I've looked over all the tips on here and cannot find an answer...I ran the
upgrade advisor said everything was fine. Im running a AMD 2500 XP Barton
Core (1.83 Ghz) 1.5 Gig of Ram and a 300 Gig Harddrive. I've mounted the
image with daemon tools, I've ran from the windows xp startup, I've ran from
the pc booting up and still get the same error 80070241, I've also burned the
image at lowest possible setting and its still giving me the exact same error
it stops at 7% everytime. This is a clean install with xp sp2. I am using a
Asus A7n8x2.0 Board with bios version 1007. Any help would be greatly
appreciated. I am using an ata harddrive and there is nothing in bios that I
can find that would be causing an issue from what I have read.

I'm having the same problem. I get a little further into the install (~30%),
then it gives me a [80070241] error. I'm doing a fresh install. I have two
HDD's, the one I'm installing to is the slave. The master does not have on
OS on it.

Here is the contents of the SetupErr.log file:
Error [0x0604ad] IBS Callback_CopySetupFiles:An error occurred while
copying Setup files. Error code is [0x80070241][gle=0x00000241]

The windows version is: 6.0.5384.4 (winmain_beta2.060518-1455)

Thanks for any support you can give.

"Krush" wrote:

> I've looked over all the tips on here and cannot find an answer...I ran the
> upgrade advisor said everything was fine. Im running a AMD 2500 XP Barton
> Core (1.83 Ghz) 1.5 Gig of Ram and a 300 Gig Harddrive. I've mounted the
> image with daemon tools, I've ran from the windows xp startup, I've ran from
> the pc booting up and still get the same error 80070241, I've also burned the
> image at lowest possible setting and its still giving me the exact same error
> it stops at 7% everytime. This is a clean install with xp sp2. I am using a
> Asus A7n8x2.0 Board with bios version 1007. Any help would be greatly
> appreciated. I am using an ata harddrive and there is nothing in bios that I
> can find that would be causing an issue from what I have read.

I'm having the same problem. I get about 30% into the install and I get a
[80070241] error. It says something about an error while copying a file.

I'm doing a clean install. My machine has 2 HDDs, the drive I'm installing
to is clean, the other has no OS.

The version I'm trying is: 6.0.5384.4 (winmain_beta2.060518-1455)

This is the exact error I get: Error [0x0604ad] IBS
Callback_CopySetupFiles:An error occurred while copying Setup files. Error
code is [0x80070241][gle=0x00000241]

I have the setupact.log and setuperr.log files if they woudl be helping.

Thanks for any support.

I would suggest extracting the contents of the ISO to a location on your
hard disk and run setup from there. Don't extract it to the target location.
--
--
Andre
Windows Connected | http://www.windowsconnected.com
Extended64 | http://www.extended64.com
Blog | http://www.extended64.com/blogs/andre
http://spaces.msn.com/members/adacosta

"Krush" <Krush@discussions.microsoft.com> wrote in message
news:160678C7-EC31-462A-89E9-681788337C2B@microsoft.com...
> I've looked over all the tips on here and cannot find an answer...I ran
> the
> upgrade advisor said everything was fine. Im running a AMD 2500 XP Barton
> Core (1.83 Ghz) 1.5 Gig of Ram and a 300 Gig Harddrive. I've mounted the
> image with daemon tools, I've ran from the windows xp startup, I've ran
> from
> the pc booting up and still get the same error 80070241, I've also burned
> the
> image at lowest possible setting and its still giving me the exact same
> error
> it stops at 7% everytime. This is a clean install with xp sp2. I am
> using a
> Asus A7n8x2.0 Board with bios version 1007. Any help would be greatly
> appreciated. I am using an ata harddrive and there is nothing in bios that
> I
> can find that would be causing an issue from what I have read.

I have tried to burn the ISO file and got a [80070241] error
Same results for mounting and copying the disc to the Hard disk and run
setup from there

any idea of what to do (except re downloading)

"Andre Da Costa [Extended64]" wrote:

> I would suggest extracting the contents of the ISO to a location on your
> hard disk and run setup from there. Don't extract it to the target location.
> --
> --
> Andre
> Windows Connected | http://www.windowsconnected.com
> Extended64 | http://www.extended64.com
> Blog | http://www.extended64.com/blogs/andre
> http://spaces.msn.com/members/adacosta
>
> "Krush" <Krush@discussions.microsoft.com> wrote in message
> news:160678C7-EC31-462A-89E9-681788337C2B@microsoft.com...
> > I've looked over all the tips on here and cannot find an answer...I ran
> > the
> > upgrade advisor said everything was fine. Im running a AMD 2500 XP Barton
> > Core (1.83 Ghz) 1.5 Gig of Ram and a 300 Gig Harddrive. I've mounted the
> > image with daemon tools, I've ran from the windows xp startup, I've ran
> > from
> > the pc booting up and still get the same error 80070241, I've also burned
> > the
> > image at lowest possible setting and its still giving me the exact same
> > error
> > it stops at 7% everytime. This is a clean install with xp sp2. I am
> > using a
> > Asus A7n8x2.0 Board with bios version 1007. Any help would be greatly
> > appreciated. I am using an ata harddrive and there is nothing in bios that
> > I
> > can find that would be causing an issue from what I have read.
>
>
>

I've got the same problem but with an installation progress of 15 %. The
problem apperas even after burning on two different DVD. But, for
information, I had a problem with the download manager, which stopped the
downloading and restarted it at the same point. An error in the file could be
the problem (no physical error detected on the second DVD by Nero).
I try to download the ISO image file again. If the installation works, I'll
post a new message in the coming hours.

"Krush" wrote:

> I've looked over all the tips on here and cannot find an answer...I ran the
> upgrade advisor said everything was fine. Im running a AMD 2500 XP Barton
> Core (1.83 Ghz) 1.5 Gig of Ram and a 300 Gig Harddrive. I've mounted the
> image with daemon tools, I've ran from the windows xp startup, I've ran from
> the pc booting up and still get the same error 80070241, I've also burned the
> image at lowest possible setting and its still giving me the exact same error
> it stops at 7% everytime. This is a clean install with xp sp2. I am using a
> Asus A7n8x2.0 Board with bios version 1007. Any help would be greatly
> appreciated. I am using an ata harddrive and there is nothing in bios that I
> can find that would be causing an issue from what I have read.

I've got the same problem but with an installation progress of 15 %. The
issue appears with two different DVDs and with an installation on WinXP sp2
or on a formated HD. But I got an error when downloading the image file with
the download manager. The process stopped and restarted at the same point.
Maybe this error could have made the file being corrupted (logical corruption
because after verification with Nero, there was no physical read error with
my two DVDs).
I download the ISO image file again at the moment and I'll try a new
installation in the coming hours. I'll post a message in the same topic if
the download error is the solution to my problem.

Sorry for my not very good english !!!!!!!!!

"Krush" wrote:

> I've looked over all the tips on here and cannot find an answer...I ran the
> upgrade advisor said everything was fine. Im running a AMD 2500 XP Barton
> Core (1.83 Ghz) 1.5 Gig of Ram and a 300 Gig Harddrive. I've mounted the
> image with daemon tools, I've ran from the windows xp startup, I've ran from
> the pc booting up and still get the same error 80070241, I've also burned the
> image at lowest possible setting and its still giving me the exact same error
> it stops at 7% everytime. This is a clean install with xp sp2. I am using a
> Asus A7n8x2.0 Board with bios version 1007. Any help would be greatly
> appreciated. I am using an ata harddrive and there is nothing in bios that I
> can find that would be causing an issue from what I have read.

I've got the same problem but with an installation progress of 15 %. The
issue appears with two different DVDs and with an installation on WinXP sp2
or on a formated HD. But I got an error when downloading the image file with
the download manager. The process stopped and restarted at the same point.
Maybe this error could have made the file being corrupted (logical corruption
because after verification with Nero, there was no physical read error with
my two DVDs).
I download the ISO image file again at the moment and I'll try a new
installation in the coming hours. I'll post a message in the same topic if
the download error is the solution to my problem.

Sorry for my not very good english !!!!!!!!!


"Krush" wrote:

> I've looked over all the tips on here and cannot find an answer...I ran the
> upgrade advisor said everything was fine. Im running a AMD 2500 XP Barton
> Core (1.83 Ghz) 1.5 Gig of Ram and a 300 Gig Harddrive. I've mounted the
> image with daemon tools, I've ran from the windows xp startup, I've ran from
> the pc booting up and still get the same error 80070241, I've also burned the
> image at lowest possible setting and its still giving me the exact same error
> it stops at 7% everytime. This is a clean install with xp sp2. I am using a
> Asus A7n8x2.0 Board with bios version 1007. Any help would be greatly
> appreciated. I am using an ata harddrive and there is nothing in bios that I
> can find that would be causing an issue from what I have read.

I've got the same problem but with an installation progress of 15 %. The
issue appears with two different DVDs and with an installation on WinXP sp2
or on a formated HD. But I got an error when downloading the image file with
the download manager. The process stopped and restarted at the same point.
Maybe this error could have made the file being corrupted (logical corruption
because after verification with Nero, there was no physical read error with
my two DVDs).
I download the ISO image file again at the moment and I'll try a new
installation in the coming hours. I'll post a message in the same topic if
the download error is the solution to my problem.

Sorry for my not very good english !!!!!!!!!


"Krush" wrote:

> I've looked over all the tips on here and cannot find an answer...I ran the
> upgrade advisor said everything was fine. Im running a AMD 2500 XP Barton
> Core (1.83 Ghz) 1.5 Gig of Ram and a 300 Gig Harddrive. I've mounted the
> image with daemon tools, I've ran from the windows xp startup, I've ran from
> the pc booting up and still get the same error 80070241, I've also burned the
> image at lowest possible setting and its still giving me the exact same error
> it stops at 7% everytime. This is a clean install with xp sp2. I am using a
> Asus A7n8x2.0 Board with bios version 1007. Any help would be greatly
> appreciated. I am using an ata harddrive and there is nothing in bios that I
> can find that would be causing an issue from what I have read.

I've got the same problem but with an installation progress of 15 %. The
issue appears with two different DVDs and with an installation on WinXP sp2
or on a formated HD. But I got an error when downloading the image file with
the download manager. The process stopped and restarted at the same point.
Maybe this error could have made the file being corrupted (logical corruption
because after verification with Nero, there was no physical read error with
my two DVDs).
I download the ISO image file again at the moment and I'll try a new
installation in the coming hours. I'll post a message in the same topic if
the download error is the solution to my problem.

Sorry for my not very good english !!!!!!!!!


"Krush" wrote:

> I've looked over all the tips on here and cannot find an answer...I ran the
> upgrade advisor said everything was fine. Im running a AMD 2500 XP Barton
> Core (1.83 Ghz) 1.5 Gig of Ram and a 300 Gig Harddrive. I've mounted the
> image with daemon tools, I've ran from the windows xp startup, I've ran from
> the pc booting up and still get the same error 80070241, I've also burned the
> image at lowest possible setting and its still giving me the exact same error
> it stops at 7% everytime. This is a clean install with xp sp2. I am using a
> Asus A7n8x2.0 Board with bios version 1007. Any help would be greatly
> appreciated. I am using an ata harddrive and there is nothing in bios that I
> can find that would be causing an issue from what I have read.