|
 |  |  |  |  |  |  |
| Welcome to Windows Vista Forums. Our forum is dedicated to helping you find solutions with any problems, errors or issues you are experiencing with Windows Vista. The Vista forum also covers news and updates and has an extensive Windows Vista tutorial section that covers a wide range of tips and tricks. |
| |||||||
 |
| |
12-18-2006
| #1 (permalink) |
| | XP MCE to Vista Upgrade Failure at Phase 2: Hello, I am trying to upgrade an XP MCE SP2 Notebook computer (HP Pavilion zv6100) to Vista. A clean install of Vista works perfectly, however, I am going crazy trying to get the upgrade to work. The notebook currently has no additional hardware. the specs are: ===================================================== Microprocessor 2.0 GHz AMD Athlon™64 Processor 3200+ with PowerNow!™ Technology Microprocessor Cache 512KB L2 Cache Memory 512MB 333MHz DDR System Memory (2 Dimm) Memory Max 2048MB Video Graphics ATI RADEON® XPRESS 200M IGP Video Memory 128MB DDR (dedicated) Hard Drive 100GB (4200RPM) Hard Drive ==================================================== The first phase of the install goes through okay. On the UI, it says expanding files (21%) and then reboots. After the reboot, the install UI comes up, the statys stays "expanding files (21%)" but the ellipses (dots) move (so it seems that the installer is trying to do something). After about 10 minutes, the installer throws a popup saying "Install is cancelled. The installer encountered an error and cannot continue". It does not provide any additional description. If I reboot at this stage, the machine reboots to a screen that says rolling back install, and then reboots again, at which point the machine becomes unusable (The boot loader screen still comes up, but both the Windows boot up option and the Previous version of Windows" option throw up errors (Windows error is about Winloader not found, the other one complains about ntldr not found). At this point I have to restore machine back to the pre-vista install state from backup (which I luckily made before installnig Vista). I have been trying to do the upgrade with exact same results for the past couple of weeks. I have looked at the Setupact.log files inthe Panther directory. This file has the following error towards the end: =================================================== 2006-12-18 00:28:34, Info [0x0800c9] MIG WinPEGather: Migrating from (X:\WINDOWS) to (X:\$UPGRADE.~OS\OfflineUpgradeStore) 2006-12-18 00:28:34, Info [0x0800f5] MIG CheckAndEnableDiagnostics: Upgrade diagnostics enabled. 2006-12-18 00:28:34, Info [0x080073] MIG Migrate: Migration side is: source 2006-12-18 00:28:34, Info [0x080074] MIG Migrate: Initializing migration engine in offline mode (X:\WINDOWS) 2006-12-18 00:28:34, Info Entering MigStartUpOffline method 2006-12-18 00:28:34, Info [0x0803c0] MIG Initializing offline WinNT platform (Read/Write) 2006-12-18 00:28:34, Info MIG Platform is using admin privileges 2006-12-18 00:28:34, Info [0x0803e2] MIG Adding indirect mapping from HKLM\SAM to <X:\WINDOWS\system32\config\sam> loaded at HKEY_LOCAL_MACHINE\$DEST$SAM (R/W) 2006-12-18 00:28:34, Info [0x0803e4] MIG Successfully mapped HKLM\SAM 2006-12-18 00:28:34, Info [0x0803e2] MIG Adding indirect mapping from HKLM\SECURITY to <X:\WINDOWS\system32\config\security> loaded at HKEY_LOCAL_MACHINE\$DEST$SECURITY (R/W) 2006-12-18 00:28:34, Info [0x0803e4] MIG Successfully mapped HKLM\SECURITY 2006-12-18 00:28:34, Info [0x0803e2] MIG Adding indirect mapping from HKLM\SOFTWARE to <X:\WINDOWS\system32\config\software> loaded at HKEY_LOCAL_MACHINE\$DEST$SOFTWARE (R/W) 2006-12-18 00:28:37, Info [0x0803e4] MIG Successfully mapped HKLM\SOFTWARE 2006-12-18 00:28:37, Info [0x0803e2] MIG Adding indirect mapping from HKLM\SYSTEM to <X:\WINDOWS\system32\config\system> loaded at HKEY_LOCAL_MACHINE\$DEST$SYSTEM (R/W) 2006-12-18 00:28:38, Info [0x0803e4] MIG Successfully mapped HKLM\SYSTEM 2006-12-18 00:28:38, Info [0x0803e2] MIG Adding indirect mapping from HKU\.DEFAULT to <X:\WINDOWS\system32\config\default> loaded at HKEY_LOCAL_MACHINE\$DEST$DEFAULT (R/W) 2006-12-18 00:28:38, Info [0x0803e4] MIG Successfully mapped HKU\.DEFAULT 2006-12-18 00:28:38, Info [0x0803e2] MIG Adding indirect mapping from HKR to <X:\WINDOWS\system32\config\userdiff> loaded at HKEY_LOCAL_MACHINE\$DEST$USERDIFF (R/W) 2006-12-18 00:28:38, Info [0x0803e4] MIG Successfully mapped HKR 2006-12-18 00:28:38, Info MIG COfflineWinNTPlatform::MapCurrentControlSet, current control set number is 1. 2006-12-18 00:28:38, Info [0x0803df] MIG Adding direct mapping from HKLM\SYSTEM\CurrentControlSet to <unknown registry key>\ControlSet001 (R/W) 2006-12-18 00:28:38, Warning [0x0803d8] MIG DirectKeyMapper: RegOpenKeyEx(<unknown registry key>,ControlSet001,R/W) failed (2) 2006-12-18 00:28:38, Warning [0x0803de] MIG Failed to unload hive at HKEY_LOCAL_MACHINE\$DEST$SAM (error 1314) 2006-12-18 00:28:38, Warning MIG Failed to close keymapper 'SAM': error 1314 2006-12-18 00:28:38, Warning [0x0803de] MIG Failed to unload hive at HKEY_LOCAL_MACHINE\$DEST$SAM (error 1314) 2006-12-18 00:28:38, Warning [0x0803de] MIG Failed to unload hive at HKEY_LOCAL_MACHINE\$DEST$SECURITY (error 1314) 2006-12-18 00:28:38, Warning MIG Failed to close keymapper 'SECURITY': error 1314 2006-12-18 00:28:38, Warning [0x0803de] MIG Failed to unload hive at HKEY_LOCAL_MACHINE\$DEST$SECURITY (error 1314) 2006-12-18 00:28:38, Warning [0x0803de] MIG Failed to unload hive at HKEY_LOCAL_MACHINE\$DEST$SOFTWARE (error 1314) 2006-12-18 00:28:38, Warning MIG Failed to close keymapper 'SOFTWARE': error 1314 2006-12-18 00:28:38, Warning [0x0803de] MIG Failed to unload hive at HKEY_LOCAL_MACHINE\$DEST$SOFTWARE (error 1314) 2006-12-18 00:28:38, Warning [0x0803de] MIG Failed to unload hive at HKEY_LOCAL_MACHINE\$DEST$SYSTEM (error 1314) 2006-12-18 00:28:38, Warning MIG Failed to close keymapper 'SYSTEM': error 1314 2006-12-18 00:28:38, Warning [0x0803de] MIG Failed to unload hive at HKEY_LOCAL_MACHINE\$DEST$SYSTEM (error 1314) 2006-12-18 00:28:38, Warning [0x0803de] MIG Failed to unload hive at HKEY_LOCAL_MACHINE\$DEST$USERDIFF (error 1314) 2006-12-18 00:28:38, Warning MIG Failed to close keymapper 'HKR': error 1314 2006-12-18 00:28:38, Warning [0x0803de] MIG Failed to unload hive at HKEY_LOCAL_MACHINE\$DEST$USERDIFF (error 1314) 2006-12-18 00:28:38, Warning [0x0803de] MIG Failed to unload hive at HKEY_LOCAL_MACHINE\$DEST$DEFAULT (error 1314) 2006-12-18 00:28:38, Warning MIG Failed to close keymapper '.DEFAULT': error 1314 2006-12-18 00:28:38, Warning [0x0803de] MIG Failed to unload hive at HKEY_LOCAL_MACHINE\$DEST$DEFAULT (error 1314) 2006-12-18 00:28:38, Error [0x0802fb] MIG MigStartUpOffline caught exception: class Mig::Win32ErrorException: Win32ErrorException: Error(2), CDirectKeyMapper could not open the requested subkey ControlSet001. __thiscall Mig::CDirectKeyMapper::CDirectKeyMapper(struct HKEY__ *,class UnBCL::String *,int) 2006-12-18 00:28:38, Info Leaving MigStartUpOffline method 2006-12-18 00:28:38, Info MIG Migrate: migration operation failed (MigResult=4) 2006-12-18 00:28:38, Info [0x08008c] MIG Migrate: Shutting down with cleanup..., gle:0 2006-12-18 00:28:38, Info MIG MigShutDown returning immediately, since the facade is not initialized 2006-12-18 00:28:38, Info [0x08008d] MIG Migrate : Finished (0) 2006-12-18 00:28:38, Warning [0x0800ca] MIG Callback_GatherWinPE: Migrating from (X:\WINDOWS) to (X:\$UPGRADE.~OS\OfflineUpgradeStore) did not finish successfully! 2006-12-18 00:28:38, Info MIG PublishCriticalError: Windows installation encountered an error and cannot continue. Your computer will now restart, and your previous version of Windows will be restored. 2006-12-18 00:28:38, Info [0x0a013d] UI Accepting Cancel. Exiting Page Progress. 2006-12-18 00:28:38, Info UI Entering Page Cancel. 2006-12-18 00:28:38, Info UI Page with ID 112 returned 0 for CanPageBeActivated with choice 0 2006-12-18 00:28:38, Info UI Page with ID 112 returned 0 for CanPageBeActivated with choice 0 2006-12-18 00:28:38, Info [0x0a011c] UI WizardDialogPost::SetActive ===================================================== The entries: 2006-12-18 00:28:38, Info [0x0803df] MIG Adding direct mapping from HKLM\SYSTEM\CurrentControlSet to <unknown registry key>\ControlSet001 (R/W) 2006-12-18 00:28:38, Warning [0x0803d8] MIG DirectKeyMapper: RegOpenKeyEx(<unknown registry key>,ControlSet001,R/W) failed (2) seem to point towards the installer trying to read a registry entry called "<unknown registry key>\ControlSet001 " and failing. I have no idea how to get past this. Will appreciate any help. Thanks |
My System Specs |
|
12-18-2006
| #2 (permalink) |
| | Re: XP MCE to Vista Upgrade Failure at Phase 2: What version of Vista are you trying to upgrade to? John |
| My System Specs |
|
12-18-2006
| #3 (permalink) |
| | Re: XP MCE to Vista Upgrade Failure at Phase 2: Sorry: Should have added this earlier: trying to upgrade to ultimate edition. Thanks "John C. Iliff" wrote: > What version of Vista are you trying to upgrade to? > > John > > > |
| My System Specs |
|
12-18-2006
| #4 (permalink) |
| | Re: XP MCE to Vista Upgrade Failure at Phase 2: Appears that the upgrade process cannot complete migration of installed application/data - controlsets, e.g.. (controlset001 - there are max of four in the registry - only two used) contain boot data, "last known good configuration) data and also utilized by System Restore. Unfortunately - no info regarding migration blockage. If you have installation disks for installed programs it may be useful to begin uninstalling. "confused-plenty" <confusedplenty@discussions.microsoft.com> wrote in message news:B683A6FD-E482-4725-BC45-B988F776F899@microsoft.com... > Hello, > > I am trying to upgrade an XP MCE SP2 Notebook computer (HP Pavilion > zv6100) > to Vista. A clean install of Vista works perfectly, however, I am going > crazy > trying to get the upgrade to work. > > The notebook currently has no additional hardware. the specs are: > ===================================================== > Microprocessor 2.0 GHz AMD AthlonT64 Processor 3200+ with PowerNow!T > Technology > Microprocessor Cache 512KB L2 Cache > Memory 512MB 333MHz DDR System Memory (2 Dimm) > Memory Max 2048MB > Video Graphics ATI RADEON® XPRESS 200M IGP > Video Memory 128MB DDR (dedicated) > Hard Drive 100GB (4200RPM) Hard Drive > ==================================================== > > The first phase of the install goes through okay. On the UI, it says > expanding files (21%) and then reboots. After the reboot, the install UI > comes up, the statys stays "expanding files (21%)" but the ellipses (dots) > move (so it seems that the installer is trying to do something). After > about > 10 minutes, the installer throws a popup saying "Install is cancelled. The > installer encountered an error and cannot continue". It does not provide > any > additional description. If I reboot at this stage, the machine reboots to > a > screen that says rolling back install, and then reboots again, at which > point > the machine becomes unusable (The boot loader screen still comes up, but > both > the Windows boot up option and the Previous version of Windows" option > throw > up errors (Windows error is about Winloader not found, the other one > complains about ntldr not found). At this point I have to restore machine > back to the pre-vista install state from backup (which I luckily made > before > installnig Vista). > > I have been trying to do the upgrade with exact same results for the past > couple of weeks. I have looked at the Setupact.log files inthe Panther > directory. This file has the following error towards the end: > =================================================== > 2006-12-18 00:28:34, Info [0x0800c9] MIG WinPEGather: Migrating > from (X:\WINDOWS) to (X:\$UPGRADE.~OS\OfflineUpgradeStore) > 2006-12-18 00:28:34, Info [0x0800f5] MIG > CheckAndEnableDiagnostics: > Upgrade diagnostics enabled. > 2006-12-18 00:28:34, Info [0x080073] MIG Migrate: Migration side > is: source > 2006-12-18 00:28:34, Info [0x080074] MIG Migrate: Initializing > migration engine in offline mode (X:\WINDOWS) > 2006-12-18 00:28:34, Info Entering > MigStartUpOffline > method > 2006-12-18 00:28:34, Info [0x0803c0] MIG Initializing offline > WinNT > platform (Read/Write) > 2006-12-18 00:28:34, Info MIG Platform is using admin > privileges > 2006-12-18 00:28:34, Info [0x0803e2] MIG Adding indirect mapping > from HKLM\SAM to <X:\WINDOWS\system32\config\sam> loaded at > HKEY_LOCAL_MACHINE\$DEST$SAM (R/W) > 2006-12-18 00:28:34, Info [0x0803e4] MIG Successfully mapped > HKLM\SAM > 2006-12-18 00:28:34, Info [0x0803e2] MIG Adding indirect mapping > from HKLM\SECURITY to <X:\WINDOWS\system32\config\security> loaded at > HKEY_LOCAL_MACHINE\$DEST$SECURITY (R/W) > 2006-12-18 00:28:34, Info [0x0803e4] MIG Successfully mapped > HKLM\SECURITY > 2006-12-18 00:28:34, Info [0x0803e2] MIG Adding indirect mapping > from HKLM\SOFTWARE to <X:\WINDOWS\system32\config\software> loaded at > HKEY_LOCAL_MACHINE\$DEST$SOFTWARE (R/W) > 2006-12-18 00:28:37, Info [0x0803e4] MIG Successfully mapped > HKLM\SOFTWARE > 2006-12-18 00:28:37, Info [0x0803e2] MIG Adding indirect mapping > from HKLM\SYSTEM to <X:\WINDOWS\system32\config\system> loaded at > HKEY_LOCAL_MACHINE\$DEST$SYSTEM (R/W) > 2006-12-18 00:28:38, Info [0x0803e4] MIG Successfully mapped > HKLM\SYSTEM > 2006-12-18 00:28:38, Info [0x0803e2] MIG Adding indirect mapping > from HKU\.DEFAULT to <X:\WINDOWS\system32\config\default> loaded at > HKEY_LOCAL_MACHINE\$DEST$DEFAULT (R/W) > 2006-12-18 00:28:38, Info [0x0803e4] MIG Successfully mapped > HKU\.DEFAULT > 2006-12-18 00:28:38, Info [0x0803e2] MIG Adding indirect mapping > from HKR to <X:\WINDOWS\system32\config\userdiff> loaded at > HKEY_LOCAL_MACHINE\$DEST$USERDIFF (R/W) > 2006-12-18 00:28:38, Info [0x0803e4] MIG Successfully mapped HKR > 2006-12-18 00:28:38, Info MIG > COfflineWinNTPlatform::MapCurrentControlSet, current control set number is > 1. > 2006-12-18 00:28:38, Info [0x0803df] MIG Adding direct mapping > from > HKLM\SYSTEM\CurrentControlSet to <unknown registry key>\ControlSet001 > (R/W) > 2006-12-18 00:28:38, Warning [0x0803d8] MIG DirectKeyMapper: > RegOpenKeyEx(<unknown registry key>,ControlSet001,R/W) failed (2) > 2006-12-18 00:28:38, Warning [0x0803de] MIG Failed to unload hive at > HKEY_LOCAL_MACHINE\$DEST$SAM (error 1314) > 2006-12-18 00:28:38, Warning MIG Failed to close > keymapper > 'SAM': error 1314 > 2006-12-18 00:28:38, Warning [0x0803de] MIG Failed to unload hive at > HKEY_LOCAL_MACHINE\$DEST$SAM (error 1314) > 2006-12-18 00:28:38, Warning [0x0803de] MIG Failed to unload hive at > HKEY_LOCAL_MACHINE\$DEST$SECURITY (error 1314) > 2006-12-18 00:28:38, Warning MIG Failed to close > keymapper > 'SECURITY': error 1314 > 2006-12-18 00:28:38, Warning [0x0803de] MIG Failed to unload hive at > HKEY_LOCAL_MACHINE\$DEST$SECURITY (error 1314) > 2006-12-18 00:28:38, Warning [0x0803de] MIG Failed to unload hive at > HKEY_LOCAL_MACHINE\$DEST$SOFTWARE (error 1314) > 2006-12-18 00:28:38, Warning MIG Failed to close > keymapper > 'SOFTWARE': error 1314 > 2006-12-18 00:28:38, Warning [0x0803de] MIG Failed to unload hive at > HKEY_LOCAL_MACHINE\$DEST$SOFTWARE (error 1314) > 2006-12-18 00:28:38, Warning [0x0803de] MIG Failed to unload hive at > HKEY_LOCAL_MACHINE\$DEST$SYSTEM (error 1314) > 2006-12-18 00:28:38, Warning MIG Failed to close > keymapper > 'SYSTEM': error 1314 > 2006-12-18 00:28:38, Warning [0x0803de] MIG Failed to unload hive at > HKEY_LOCAL_MACHINE\$DEST$SYSTEM (error 1314) > 2006-12-18 00:28:38, Warning [0x0803de] MIG Failed to unload hive at > HKEY_LOCAL_MACHINE\$DEST$USERDIFF (error 1314) > 2006-12-18 00:28:38, Warning MIG Failed to close > keymapper > 'HKR': error 1314 > 2006-12-18 00:28:38, Warning [0x0803de] MIG Failed to unload hive at > HKEY_LOCAL_MACHINE\$DEST$USERDIFF (error 1314) > 2006-12-18 00:28:38, Warning [0x0803de] MIG Failed to unload hive at > HKEY_LOCAL_MACHINE\$DEST$DEFAULT (error 1314) > 2006-12-18 00:28:38, Warning MIG Failed to close > keymapper > '.DEFAULT': error 1314 > 2006-12-18 00:28:38, Warning [0x0803de] MIG Failed to unload hive at > HKEY_LOCAL_MACHINE\$DEST$DEFAULT (error 1314) > 2006-12-18 00:28:38, Error [0x0802fb] MIG MigStartUpOffline caught > exception: class Mig::Win32ErrorException: Win32ErrorException: Error(2), > CDirectKeyMapper could not open the requested subkey ControlSet001. > __thiscall Mig::CDirectKeyMapper::CDirectKeyMapper(struct HKEY__ *,class > UnBCL::String *,int) > > 2006-12-18 00:28:38, Info Leaving > MigStartUpOffline > method > 2006-12-18 00:28:38, Info MIG Migrate: migration > operation failed (MigResult=4) > 2006-12-18 00:28:38, Info [0x08008c] MIG Migrate: Shutting down > with cleanup..., gle:0 > 2006-12-18 00:28:38, Info MIG MigShutDown returning > immediately, since the facade is not initialized > 2006-12-18 00:28:38, Info [0x08008d] MIG Migrate : Finished (0) > 2006-12-18 00:28:38, Warning [0x0800ca] MIG Callback_GatherWinPE: > Migrating from (X:\WINDOWS) to (X:\$UPGRADE.~OS\OfflineUpgradeStore) did > not > finish successfully! > 2006-12-18 00:28:38, Info MIG PublishCriticalError: > Windows installation encountered an error and cannot continue. Your > computer > will now restart, and your previous version of Windows will be restored. > 2006-12-18 00:28:38, Info [0x0a013d] UI Accepting Cancel. > Exiting > Page Progress. > 2006-12-18 00:28:38, Info UI Entering Page Cancel. > 2006-12-18 00:28:38, Info UI Page with ID 112 > returned > 0 for CanPageBeActivated with choice 0 > 2006-12-18 00:28:38, Info UI Page with ID 112 > returned > 0 for CanPageBeActivated with choice 0 > 2006-12-18 00:28:38, Info [0x0a011c] UI > WizardDialogPost::SetActive > ===================================================== > > The entries: > > 2006-12-18 00:28:38, Info [0x0803df] MIG Adding direct mapping > from > HKLM\SYSTEM\CurrentControlSet to <unknown registry key>\ControlSet001 > (R/W) > 2006-12-18 00:28:38, Warning [0x0803d8] MIG DirectKeyMapper: > RegOpenKeyEx(<unknown registry key>,ControlSet001,R/W) failed (2) > > seem to point towards the installer trying to read a registry entry called > "<unknown registry key>\ControlSet001 " and failing. I have no idea how to > get past this. Will appreciate any help. > > Thanks |
| My System Specs |
|
02-09-2007
| #5 (permalink) |
| | RE: XP MCE to Vista Upgrade Failure at Phase 2: My problem was solved when I converted FAT to NTFS, then the upgrade went perfect. "confused-plenty" wrote: > Hello, > > I am trying to upgrade an XP MCE SP2 Notebook computer (HP Pavilion zv6100) > to Vista. A clean install of Vista works perfectly, however, I am going crazy > trying to get the upgrade to work. > > The notebook currently has no additional hardware. the specs are: > ===================================================== > Microprocessor 2.0 GHz AMD Athlon™64 Processor 3200+ with PowerNow!™ > Technology > Microprocessor Cache 512KB L2 Cache > Memory 512MB 333MHz DDR System Memory (2 Dimm) > Memory Max 2048MB > Video Graphics ATI RADEON® XPRESS 200M IGP > Video Memory 128MB DDR (dedicated) > Hard Drive 100GB (4200RPM) Hard Drive > ==================================================== > > The first phase of the install goes through okay. On the UI, it says > expanding files (21%) and then reboots. After the reboot, the install UI > comes up, the statys stays "expanding files (21%)" but the ellipses (dots) > move (so it seems that the installer is trying to do something). After about > 10 minutes, the installer throws a popup saying "Install is cancelled. The > installer encountered an error and cannot continue". It does not provide any > additional description. If I reboot at this stage, the machine reboots to a > screen that says rolling back install, and then reboots again, at which point > the machine becomes unusable (The boot loader screen still comes up, but both > the Windows boot up option and the Previous version of Windows" option throw > up errors (Windows error is about Winloader not found, the other one > complains about ntldr not found). At this point I have to restore machine > back to the pre-vista install state from backup (which I luckily made before > installnig Vista). > > I have been trying to do the upgrade with exact same results for the past > couple of weeks. I have looked at the Setupact.log files inthe Panther > directory. This file has the following error towards the end: > =================================================== > 2006-12-18 00:28:34, Info [0x0800c9] MIG WinPEGather: Migrating > from (X:\WINDOWS) to (X:\$UPGRADE.~OS\OfflineUpgradeStore) > 2006-12-18 00:28:34, Info [0x0800f5] MIG CheckAndEnableDiagnostics: > Upgrade diagnostics enabled. > 2006-12-18 00:28:34, Info [0x080073] MIG Migrate: Migration side > is: source > 2006-12-18 00:28:34, Info [0x080074] MIG Migrate: Initializing > migration engine in offline mode (X:\WINDOWS) > 2006-12-18 00:28:34, Info Entering MigStartUpOffline > method > 2006-12-18 00:28:34, Info [0x0803c0] MIG Initializing offline WinNT > platform (Read/Write) > 2006-12-18 00:28:34, Info MIG Platform is using admin > privileges > 2006-12-18 00:28:34, Info [0x0803e2] MIG Adding indirect mapping > from HKLM\SAM to <X:\WINDOWS\system32\config\sam> loaded at > HKEY_LOCAL_MACHINE\$DEST$SAM (R/W) > 2006-12-18 00:28:34, Info [0x0803e4] MIG Successfully mapped HKLM\SAM > 2006-12-18 00:28:34, Info [0x0803e2] MIG Adding indirect mapping > from HKLM\SECURITY to <X:\WINDOWS\system32\config\security> loaded at > HKEY_LOCAL_MACHINE\$DEST$SECURITY (R/W) > 2006-12-18 00:28:34, Info [0x0803e4] MIG Successfully mapped > HKLM\SECURITY > 2006-12-18 00:28:34, Info [0x0803e2] MIG Adding indirect mapping > from HKLM\SOFTWARE to <X:\WINDOWS\system32\config\software> loaded at > HKEY_LOCAL_MACHINE\$DEST$SOFTWARE (R/W) > 2006-12-18 00:28:37, Info [0x0803e4] MIG Successfully mapped > HKLM\SOFTWARE > 2006-12-18 00:28:37, Info [0x0803e2] MIG Adding indirect mapping > from HKLM\SYSTEM to <X:\WINDOWS\system32\config\system> loaded at > HKEY_LOCAL_MACHINE\$DEST$SYSTEM (R/W) > 2006-12-18 00:28:38, Info [0x0803e4] MIG Successfully mapped > HKLM\SYSTEM > 2006-12-18 00:28:38, Info [0x0803e2] MIG Adding indirect mapping > from HKU\.DEFAULT to <X:\WINDOWS\system32\config\default> loaded at > HKEY_LOCAL_MACHINE\$DEST$DEFAULT (R/W) > 2006-12-18 00:28:38, Info [0x0803e4] MIG Successfully mapped > HKU\.DEFAULT > 2006-12-18 00:28:38, Info [0x0803e2] MIG Adding indirect mapping > from HKR to <X:\WINDOWS\system32\config\userdiff> loaded at > HKEY_LOCAL_MACHINE\$DEST$USERDIFF (R/W) > 2006-12-18 00:28:38, Info [0x0803e4] MIG Successfully mapped HKR > 2006-12-18 00:28:38, Info MIG > COfflineWinNTPlatform::MapCurrentControlSet, current control set number is 1. > 2006-12-18 00:28:38, Info [0x0803df] MIG Adding direct mapping from > HKLM\SYSTEM\CurrentControlSet to <unknown registry key>\ControlSet001 (R/W) > 2006-12-18 00:28:38, Warning [0x0803d8] MIG DirectKeyMapper: > RegOpenKeyEx(<unknown registry key>,ControlSet001,R/W) failed (2) > 2006-12-18 00:28:38, Warning [0x0803de] MIG Failed to unload hive at > HKEY_LOCAL_MACHINE\$DEST$SAM (error 1314) > 2006-12-18 00:28:38, Warning MIG Failed to close keymapper > 'SAM': error 1314 > 2006-12-18 00:28:38, Warning [0x0803de] MIG Failed to unload hive at > HKEY_LOCAL_MACHINE\$DEST$SAM (error 1314) > 2006-12-18 00:28:38, Warning [0x0803de] MIG Failed to unload hive at > HKEY_LOCAL_MACHINE\$DEST$SECURITY (error 1314) > 2006-12-18 00:28:38, Warning MIG Failed to close keymapper > 'SECURITY': error 1314 > 2006-12-18 00:28:38, Warning [0x0803de] MIG Failed to unload hive at > HKEY_LOCAL_MACHINE\$DEST$SECURITY (error 1314) > 2006-12-18 00:28:38, Warning [0x0803de] MIG Failed to unload hive at > HKEY_LOCAL_MACHINE\$DEST$SOFTWARE (error 1314) > 2006-12-18 00:28:38, Warning MIG Failed to close keymapper > 'SOFTWARE': error 1314 > 2006-12-18 00:28:38, Warning [0x0803de] MIG Failed to unload hive at > HKEY_LOCAL_MACHINE\$DEST$SOFTWARE (error 1314) > 2006-12-18 00:28:38, Warning [0x0803de] MIG Failed to unload hive at > HKEY_LOCAL_MACHINE\$DEST$SYSTEM (error 1314) > 2006-12-18 00:28:38, Warning MIG Failed to close keymapper > 'SYSTEM': error 1314 > 2006-12-18 00:28:38, Warning [0x0803de] MIG Failed to unload hive at > HKEY_LOCAL_MACHINE\$DEST$SYSTEM (error 1314) > 2006-12-18 00:28:38, Warning [0x0803de] MIG Failed to unload hive at > HKEY_LOCAL_MACHINE\$DEST$USERDIFF (error 1314) > 2006-12-18 00:28:38, Warning MIG Failed to close keymapper > 'HKR': error 1314 > 2006-12-18 00:28:38, Warning [0x0803de] MIG Failed to unload hive at > HKEY_LOCAL_MACHINE\$DEST$USERDIFF (error 1314) > 2006-12-18 00:28:38, Warning [0x0803de] MIG Failed to unload hive at > HKEY_LOCAL_MACHINE\$DEST$DEFAULT (error 1314) > 2006-12-18 00:28:38, Warning MIG Failed to close keymapper > '.DEFAULT': error 1314 > 2006-12-18 00:28:38, Warning [0x0803de] MIG Failed to unload hive at > HKEY_LOCAL_MACHINE\$DEST$DEFAULT (error 1314) > 2006-12-18 00:28:38, Error [0x0802fb] MIG MigStartUpOffline caught > exception: class Mig::Win32ErrorException: Win32ErrorException: Error(2), > CDirectKeyMapper could not open the requested subkey ControlSet001. > __thiscall Mig::CDirectKeyMapper::CDirectKeyMapper(struct HKEY__ *,class > UnBCL::String *,int) > > 2006-12-18 00:28:38, Info Leaving MigStartUpOffline > method > 2006-12-18 00:28:38, Info MIG Migrate: migration > operation failed (MigResult=4) > 2006-12-18 00:28:38, Info [0x08008c] MIG Migrate: Shutting down > with cleanup..., gle:0 > 2006-12-18 00:28:38, Info MIG MigShutDown returning > immediately, since the facade is not initialized > 2006-12-18 00:28:38, Info [0x08008d] MIG Migrate : Finished (0) > 2006-12-18 00:28:38, Warning [0x0800ca] MIG Callback_GatherWinPE: > Migrating from (X:\WINDOWS) to (X:\$UPGRADE.~OS\OfflineUpgradeStore) did not > finish successfully! > 2006-12-18 00:28:38, Info MIG PublishCriticalError: > Windows installation encountered an error and cannot continue. Your computer > will now restart, and your previous version of Windows will be restored. > 2006-12-18 00:28:38, Info [0x0a013d] UI Accepting Cancel. Exiting > Page Progress. > 2006-12-18 00:28:38, Info UI Entering Page Cancel. > 2006-12-18 00:28:38, Info UI Page with ID 112 returned > 0 for CanPageBeActivated with choice 0 > 2006-12-18 00:28:38, Info UI Page with ID 112 returned > 0 for CanPageBeActivated with choice 0 > 2006-12-18 00:28:38, Info [0x0a011c] UI WizardDialogPost::SetActive > ===================================================== > > The entries: > > 2006-12-18 00:28:38, Info [0x0803df] MIG Adding direct mapping from > HKLM\SYSTEM\CurrentControlSet to <unknown registry key>\ControlSet001 (R/W) > 2006-12-18 00:28:38, Warning [0x0803d8] MIG DirectKeyMapper: > RegOpenKeyEx(<unknown registry key>,ControlSet001,R/W) failed (2) > > seem to point towards the installer trying to read a registry entry called > "<unknown registry key>\ControlSet001 " and failing. I have no idea how to > get past this. Will appreciate any help. > > Thanks |
| My System Specs |
|
| Thread Tools | |
| |
Similar Threads | ||||
| Thread | Forum | |||
| Vista Ultimate Upgrade Failure | Vista General | |||
| Windows Vista failure to upgrade... | Vista General | |||
| upgrade from vista business to ultimate failure | Vista installation & setup | |||
| Vista Upgrade Failure on XP Pro | Vista installation & setup | |||
| XP Pro to Vista Business upgrade failure | Vista installation & setup | |||
