetting - you might have a motherboard > problem - i would reset the cmos with the jumper next to the battery - > and update BIOS - also try with only 1 monitor - 2 monitors will push > your graphics to the limit. > > This problem can sometimes be fixed by upgrading power supply or > switching ram but as you were working before this is not likely, still > driver updates can change the power requirements etc. > > good to hear you saved your data - now you can experiment a bit more - > i would get drivers direct from video card sites - perhaps reduce your > system to minimal state and if you get it working again set a restore > point > > sorry i cannot be more help but let us know if you do find the cause - > good luck! > > > -- > geezer10 |
My System Specs![]() |
| | #7 (permalink) |
| | Re: Vista BSOD nvlddmkm.sys on boot It is widely reported both on the internet and at nVidia's forums: http://forums.nvidia.com/ - just Google nvlddmkm.sys and see what you get. It's an intermittent problem that has been with us for a while. -- Peter Toronto, Canada "JW" <JW@xxxxxx> wrote in message news:5E929332-426B-4CC4-821A-F23C2608F476@xxxxxx Quote: > Possibly a WinUpdate made a Vista change to fix a security problem which > your current MOBO Bios does not support properly on your PCI bus. > I suggest checking to be sure you have the latest BIOS. > Since the problem does not occur constantly If could be related to a PS > issue, an overheating problem or a memory problem. > I suggest suggest running a memory diagnostic or switching your memory > dims. > > "geezer10" <geezer10.2wrk15@xxxxxx-mx.forums.net> wrote in message > news:geezer10.2wrk15@xxxxxx-mx.forums.net... Quote: >> >> your video cards are not resetting - you might have a motherboard >> problem - i would reset the cmos with the jumper next to the battery - >> and update BIOS - also try with only 1 monitor - 2 monitors will push >> your graphics to the limit. >> >> This problem can sometimes be fixed by upgrading power supply or >> switching ram but as you were working before this is not likely, still >> driver updates can change the power requirements etc. >> >> good to hear you saved your data - now you can experiment a bit more - >> i would get drivers direct from video card sites - perhaps reduce your >> system to minimal state and if you get it working again set a restore >> point >> >> sorry i cannot be more help but let us know if you do find the cause - >> good luck! >> >> >> -- >> geezer10 |
My System Specs![]() |
| | #8 (permalink) |
| | Re: Vista BSOD nvlddmkm.sys on boot I have the same problem with ATI and a X1600 AGP card. ATI is TOTALLY useless since AMD bought them! (Note to self, never buy ATI again) They have given me some of the most lame and ridiculous suggestions. My card also stopped working in August and I have spent hours working on it. First the ATI uninstall program is VERY sloppy. After a COMPLETE ATI uninstall there were still 650mb of ATI files on my hard drive! As I see it there is is a couple problems. First ATI is totally out of sync with Microsoft and will not admit it. They release drivers that are poorly written and sloppy re-installation and removal. The problem seems to affect AGP cards on slight older systems. I could be wrong but my computer with a PCIE card works fine. In August Microsoft "pushed" a download called SilverLight. My computer has never worked right since. Naturally to even ask MS the want 59 BUCKS. I have a funny feeling this Silver Light program may have changed the way vista supports AGP cards, seeing as the same program works fine with my computer with a PCIE card. This does NOT let ATI off the hook. It the want to be the leader of video cards then they MUST know about Silverlight and subsequently write fixes for their drivers! The problem may have been caused by SilverLight, but it is the ATI card that is not working. Does this sound familiar to anyone. Take a look and see if MS Silverlight is in your program install/install list. "Peter" wrote: Quote: > It is widely reported both on the INTERNET and at nVidia's forums: > http://forums.nvidia.com/ - just Goggle nvlddmkm.sys and see what you get. > It's an intermittent problem that has been with us for a while. > > -- > Peter > Toronto, Canada > "JW" <JW@xxxxxx> wrote in message > news:5E929332-426B-4CC4-821A-F23C2608F476@xxxxxx Quote: > > Possibly a WinUpdate made a Vista change to fix a security problem which > > your current MOBO Bios does not support properly on your PCI bus. > > I suggest checking to be sure you have the latest BIOS. > > Since the problem does not occur constantly If could be related to a PS > > issue, an overheating problem or a memory problem. > > I suggest suggest running a memory diagnostic or switching your memory > > dims. > > > > "geezer10" <geezer10.2wrk15@xxxxxx-mx.forums.net> wrote in message > > news:geezer10.2wrk15@xxxxxx-mx.forums.net... Quote: > >> > >> your video cards are not resetting - you might have a motherboard > >> problem - i would reset the cmos with the jumper next to the battery - > >> and update BIOS - also try with only 1 monitor - 2 monitors will push > >> your graphics to the limit. > >> > >> This problem can sometimes be fixed by upgrading power supply or > >> switching ram but as you were working before this is not likely, still > >> driver updates can change the power requirements etc. > >> > >> good to hear you saved your data - now you can experiment a bit more - > >> i would get drivers direct from video card sites - perhaps reduce your > >> system to minimal state and if you get it working again set a restore > >> point > >> > >> sorry i cannot be more help but let us know if you do find the cause - > >> good luck! > >> > >> > >> -- > >> geezer10 > |
My System Specs![]() |
| | #9 (permalink) |
| | Re: Vista BSOD nvlddmkm.sys on boot Does anyone have the hotfix KB932539 as MS will not release it even though they wrote it. They want you to pay the $59.00 to beg for it "Peter" wrote: Quote: > It is widely reported both on the internet and at nVidia's forums: > http://forums.nvidia.com/ - just Google nvlddmkm.sys and see what you get. > It's an intermittent problem that has been with us for a while. > > -- > Peter > Toronto, Canada > "JW" <JW@xxxxxx> wrote in message > news:5E929332-426B-4CC4-821A-F23C2608F476@xxxxxx Quote: > > Possibly a WinUpdate made a Vista change to fix a security problem which > > your current MOBO Bios does not support properly on your PCI bus. > > I suggest checking to be sure you have the latest BIOS. > > Since the problem does not occur constantly If could be related to a PS > > issue, an overheating problem or a memory problem. > > I suggest suggest running a memory diagnostic or switching your memory > > dims. > > > > "geezer10" <geezer10.2wrk15@xxxxxx-mx.forums.net> wrote in message > > news:geezer10.2wrk15@xxxxxx-mx.forums.net... Quote: > >> > >> your video cards are not resetting - you might have a motherboard > >> problem - i would reset the cmos with the jumper next to the battery - > >> and update BIOS - also try with only 1 monitor - 2 monitors will push > >> your graphics to the limit. > >> > >> This problem can sometimes be fixed by upgrading power supply or > >> switching ram but as you were working before this is not likely, still > >> driver updates can change the power requirements etc. > >> > >> good to hear you saved your data - now you can experiment a bit more - > >> i would get drivers direct from video card sites - perhaps reduce your > >> system to minimal state and if you get it working again set a restore > >> point > >> > >> sorry i cannot be more help but let us know if you do find the cause - > >> good luck! > >> > >> > >> -- > >> geezer10 > |
My System Specs![]() |
| | #10 (permalink) |
| | Re: Vista BSOD nvlddmkm.sys on boot Does anyone have the hotfix KB932539 as MS will not release it even though they wrote it. They want you to pay the $59.00 to beg for it "Peter" wrote: Quote: > It is widely reported both on the internet and at nVidia's forums: > http://forums.nvidia.com/ - just Google nvlddmkm.sys and see what you get. > It's an intermittent problem that has been with us for a while. > > -- > Peter > Toronto, Canada > "JW" <JW@xxxxxx> wrote in message > news:5E929332-426B-4CC4-821A-F23C2608F476@xxxxxx Quote: > > Possibly a WinUpdate made a Vista change to fix a security problem which > > your current MOBO Bios does not support properly on your PCI bus. > > I suggest checking to be sure you have the latest BIOS. > > Since the problem does not occur constantly If could be related to a PS > > issue, an overheating problem or a memory problem. > > I suggest suggest running a memory diagnostic or switching your memory > > dims. > > > > "geezer10" <geezer10.2wrk15@xxxxxx-mx.forums.net> wrote in message > > news:geezer10.2wrk15@xxxxxx-mx.forums.net... Quote: > >> > >> your video cards are not resetting - you might have a motherboard > >> problem - i would reset the cmos with the jumper next to the battery - > >> and update BIOS - also try with only 1 monitor - 2 monitors will push > >> your graphics to the limit. > >> > >> This problem can sometimes be fixed by upgrading power supply or > >> switching ram but as you were working before this is not likely, still > >> driver updates can change the power requirements etc. > >> > >> good to hear you saved your data - now you can experiment a bit more - > >> i would get drivers direct from video card sites - perhaps reduce your > >> system to minimal state and if you get it working again set a restore > >> point > >> > >> sorry i cannot be more help but let us know if you do find the cause - > >> good luck! > >> > >> > >> -- > >> geezer10 > |
My System Specs![]() |
![]() |
| Thread Tools | |
| |
Similar Threads | ||||
| Thread | Forum | |||
| Vista Update Nvidia Driver nvlddmkm.sys BSOD | Vista hardware & devices | |||
| Vista Nvidia nvlddmkm.sys BSOD Boot | Vista installation & setup | |||
| Vista boot BSOD nvlddmkm.sys Nvidia crash | Vista General | |||
| Vista Update Nvidia Driver nvlddmkm.sys BSOD | Vista performance & maintenance | |||
| Vista Update Nvidia Driver nvlddmkm.sys BSOD | Vista installation & setup | |||