Vista - Windows Vista/Media Player 11 wont recognize cd/dvd writer

hi i was trying to burn a cd a while ago and then i realized that media
player11 wont recognize my cd burner, so i cant burn anything.

i looked around and saw that if i right click on my cd drive and click on
properties, it should have a recording tab that can "enable burning" , but i
dont have that.

i am using a samsung sh-s182d cd/dvd writer and it wasnt listed as a
compatible device under the vista compatibility page.

is there anything that can be done to make it compatible?

specs:
vista home premium 64
nvidia 8800gtx
intel core2quad q6600
samsung sh-s182d

Try this:

http://support.microsoft.com/kb/316529/EN-US


I Bleed Blue and Gold
GO BEARS!


"deadringer" <deadringer@xxxxxx> wrote in message
news:B78C0167-5146-42E8-A47E-163F6FEE346C@xxxxxx

thanks but it didnt work but at the bottom it said this:

This procedure may not work in all cases. This is only a workaround in a
situation where the CD-R drive or CD-RW drive is capable of functioning in
Windows XP and for some reason has been misidentified. If the drive is not on
the Hardware Compatibility List (HCL), the drive may not work with the
built-in CD copying functionality, regardless of this registry setting.

i dont think my drive is in the hardware compatibility list so is there
anything else i can do?

"Cal Bear '66" wrote:

I had an old CD writer that would not work with Vista (it worked well with XP)
and this registry fix also did not work.

I downloaded and installed the latest firmware update from the drive
manufacturer and the drive now works great with Vista.

Have you gone to the drive manufacturer's site to see if they have a firmware
update?

If you do find an update, be sure to follow the installation instructions to the
letter.


I Bleed Blue and Gold
GO BEARS!


"deadringer" <deadringer@xxxxxx> wrote in message
news:70827D98-567B-45CD-B320-3903AB32FE16@xxxxxx

oh i see. well i went to samsung's website and they had a list of the
firmwares. i downloaded and installed the latest one and it didnt do
anything. so i tried emailing samsung but i still havent gotten a response
from them.

should i install all of the firmwares?

let me try to install the latest one again to make sure

thanks dude

"Cal Bear '66" wrote:

If the latest firmware update does not work, then probably your only option is
to replace the drive.

How old is the drive?

I definitely would NOT apply all the firmware updates. You could possibly make
the drive totally unusable.

Perhaps you could give it to someone who could make good use of it?


I Bleed Blue and Gold
GO BEARS!


"deadringer" <deadringer@xxxxxx> wrote in message
news:8085ED10-8E48-4727-A1BC-50CD31E693CA@xxxxxx

lol actually i cant install all of them at the same time, i think it
uninstalls the old one automatically. but i tried an older version and it
doesnt do anything either.

whats frustrating is that its only a couple of months old, i bought it with
this brand new system i built.

i guess there isnt a windows update that fixes this?

if not i guess i will have to wait for samsung support to respond to see
what they say. (i have emailed them 3 times already!! and no response)

so if i have to buy a new drive, do i just check the compatibility list to
see if the drive is compatible?

thanks for your help dude

"Cal Bear '66" wrote:

Yeah, if the drive is only a couple of months old it should work with Vista.

Have you tried UNINSTALLING the drive in Device Manager and rebooting to let
Windows re-detect it?

Is this a SATA or a PATA drive? Have you tried a different cable, a different
cable connector or a different motherboard port? And, of course, checked the
jumpers.


I Bleed Blue and Gold
GO BEARS!


"deadringer" <deadringer@xxxxxx> wrote in message
news:7C2E3F83-80AE-490C-BD94-D82CE0EEDA28@xxxxxx

well it worked when i had xp installed so i dont think the cables or anything
are faulty. but i will try to uninstall the drive or check out drivers for my
motherboard or something just in case.

thanks

"Cal Bear '66" wrote: