Windows Vista Forums

UDF file system

  1. #1


    sseligson Guest

    UDF file system

    Just got the DVD directly in the mail from microsoft. I want to install vista.

    On my home built machine with an asrock 939MB and a a opteron 939 I got this
    message

    This disc contains a "UDF" file system and requires an operating system
    that supports the ISO-13346 "UDF" file system specification.

    Tried it on my dell and it autoladed without a problem. Can't figure out
    what this message means. Please help with this one.

      My System SpecsSystem Spec

  2.   


  3. #2


    Rick Guest

    Re: UDF file system

    Are you trying to perform an update from Win XP
    by running the setup program? If so, that's why
    you get the error. The DVD is formatted in UDF.
    That's the standard for DVDs and Win XP does
    not have native support for UDF.

    Boot from the DVD and you won't get that error.
    But you're advised to install Vista on a
    separate partition or hard drive. You may
    encounter problems with your Win XP, especially
    if you install to a partition on the same hard
    drive as XP. The safest thing to do is to
    disable you Win XP hard drive when you install
    Vista and put Vista on a separate hard drive.
    If you "update" XP, make sure you have a full
    back of your Win XP system that you can use to
    restore your XP to the state it was. You will
    have to completely clean the hard drive to
    replace Vista!


    sseligson wrote:
    > Just got the DVD directly in the mail from microsoft. I want to install vista.
    >
    > On my home built machine with an asrock 939MB and a a opteron 939 I got this
    > message
    >
    > This disc contains a "UDF" file system and requires an operating system
    > that supports the ISO-13346 "UDF" file system specification.
    >
    > Tried it on my dell and it autoladed without a problem. Can't figure out
    > what this message means. Please help with this one.


      My System SpecsSystem Spec

  4. #3


    sseligson Guest

    Re: UDF file system



    "Rick" wrote:

    > Are you trying to perform an update from Win XP
    > by running the setup program? If so, that's why
    > you get the error. The DVD is formatted in UDF.
    > That's the standard for DVDs and Win XP does
    > not have native support for UDF.
    >
    > Boot from the DVD and you won't get that error.
    > But you're advised to install Vista on a
    > separate partition or hard drive. You may
    > encounter problems with your Win XP, especially
    > if you install to a partition on the same hard
    > drive as XP. The safest thing to do is to
    > disable you Win XP hard drive when you install
    > Vista and put Vista on a separate hard drive.
    > If you "update" XP, make sure you have a full
    > back of your Win XP system that you can use to
    > restore your XP to the state it was. You will
    > have to completely clean the hard drive to
    > replace Vista!
    >
    >
    > sseligson wrote:
    > > Just got the DVD directly in the mail from microsoft. I want to install vista.
    > >
    > > On my home built machine with an asrock 939MB and a a opteron 939 I got this
    > > message
    > >
    > > This disc contains a "UDF" file system and requires an operating system
    > > that supports the ISO-13346 "UDF" file system specification.
    > >
    > > Tried it on my dell and it autoladed without a problem. Can't figure out
    > > what this message means. Please help with this one.

    >


      My System SpecsSystem Spec

  5. #4


    sseligson Guest

    Re: UDF file system

    Rick, Why then does this auto load on my dell computer? makes no sense.

    "Rick" wrote:

    > Are you trying to perform an update from Win XP
    > by running the setup program? If so, that's why
    > you get the error. The DVD is formatted in UDF.
    > That's the standard for DVDs and Win XP does
    > not have native support for UDF.
    >
    > Boot from the DVD and you won't get that error.
    > But you're advised to install Vista on a
    > separate partition or hard drive. You may
    > encounter problems with your Win XP, especially
    > if you install to a partition on the same hard
    > drive as XP. The safest thing to do is to
    > disable you Win XP hard drive when you install
    > Vista and put Vista on a separate hard drive.
    > If you "update" XP, make sure you have a full
    > back of your Win XP system that you can use to
    > restore your XP to the state it was. You will
    > have to completely clean the hard drive to
    > replace Vista!
    >
    >
    > sseligson wrote:
    > > Just got the DVD directly in the mail from microsoft. I want to install vista.
    > >
    > > On my home built machine with an asrock 939MB and a a opteron 939 I got this
    > > message
    > >
    > > This disc contains a "UDF" file system and requires an operating system
    > > that supports the ISO-13346 "UDF" file system specification.
    > >
    > > Tried it on my dell and it autoladed without a problem. Can't figure out
    > > what this message means. Please help with this one.

    >


      My System SpecsSystem Spec

  6. #5


    Rick Guest

    Re: UDF file system

    Because the boot section of the DVD is not
    related to the format of the data section. The
    boot section of the DVD will load the necessary
    software interface to read the UDF file system.
    It makes perfect sense if you're knowledgeable
    of the technicalities and how a bootable CD or
    DVD works. Otherwise, all you have to
    comprehend is that it works. You don't have to
    know how or why if you aren't interested.


    sseligson wrote:
    > Rick, Why then does this auto load on my dell computer? makes no sense.
    >
    > "Rick" wrote:
    >
    >> Are you trying to perform an update from Win XP
    >> by running the setup program? If so, that's why
    >> you get the error. The DVD is formatted in UDF.
    >> That's the standard for DVDs and Win XP does
    >> not have native support for UDF.
    >>
    >> Boot from the DVD and you won't get that error.
    >> But you're advised to install Vista on a
    >> separate partition or hard drive. You may
    >> encounter problems with your Win XP, especially
    >> if you install to a partition on the same hard
    >> drive as XP. The safest thing to do is to
    >> disable you Win XP hard drive when you install
    >> Vista and put Vista on a separate hard drive.
    >> If you "update" XP, make sure you have a full
    >> back of your Win XP system that you can use to
    >> restore your XP to the state it was. You will
    >> have to completely clean the hard drive to
    >> replace Vista!
    >>
    >>
    >> sseligson wrote:
    >>> Just got the DVD directly in the mail from microsoft. I want to install vista.
    >>>
    >>> On my home built machine with an asrock 939MB and a a opteron 939 I got this
    >>> message
    >>>
    >>> This disc contains a "UDF" file system and requires an operating system
    >>> that supports the ISO-13346 "UDF" file system specification.
    >>>
    >>> Tried it on my dell and it autoladed without a problem. Can't figure out
    >>> what this message means. Please help with this one.


      My System SpecsSystem Spec

  7. #6


    AJR Guest

    Re: UDF file system

    You did not mention OS being used or Vista version - the Opteron may be the
    culprit although AMD states it is Vista capable.
    In any case do not "upgrade" XP - witness the numerous posts re: "getting my
    XP back". Installing Vista from within XP to another HD creates a dual boot
    scenario.

    "sseligson" <sseligson@discussions.microsoft.com> wrote in message
    news6496567-3F41-442D-8FA6-84A3259C50E0@microsoft.com...
    > Rick, Why then does this auto load on my dell computer? makes no sense.
    >
    > "Rick" wrote:
    >
    >> Are you trying to perform an update from Win XP
    >> by running the setup program? If so, that's why
    >> you get the error. The DVD is formatted in UDF.
    >> That's the standard for DVDs and Win XP does
    >> not have native support for UDF.
    >>
    >> Boot from the DVD and you won't get that error.
    >> But you're advised to install Vista on a
    >> separate partition or hard drive. You may
    >> encounter problems with your Win XP, especially
    >> if you install to a partition on the same hard
    >> drive as XP. The safest thing to do is to
    >> disable you Win XP hard drive when you install
    >> Vista and put Vista on a separate hard drive.
    >> If you "update" XP, make sure you have a full
    >> back of your Win XP system that you can use to
    >> restore your XP to the state it was. You will
    >> have to completely clean the hard drive to
    >> replace Vista!
    >>
    >>
    >> sseligson wrote:
    >> > Just got the DVD directly in the mail from microsoft. I want to
    >> > install vista.
    >> >
    >> > On my home built machine with an asrock 939MB and a a opteron 939 I got
    >> > this
    >> > message
    >> >
    >> > This disc contains a "UDF" file system and requires an operating system
    >> > that supports the ISO-13346 "UDF" file system specification.
    >> >
    >> > Tried it on my dell and it autoladed without a problem. Can't figure
    >> > out
    >> > what this message means. Please help with this one.

    >>




      My System SpecsSystem Spec

  8. #7


    Rick Guest

    Re: UDF file system

    The CPU has absolutely no affect on the DVD file
    system format. Technically there is no
    difference between an Opteron and an Athlon 64,
    or even the FX. The all have the same guts in
    the CPU, the only difference is the cache and
    the QA/QC certification of the Opteron.


    AJR wrote:
    > You did not mention OS being used or Vista version - the Opteron may be the
    > culprit although AMD states it is Vista capable.
    > In any case do not "upgrade" XP - witness the numerous posts re: "getting my
    > XP back". Installing Vista from within XP to another HD creates a dual boot
    > scenario.
    >
    > "sseligson" <sseligson@discussions.microsoft.com> wrote in message
    > news6496567-3F41-442D-8FA6-84A3259C50E0@microsoft.com...
    >> Rick, Why then does this auto load on my dell computer? makes no sense.
    >>
    >> "Rick" wrote:
    >>
    >>> Are you trying to perform an update from Win XP
    >>> by running the setup program? If so, that's why
    >>> you get the error. The DVD is formatted in UDF.
    >>> That's the standard for DVDs and Win XP does
    >>> not have native support for UDF.
    >>>
    >>> Boot from the DVD and you won't get that error.
    >>> But you're advised to install Vista on a
    >>> separate partition or hard drive. You may
    >>> encounter problems with your Win XP, especially
    >>> if you install to a partition on the same hard
    >>> drive as XP. The safest thing to do is to
    >>> disable you Win XP hard drive when you install
    >>> Vista and put Vista on a separate hard drive.
    >>> If you "update" XP, make sure you have a full
    >>> back of your Win XP system that you can use to
    >>> restore your XP to the state it was. You will
    >>> have to completely clean the hard drive to
    >>> replace Vista!
    >>>
    >>>
    >>> sseligson wrote:
    >>>> Just got the DVD directly in the mail from microsoft. I want to
    >>>> install vista.
    >>>>
    >>>> On my home built machine with an asrock 939MB and a a opteron 939 I got
    >>>> this
    >>>> message
    >>>>
    >>>> This disc contains a "UDF" file system and requires an operating system
    >>>> that supports the ISO-13346 "UDF" file system specification.
    >>>>
    >>>> Tried it on my dell and it autoladed without a problem. Can't figure
    >>>> out
    >>>> what this message means. Please help with this one.

    >
    >


      My System SpecsSystem Spec


UDF file system

Similar Threads
Thread Forum
where is registry file in the file system Server General
File System - XP,Vista - File Redirector - Download Vista file management
43 GB System File in System Volume Information on 160 GB partition Vista General
missing live file system and mastered system Vista General
WinFX Feb CTP - SvcUtil throws file not found exception for assembly file System.Runtime.Serialization, Version 3.0.0.0 Indigo