Vista - Stop:0x0000007b(0x81e03ba0,0xc0000034,0x00000000,0 x00000000)

I get STOP:0X0000007B(0X81E03BA0,0XC0000034,0X00000000,0X00000000) error everytime i boot into windows please tell me how to fix it please!PLEASE!

The whole story if thats important:
http://www.vista64.net/forums/vista-...nnot-boot.html

Not enough info. Are you not getting setup to work, or did you have Vista
on the box then receive this stop error on reboot after install? 32 B or 64
Bit on what type of box?

If it's after install Boot Sector Virus, we hope never and

You may receive a "Stop 0x0000007B" error message in the following
scenarios:• A device driver that the computer boot controller needs is not
configured to start during the startup process.
• A device driver that the computer boot controller needs is corrupted.
• Information in the Windows XP registry (information related to how the
device drivers load during startup) is corrupted.

can evoke this. I'd try a startup repair, and if necessary safe mode from
the Recovery Environment>F8 or a repair install:

If you have a Vista DVD try Startup Repair. If that doesn't work, try Safe
Mode>System Restore from the Recovery Environment, and you always have the
F8 advanced options and a repair install (with the DVD) as well.

***Startup Repair and System Restore from the Win Recovery Environment on
the DVD***

You can run Startup Repair by putting your Vista DVD in after the
language screen in setup. You can also run System Restore from the same
location.

You run the startup repair tool this way (and system restore from here is
also sometimes effective):

http://support.microsoft.com/kb/925810/en-us

How To Run Startup Repair In Vista Ultimate (Multiple Screenshots)
http://www.windowsvista.windowsreins...rtup/index.htm

Note The computer must be configured to start from a CD or from a DVD. For
information about how to configure the computer to start from a CD or from a
DVD, see the information that came with the computer.
2. Restart the computer. To do this, click Start, click the arrow next to
the Lock button, and then click Restart.

This usually means that you enter bios setup by whatever key or keys
(sometimes there is more than one key that will do it for your model--go to
pc manufacturer site) and configure CD to be first in the boot order (this
will allow you to boot from the Vista DVD as well):

See for ref:
Access/Enter Motherboard BIOS
http://www.michaelstevenstech.com/bios_manufacturer.htm

Boot Order in Bios (Set Boot from HD 1st)
http://www.short-media.com/images/mm...ios/bios03.jpg

Note If you cannot restart the computer by using this method, use the power
button to turn off the computer. Then, turn the computer back on.

3. Set your language preference, and then click Next.

Note In most cases, the startup repair process starts automatically, and you
do not have the option to select it in the System Recovery Options menu.

4. Click Repair your computer.

5. In the System Recovery Options dialog box, click the operating system
that you want to repair, and then click Next.

6. In the System Recovery Options menu, click Startup Repair to start the
repair process.

7. When the repair process is complete, click Finish.

Additional References for Startup Repair With Screenshots:

How to Use Startup Repair:

***Accessing Windows RE (Repair Environment):***

1) Insert Media into PC (the DVD you burned)

2) ***You will see on the Vista logo setup screen after lang. options in the
lower left corner, a link called "System Recovery Options."***

Screenshot: System Recovery Options (Lower Left Link)
http://blogs.itecn.net/photos/liuhui...4/500x375.aspx

Screenshot: (Click first option "Startup Repair"
http://www.leedesmond.com/images/img...SysRecOpt2.bmp

How To Run Startup Repair In Vista Ultimate (Multiple Screenshots)
http://www.windowsvista.windowsreins...rtup/index.htm

3) Select your OS for repair.

4) Its been my experience that you can see some causes of the crash from
theWin RE feature:

You'll have a choice there of using:

1) Startup Repair
2) System Restore
3) Complete PC Restore
___________________

***Using the F8 Environment or a Repair Install from the DVD:***

See for ref:
Access/Enter Motherboard BIOS
http://www.michaelstevenstech.com/bios_manufacturer.htm

Boot Order in Bios (Set Boot from HD 1st)
http://www.short-media.com/images/mm...ios/bios03.jpg

Repair Install
http://www.microsoft.com/windowsxp/u...ps/doug92.mspx

Repair Install (Method 2):
http://support.microsoft.com/default.aspx/kb/315341

III Taking Full Advantage of the F8 Options (Windows Advanced Options Menu)
by startin gth ePC and tapping F8 once per second:

You could also:

Think: I have 4 different ways to get back my XP at F8 and try 'em in order.
1) Safe Mode 2) Safe Mode with Cmd to Sys Restore which is simply a cmd
prompt in safe mode 3) Safe Mode with Neworking 4) LKG or Last Known Good
Configuration


Try to F8 to the Windows Adv Options Menu>try 3 safe modes there (I don't
use WGA) and Last Known Good>then I go to Win RE in Vista. That gives you a
choice of Safe Mode, Safe Mode with Networking,and Safe Mode with Command
Prompt.

These methods are outlined in

A description of the Safe Mode Boot options in Windows XP/and Vista
http://support.microsoft.com/kb/315222/

How to Use System Restore

http://bertk.mvps.org/

Frequently Asked Questions Regarding System Restore from MSFT:

http://www.microsoft.com/technet/pro.../faqsrwxp.mspx

Using System Restore

http://tinyurl.com/dvekb

System Restore for Windows XP

http://www.kellys-korner-xp.com/xp_restore.htm

How to start the System Restore tool at a command prompt in Windows XP

http://support.microsoft.com/default...b;en-us;304449


Repair Install: (This option has the best chance of succeeding and it
preserves everything in your OS--you do not lose anything with this option):

Make sure the DVD you have is a Vista DVD

Pitfalls: If the DVD came from friend or relative or P2P, you may have
problems. P2P besides being illlegal in many countries including the U.S.
can be corrupt. If CD came from friend or relative, they may have given
you the CD to use but if product key is in use, MSFT is not going to accept
it for activation. Make sure you clean the CD carefully using proper
cleaning fluid and strokes that radiate from center like spokes on a wheel.

Again a repair install has the most likely chance to succeed, but you need
to have an Vista DVD.
First, in order to do a Repair Install You must boot to the bios setup and
position booting from the "CD" first in the boot order--it probably will not
say DVD but might.

Booting to Bios Setup:

For 85% of PC's and all Dells you can tap the F2 key to reach bios setup.

How To Enable DVD/CD Rom Support (put CD boot first) in bios setup boot
order:

http://xphelpandsupport.mvps.org/how..._support_i.htm

Screen Shot of bios setup boot order:
http://www.poy.net/proxy/bios2.jpg

Repair Install Does Not Lose Anything; you may need to try 2-3 times but
that's rare.

How To Repair Install
http://support.microsoft.com/kb/3153...22120121120120
Screen Shot Repair Install
http://www.windowsreinstall.com/winx...exfullpage.htm

Good luck,

CH


How to troubleshoot "Stop 0x0000007B" errors
http://support.microsoft.com/kb/324103

"Silentblade®" <Silentblade.2q1ty3@no-mx.forums.net> wrote in message
news:Silentblade.2q1ty3@no-mx.forums.net...
>
> I get STOP:0X0000007B(0X81E03BA0,0XC0000034,0X00000000,0X00000000)
> error everytime i boot into windows please tell me how to fix it
> please!PLEASE!
>
>
> --
> Silentblade®

Thanks!! i will try all your tips!

0x0000007B: INACCESSIBLE_BOOT_DEVICE

Windows lost access to the system partition or boot volume during the
startup process. Typical causes: Installing incorrect device drivers when
installing or upgrading storage adapter hardware, or a virus.

What hard drive controller does your computer have? You may need to provide
the controller drivers on floppy or USB stick during Vista install via the
'Load drivers' button.

--
Jane, not plain 64 bit enabled :-)
Batteries not included. Braincell on vacation ;-)
MVP Windows Shell/User
"Silentblade®" <Silentblade.2q1ty3@no-mx.forums.net> wrote in message
news:Silentblade.2q1ty3@no-mx.forums.net...
>
> I get STOP:0X0000007B(0X81E03BA0,0XC0000034,0X00000000,0X00000000)
> error everytime i boot into windows please tell me how to fix it
> please!PLEASE!
>
>
> --
> Silentblade®

I have a western digital hard drive of 76 GB but vista worked fine on it one weeek ago...but i have found a WDC driver and copied it to my floppy but when i reboot my pc it says remove floppy and press a button but how will i able to install the driver then?
EDIT:NOT WORKING..but please tell me how to install drivers from floppy..it does not recognize it! (readme attached)
and i cant boot from DVD it loads the files and then the mouse and keyboard freezes...

On Fri, 4 May 2007 05:44:05 -0500, Silentblade®
<Silentblade.2q21l3@no-mx.forums.net> wrote:

>
>I have a western digital hard drive of 76 GB but vista worked fine on it
>one weeek ago...but i have found a WDC driver and copied it to my floppy
>but when i reboot my pc it says remove floppy and press a button but how
>will i able to install the driver then?
It will ask for the drivers or you will have to press F6 during the
bootup process.

huh? i never saw any ''F6'' in vista setup only ''windows is loading files'' after that, the mouse and kb freezes in the welcome screen
EDIT:I formatted my HD and burned my backup to a DVD after installing windows vista the same stop error again