Windows Vista Forums
Vista Forums Home Join Vista Forums Windows 7 Forum Vista Tutorials Tags
Welcome to Windows Vista Forums. Our forum is dedicated to helping you find solutions with any problems, errors or issues you are experiencing with Windows Vista. The Vista forum also covers news and updates and has an extensive Windows Vista tutorial section that covers a wide range of tips and tricks.

Go Back   Vista Forums > Vista Newsgroups > Vista installation & setup

Vista - Vista and Native Mode...

Reply
 
Old 05-27-2006   #1 (permalink)
Zack Whittaker


 
 

Re: Vista and Native Mode...

All I could really suggest is a clean install... but that might not be much
use to you (
Just a thought really )

--
Zack Whittaker
» ZackNET Enterprises: www.zacknet.co.uk
» MSBlog on ResDev: www.msblog.org
» Vista Knowledge Base: www.vistabase.co.uk
» This mailing is provided "as is" with no warranties, and confers no
rights. All opinions expressed are those of myself unless stated so, and not
of my employer, best friend, Ghandi, my mother or my cat. Glad we cleared
that up!

--: Original message follows :--
"Michael Luschas" <mluschas@gmail.com> wrote in message
news:FDA0570F-09CC-4BEF-AF42-9E71D39B1364@microsoft.com...
>I currently have a copy of vista (5308) that was sent to me by Daryll (who
>is over on facebook alot as an MS employee). My hardware is this
>
> 2 SATA drives
> 1 DVD +/- DL RW drive (PATA)
> 2.8 Ghz HT P4
> 2 Gig Dual Channel RAM
> nVidia FX 5200 (256MB VRAM 8x AGP)
> Asus P4P 800 SE mobo
>
> Well if I have Native mode selected for my HD Control (It has
> Native/Enhanced and Compatibility). The difference is that Enhanced mode
> allows for 4 PATA and 2 SATA drives = 6 total. Compat mode only allows for
> 4 drives (PATA Only, Primary PATA + SATA, Secondary PATA + SATA)
>
> Whenever I have it on Enhanced mode, Vista will not boot, Vista will not
> install. The install crashes and booting it tells me my kernel is corrupt
> (otherwise, not found). The minute i switch back to compat. everything is
> fine (except Disk I/O isnt as good).
>
> Is this a Vista problem, or would it be a motherboard problem ?? Since it
> works fine in all other OSes (ok at first there was a problem with linux,
> but the new kernel fixed that), im assuming it is a vista problem.
> Does anyone have any ideas on it ?




My System SpecsSystem Spec
Old 05-28-2006   #2 (permalink)
Jeff Warren


 
 

Re: Vista and Native Mode...

This usually indicates Vista does not have a driver to address your SATA
controller directly, so the SATA controller is emulating a PATA controller,
which Vista is talking fine with. You will probably need to obtain an
updated Vista compatible driver for your SATA controller.

Jeff Warren

"Michael Luschas" <mluschas@gmail.com> wrote in message
news:FDA0570F-09CC-4BEF-AF42-9E71D39B1364@microsoft.com...
>I currently have a copy of vista (5308) that was sent to me by Daryll (who
>is over on facebook alot as an MS employee). My hardware is this
>
> 2 SATA drives
> 1 DVD +/- DL RW drive (PATA)
> 2.8 Ghz HT P4
> 2 Gig Dual Channel RAM
> nVidia FX 5200 (256MB VRAM 8x AGP)
> Asus P4P 800 SE mobo
>
> Well if I have Native mode selected for my HD Control (It has
> Native/Enhanced and Compatibility). The difference is that Enhanced mode
> allows for 4 PATA and 2 SATA drives = 6 total. Compat mode only allows for
> 4 drives (PATA Only, Primary PATA + SATA, Secondary PATA + SATA)
>
> Whenever I have it on Enhanced mode, Vista will not boot, Vista will not
> install. The install crashes and booting it tells me my kernel is corrupt
> (otherwise, not found). The minute i switch back to compat. everything is
> fine (except Disk I/O isnt as good).
>
> Is this a Vista problem, or would it be a motherboard problem ?? Since it
> works fine in all other OSes (ok at first there was a problem with linux,
> but the new kernel fixed that), im assuming it is a vista problem.
> Does anyone have any ideas on it ?



My System SpecsSystem Spec
Old 05-28-2006   #3 (permalink)
Michael Luschas


 
 

Vista and Native Mode...

I currently have a copy of vista (5308) that was sent to me by Daryll (who
is over on facebook alot as an MS employee). My hardware is this

2 SATA drives
1 DVD +/- DL RW drive (PATA)
2.8 Ghz HT P4
2 Gig Dual Channel RAM
nVidia FX 5200 (256MB VRAM 8x AGP)
Asus P4P 800 SE mobo

Well if I have Native mode selected for my HD Control (It has
Native/Enhanced and Compatibility). The difference is that Enhanced mode
allows for 4 PATA and 2 SATA drives = 6 total. Compat mode only allows for 4
drives (PATA Only, Primary PATA + SATA, Secondary PATA + SATA)

Whenever I have it on Enhanced mode, Vista will not boot, Vista will not
install. The install crashes and booting it tells me my kernel is corrupt
(otherwise, not found). The minute i switch back to compat. everything is
fine (except Disk I/O isnt as good).

Is this a Vista problem, or would it be a motherboard problem ?? Since it
works fine in all other OSes (ok at first there was a problem with linux,
but the new kernel fixed that), im assuming it is a vista problem.
Does anyone have any ideas on it ?

My System SpecsSystem Spec
Old 05-29-2006   #4 (permalink)
Michael Luschas


 
 

Re: Vista and Native Mode...

Well it was adressing it fine. Also, It was a clean install (attempt). lol.
What i mean by adressing it, was that it was finding it without loading
drivers, and its not a RAID.

"Jeff Warren" <user@domain.com> wrote in message
news:%23yxM8FhgGHA.1520@TK2MSFTNGP03.phx.gbl...
> This usually indicates Vista does not have a driver to address your SATA
> controller directly, so the SATA controller is emulating a PATA
> controller, which Vista is talking fine with. You will probably need to
> obtain an updated Vista compatible driver for your SATA controller.
>
> Jeff Warren
>
> "Michael Luschas" <mluschas@gmail.com> wrote in message
> news:FDA0570F-09CC-4BEF-AF42-9E71D39B1364@microsoft.com...
>>I currently have a copy of vista (5308) that was sent to me by Daryll (who
>>is over on facebook alot as an MS employee). My hardware is this
>>
>> 2 SATA drives
>> 1 DVD +/- DL RW drive (PATA)
>> 2.8 Ghz HT P4
>> 2 Gig Dual Channel RAM
>> nVidia FX 5200 (256MB VRAM 8x AGP)
>> Asus P4P 800 SE mobo
>>
>> Well if I have Native mode selected for my HD Control (It has
>> Native/Enhanced and Compatibility). The difference is that Enhanced mode
>> allows for 4 PATA and 2 SATA drives = 6 total. Compat mode only allows
>> for 4 drives (PATA Only, Primary PATA + SATA, Secondary PATA + SATA)
>>
>> Whenever I have it on Enhanced mode, Vista will not boot, Vista will not
>> install. The install crashes and booting it tells me my kernel is corrupt
>> (otherwise, not found). The minute i switch back to compat. everything is
>> fine (except Disk I/O isnt as good).
>>
>> Is this a Vista problem, or would it be a motherboard problem ?? Since it
>> works fine in all other OSes (ok at first there was a problem with linux,
>> but the new kernel fixed that), im assuming it is a vista problem.
>> Does anyone have any ideas on it ?

>
>


My System SpecsSystem Spec
Reply

Thread Tools


Similar Threads
Thread Forum
Native Instruments Komplete 5 on Vista 64 Software
Vista Will Not Permanently Keep Native Resolution Vista performance & maintenance
SATA Port Legacy or Native IDE mode? Vista hardware & devices
Vista native resolution Vista hardware & devices


Vista Forums is an independent web site and has not been authorized,
sponsored, or otherwise approved by Microsoft Corporation.
"Windows Vista", the Start Orb, and related materials are trademarks of Microsoft Corp.
© Designer Media Ltd

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46