Vista - Windows Easy Transfer (migwiz) hangs on install to source machine (XP)

I searched for this problem, but I can't find it. I bought a new PC
running Vista Ultimate. I have it networked into my home network. My
old PC running XP Professional (SP2) is also on this network. I would
like to transfer settings using Windows Easy Transfer. When I try to
install migwiz on the XP machine, it seems to hang. I originally tried
executing MigSetup.exe from a folder on the Vista machine. I
immediately saw "Starting Windows Easy Transfer" show up in the
taskbar. But then it seemed to take forever so I killed it, copied the
migwiz folder over to the XP machine, rebooted XP, and tried executing
it from there. However it just sat there for quite a while and
nothing happened. So I killed it again and rebooted XP. Then I had the
Vista machine make a CD for moving it to the XP machine. Loaded it in
the CD drive, and it took off. Again, it seemed to hang. I brought up
Task Manager and it showed no applications running. However, migwiz
showed up under processes. For awhile migwiz was utilizing CPU;
eventually it went to 0. Still no application showing. Still nothing
starting.

By this time I was sure that one or more of my earlier abortive
attempts had screwed something up and was preventing it from running,
so I rebooted the XP machine back to a restore point before I had
begun any of this madness.

Still the same behavior: A window opens saying "Starting Windows Easy
Transfer" with a progress bar. When that is done, the window closes,
and I immediately see "Starting Windows Easy Transfer" show up in the
taskbar. Task Manager shows the migwiz.exe process using CPU.
Eventually CPU goes down to 0. Application never shows up in Task
Manager.

I'm about ready to forget Windows Easy Transfer, but I thought that
first I'd ask if anyone has any idea what might be the problem. I'd be
grateful for any suggestions.

Hello KatesMom,

Perhaps we can take a few steps back and retrace some of your steps.

1. You created the Wizard onto the Cd using Windows Easy Transfer on your
Vista machine?
2. Next, you took this CD to your XP Machine and loaded it?
3. Can you provide details on what did and what you saw on the screen from
here on?

Please do not kill any tasks from task Manager. Close any opens Application
that WET lists for you to close.

At the point of failure, please go to the following directory on your XP
(source machine) and look for the file, setupact.log located here:
\\Documents and Settings\<userprofilename>\Local Settings\Application
Data\MigWiz and post the last several lines of the log.

Cheers!
-Vik



"KatesMom" wrote:

> I searched for this problem, but I can't find it. I bought a new PC
> running Vista Ultimate. I have it networked into my home network. My
> old PC running XP Professional (SP2) is also on this network. I would
> like to transfer settings using Windows Easy Transfer. When I try to
> install migwiz on the XP machine, it seems to hang. I originally tried
> executing MigSetup.exe from a folder on the Vista machine. I
> immediately saw "Starting Windows Easy Transfer" show up in the
> taskbar. But then it seemed to take forever so I killed it, copied the
> migwiz folder over to the XP machine, rebooted XP, and tried executing
> it from there. However it just sat there for quite a while and
> nothing happened. So I killed it again and rebooted XP. Then I had the
> Vista machine make a CD for moving it to the XP machine. Loaded it in
> the CD drive, and it took off. Again, it seemed to hang. I brought up
> Task Manager and it showed no applications running. However, migwiz
> showed up under processes. For awhile migwiz was utilizing CPU;
> eventually it went to 0. Still no application showing. Still nothing
> starting.
>
> By this time I was sure that one or more of my earlier abortive
> attempts had screwed something up and was preventing it from running,
> so I rebooted the XP machine back to a restore point before I had
> begun any of this madness.
>
> Still the same behavior: A window opens saying "Starting Windows Easy
> Transfer" with a progress bar. When that is done, the window closes,
> and I immediately see "Starting Windows Easy Transfer" show up in the
> taskbar. Task Manager shows the migwiz.exe process using CPU.
> Eventually CPU goes down to 0. Application never shows up in Task
> Manager.
>
> I'm about ready to forget Windows Easy Transfer, but I thought that
> first I'd ask if anyone has any idea what might be the problem. I'd be
> grateful for any suggestions.
>
>

I have exact same problem. Here are last few lines of setupact.log:

2007-05-20 15:14:43, Info [0x0803e4] MIG Successfully mapped
HKCU\Software\Classes
2007-05-20 15:14:43, Info [0x080489] MIG Setting system object
filter context (User)
2007-05-20 15:14:43, Info [0x0803e6] MIG Removing mapping for
HKCU\Software\Classes
2007-05-20 15:14:44, Info [0x0803e7] MIG Successfully unmapped
HKCU\Software\Classes
2007-05-20 15:14:44, Info [0x0803e6] MIG Removing mapping for
HKCU
2007-05-20 15:14:44, Info [0x0803e7] MIG Successfully unmapped
HKCU
2007-05-20 15:14:44, Info [0x080489] MIG Setting system object
filter context (System)
2007-05-20 15:14:44, Info [0x0803df] MIG Adding direct mapping
from HKCU to HKEY_USERS\S-1-5-21-1417001333-1677128483-2147043339-1004
(R/W)
2007-05-20 15:14:44, Info [0x0803e1] MIG Successfully mapped
HKCU
2007-05-20 15:14:44, Info [0x0803df] MIG Adding direct mapping
from HKCU\Software\Classes to
HKEY_USERS\S-1-5-21-1417001333-1677128483-2147043339-1004_Classes
(R/W)
2007-05-20 15:14:44, Info [0x0803e1] MIG Successfully mapped
HKCU\Software\Classes
2007-05-20 15:14:44, Info [0x080489] MIG Setting system object
filter context (User)
2007-05-20 15:14:48, Info [0x0803e6] MIG Removing mapping for
HKCU\Software\Classes
2007-05-20 15:14:48, Info [0x0803e7] MIG Successfully unmapped
HKCU\Software\Classes
2007-05-20 15:14:48, Info [0x0803e6] MIG Removing mapping for
HKCU
2007-05-20 15:14:48, Info [0x0803e7] MIG Successfully unmapped
HKCU
2007-05-20 15:14:48, Info [0x080489] MIG Setting system object
filter context (System)
2007-05-20 15:14:59, Info MIG EstimationThread
ended at 5/20/2007 19:14:59


--
TJLee089
------------------------------------------------------------------------
TJLee089's Profile: http://forums.techarena.in/member.php?userid=25820
View this thread: http://forums.techarena.in/showthread.php?t=701068

http://forums.techarena.in

Has the problem with WET hanging in the XP environment been addressed
somewhere? I've been to numerous sites looking for a solution but everyone
with this problem seems stuck just like I am.

I get numerous listed in the error log but cannot locate the cause. See
below:

2007-07-29 17:38:51, Error [0x08085f] MIG MigHost:
CMigPluginSurrogate::LoadAndRegisterServerInThreadContext:
LoadLibraryExW(C:\Program
Files\Microsoft\MigWiz\dlmanifests\Microsoft-Windows-IasServer-MigPlugin\IasMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7f.[gle=0x0000007f]
2007-07-29 17:38:51, Error [0x0808ff] MIG
COutOfProcPluginFactory::CreateInstance:
m_currentHostSurrogate->LoadDllServer(C:\Program
Files\Microsoft\MigWiz\dlmanifests\Microsoft-Windows-IasServer-MigPlugin\IasMigPlugin.dll,
{6DF2D9DF-1294-4637-82D3-D53761CA2C11}, 0) failed, hr=[0x8007007f].
2007-07-29 17:38:51, Error [0x080863] MIG MigHost:
CMigPluginSurrogate::COMGenericThreadingHostThreadProc:
LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2007-07-29 17:38:51, Error [0x08085f] MIG MigHost:
CMigPluginSurrogate::LoadAndRegisterServerInThreadContext:
LoadLibraryExW(C:\Program
Files\Microsoft\MigWiz\dlmanifests\Microsoft-Windows-IasServer-MigPlugin\IasMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7f.[gle=0x0000007f]
2007-07-29 17:38:51, Error [0x0808ff] MIG
COutOfProcPluginFactory::CreateInstance:
m_currentHostSurrogate->LoadDllServer(C:\Program
Files\Microsoft\MigWiz\dlmanifests\Microsoft-Windows-IasServer-MigPlugin\IasMigPlugin.dll,
{6DF2D9DF-1294-4637-82D3-D53761CA2C11}, 0) failed, hr=[0x8007007f].
2007-07-29 17:38:51, Error [0x080863] MIG MigHost:
CMigPluginSurrogate::COMGenericThreadingHostThreadProc:
LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2007-07-29 17:38:52, Error [0x08085f] MIG MigHost:
CMigPluginSurrogate::LoadAndRegisterServerInThreadContext:
LoadLibraryExW(C:\Program
Files\Microsoft\MigWiz\dlmanifests\Microsoft-Windows-IasServer-MigPlugin\IasMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7f.[gle=0x0000007f]
2007-07-29 17:38:52, Error [0x080863] MIG MigHost:
CMigPluginSurrogate::COMGenericThreadingHostThreadProc:
LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2007-07-29 17:38:52, Error [0x0808ff] MIG
COutOfProcPluginFactory::CreateInstance:
m_currentHostSurrogate->LoadDllServer(C:\Program
Files\Microsoft\MigWiz\dlmanifests\Microsoft-Windows-IasServer-MigPlugin\IasMigPlugin.dll,
{6DF2D9DF-1294-4637-82D3-D53761CA2C11}, 0) failed, hr=[0x8007007f].
2007-07-29 17:38:53, Error [0x08085f] MIG MigHost:
CMigPluginSurrogate::LoadAndRegisterServerInThreadContext:
LoadLibraryExW(C:\Program
Files\Microsoft\MigWiz\dlmanifests\Microsoft-Windows-IasServer-MigPlugin\IasMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7f.[gle=0x0000007f]
2007-07-29 17:38:53, Error [0x080863] MIG MigHost:
CMigPluginSurrogate::COMGenericThreadingHostThreadProc:
LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2007-07-29 17:38:53, Error [0x0808ff] MIG
COutOfProcPluginFactory::CreateInstance:
m_currentHostSurrogate->LoadDllServer(C:\Program
Files\Microsoft\MigWiz\dlmanifests\Microsoft-Windows-IasServer-MigPlugin\IasMigPlugin.dll,
{6DF2D9DF-1294-4637-82D3-D53761CA2C11}, 0) failed, hr=[0x8007007f].

"Vik" wrote:

> Hello KatesMom,
>
> Perhaps we can take a few steps back and retrace some of your steps.
>
> 1. You created the Wizard onto the Cd using Windows Easy Transfer on your
> Vista machine?
> 2. Next, you took this CD to your XP Machine and loaded it?
> 3. Can you provide details on what did and what you saw on the screen from
> here on?
>
> Please do not kill any tasks from task Manager. Close any opens Application
> that WET lists for you to close.
>
> At the point of failure, please go to the following directory on your XP
> (source machine) and look for the file, setupact.log located here:
> \\Documents and Settings\<userprofilename>\Local Settings\Application
> Data\MigWiz and post the last several lines of the log.
>
> Cheers!
> -Vik
>
>
>
> "KatesMom" wrote:
>
> > I searched for this problem, but I can't find it. I bought a new PC
> > running Vista Ultimate. I have it networked into my home network. My
> > old PC running XP Professional (SP2) is also on this network. I would
> > like to transfer settings using Windows Easy Transfer. When I try to
> > install migwiz on the XP machine, it seems to hang. I originally tried
> > executing MigSetup.exe from a folder on the Vista machine. I
> > immediately saw "Starting Windows Easy Transfer" show up in the
> > taskbar. But then it seemed to take forever so I killed it, copied the
> > migwiz folder over to the XP machine, rebooted XP, and tried executing
> > it from there. However it just sat there for quite a while and
> > nothing happened. So I killed it again and rebooted XP. Then I had the
> > Vista machine make a CD for moving it to the XP machine. Loaded it in
> > the CD drive, and it took off. Again, it seemed to hang. I brought up
> > Task Manager and it showed no applications running. However, migwiz
> > showed up under processes. For awhile migwiz was utilizing CPU;
> > eventually it went to 0. Still no application showing. Still nothing
> > starting.
> >
> > By this time I was sure that one or more of my earlier abortive
> > attempts had screwed something up and was preventing it from running,
> > so I rebooted the XP machine back to a restore point before I had
> > begun any of this madness.
> >
> > Still the same behavior: A window opens saying "Starting Windows Easy
> > Transfer" with a progress bar. When that is done, the window closes,
> > and I immediately see "Starting Windows Easy Transfer" show up in the
> > taskbar. Task Manager shows the migwiz.exe process using CPU.
> > Eventually CPU goes down to 0. Application never shows up in Task
> > Manager.
> >
> > I'm about ready to forget Windows Easy Transfer, but I thought that
> > first I'd ask if anyone has any idea what might be the problem. I'd be
> > grateful for any suggestions.
> >
> >