![]() |
![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() |
| Welcome to Windows Vista Forums. Our forum is dedicated to helping you find solutions with any problems, errors or issues you are experiencing with Windows Vista. The Vista forum also covers news and updates and has an extensive Windows Vista tutorial section that covers a wide range of tips and tricks. |
| |||||||
![]() |
| |
| | #1 (permalink) |
| Guest | windows mail error I have been getting the below error from another email on another login on the same PC the setup STMP and POP3 work on a seperate PC but when I try seeting up the same setting on the same PC I have two logins I get this mesage; The connection to the server has failed. Account: 'Colleen', Server: 'xxxxxxxx.yourwebhosting.com', Protocol: POP3, Port: 110, Secure(SSL): No, Socket Error: 10061, Error Number: 0x800CCC0E I have readt through this string and have tried most things listed I do have Norton system works 2009 I have tried with it installed and uninstalled as well. I am out of ideas??????? I have tried port 25 (which works on another PC) but on this one it doesn't. I have tried port 587 not working either. anyhelp would be greatly appreciated |
My System Specs![]() |
| | #2 (permalink) |
| Guest | Re: windows mail error I assume your problem is with receiving, since the error message you supplied pertains to receiving. Ports 25 and 587 do not affect receiving, since they are for sending. The error message is difficult to evaluate since you X'd out part of the server name. Perhaps the error is in the 'xxxxxxxx' part of the server name. -- Gary VanderMolen, MS-MVP (Mail) "bbell121" <bbell121@xxxxxx> wrote in message news:C221B785-112D-4092-886B-15EEAD183DD4@xxxxxx Quote: >I have been getting the below error from another email on another login on > the same PC the setup STMP and POP3 work on a seperate PC but when I try > seeting up the same setting on the same PC I have two logins I get this > mesage; > > The connection to the server has failed. Account: 'Colleen', Server: > 'xxxxxxxx.yourwebhosting.com', Protocol: POP3, Port: 110, Secure(SSL): No, > Socket Error: 10061, Error Number: 0x800CCC0E > > I have readt through this string and have tried most things listed > I do have Norton system works 2009 I have tried with it installed and > uninstalled as well. > > I am out of ideas??????? > > I have tried port 25 (which works on another PC) but on this one it doesn't. > I have tried port 587 not working either. > > anyhelp would be greatly appreciated |
My System Specs![]() |
| | #3 (permalink) |
| Guest | Re: windows mail error The connection to the server has failed. Account: 'pop', Server: 'pop.broadband.rogers.com', Protocol: POP3, Port: 110, Secure(SSL): No, Socket Error: 10061, Error Number: 0x800CCC0E I keep getting the same error and cant figure out what to do about it. "Gary VanderMolen" wrote: Quote: > I assume your problem is with receiving, since the error message you > supplied pertains to receiving. > Ports 25 and 587 do not affect receiving, since they are for sending. > > The error message is difficult to evaluate since you X'd out part of > the server name. Perhaps the error is in the 'xxxxxxxx' part of the > server name. > -- > Gary VanderMolen, MS-MVP (Mail) > > > "bbell121" <bbell121@xxxxxx> wrote in message news:C221B785-112D-4092-886B-15EEAD183DD4@xxxxxx Quote: > >I have been getting the below error from another email on another login on > > the same PC the setup STMP and POP3 work on a seperate PC but when I try > > seeting up the same setting on the same PC I have two logins I get this > > mesage; > > > > The connection to the server has failed. Account: 'Colleen', Server: > > 'xxxxxxxx.yourwebhosting.com', Protocol: POP3, Port: 110, Secure(SSL): No, > > Socket Error: 10061, Error Number: 0x800CCC0E > > > > I have readt through this string and have tried most things listed > > I do have Norton system works 2009 I have tried with it installed and > > uninstalled as well. > > > > I am out of ideas??????? > > > > I have tried port 25 (which works on another PC) but on this one it doesn't. > > I have tried port 587 not working either. > > > > anyhelp would be greatly appreciated > > |
My System Specs![]() |
| | #4 (permalink) |
| Guest | Re: windows mail error Your settings are fine. That type of error is usually caused by interference from a non- compatible antivirus program. Which antivirus are you running? As a minimum, email scanning in the antivirus must be turned off, although that may not be sufficient to eliminate all bad effects. In a worst case scenario, your antivirus may need to be uninstalled. If turning off your antivirus email scanning function does not resolve your problem, consider upgrading to Windows Live Mail, because it is less prone to suffering bad effects from overly intrusive antivirus programs: http://get.live.com/wlmail/overview Email scanning in any antivirus must be disabled, for reasons explained here: http://thundercloud.net/infoave/tuto...ning/index.htm -- Gary VanderMolen, MS-MVP (Mail) "atomblin" <atomblin@xxxxxx> wrote in message news:84AD3889-5CCF-4EC1-8078-5D1EB108806B@xxxxxx Quote: > The connection to the server has failed. Account: 'pop', Server: > 'pop.broadband.rogers.com', Protocol: POP3, Port: 110, Secure(SSL): No, > Socket Error: 10061, Error Number: 0x800CCC0E > I keep getting the same error and cant figure out what to do about it. > > "Gary VanderMolen" wrote: > Quote: >> I assume your problem is with receiving, since the error message you >> supplied pertains to receiving. >> Ports 25 and 587 do not affect receiving, since they are for sending. >> >> The error message is difficult to evaluate since you X'd out part of >> the server name. Perhaps the error is in the 'xxxxxxxx' part of the >> server name. >> -- >> Gary VanderMolen, MS-MVP (Mail) >> >> >> "bbell121" <bbell121@xxxxxx> wrote in message news:C221B785-112D-4092-886B-15EEAD183DD4@xxxxxx Quote: >> >I have been getting the below error from another email on another login on >> > the same PC the setup STMP and POP3 work on a seperate PC but when I try >> > seeting up the same setting on the same PC I have two logins I get this >> > mesage; >> > >> > The connection to the server has failed. Account: 'Colleen', Server: >> > 'xxxxxxxx.yourwebhosting.com', Protocol: POP3, Port: 110, Secure(SSL): No, >> > Socket Error: 10061, Error Number: 0x800CCC0E >> > >> > I have readt through this string and have tried most things listed >> > I do have Norton system works 2009 I have tried with it installed and >> > uninstalled as well. >> > >> > I am out of ideas??????? >> > >> > I have tried port 25 (which works on another PC) but on this one it doesn't. >> > I have tried port 587 not working either. >> > >> > anyhelp would be greatly appreciated >> >> |
My System Specs![]() |
| | #5 (permalink) |
| Guest | Re: windows mail error Gary thank you for replying, I xed out the server in there. I have since worked it out on my own, My provider was migrating to a new server and they didn't even know what to tell since i was using windows mail. what I ended up doing was the SMTP and POP ended up being a totally different address. again thank you though. "Gary VanderMolen" wrote: Quote: > Your settings are fine. > That type of error is usually caused by interference from a non- > compatible antivirus program. Which antivirus are you running? > As a minimum, email scanning in the antivirus must be turned off, > although that may not be sufficient to eliminate all bad effects. > In a worst case scenario, your antivirus may need to be uninstalled. > > If turning off your antivirus email scanning function does not resolve > your problem, consider upgrading to Windows Live Mail, because it > is less prone to suffering bad effects from overly intrusive antivirus > programs: http://get.live.com/wlmail/overview > > Email scanning in any antivirus must be disabled, for reasons > explained here: > http://thundercloud.net/infoave/tuto...ning/index.htm > > -- > Gary VanderMolen, MS-MVP (Mail) > > > "atomblin" <atomblin@xxxxxx> wrote in message news:84AD3889-5CCF-4EC1-8078-5D1EB108806B@xxxxxx Quote: > > The connection to the server has failed. Account: 'pop', Server: > > 'pop.broadband.rogers.com', Protocol: POP3, Port: 110, Secure(SSL): No, > > Socket Error: 10061, Error Number: 0x800CCC0E > > I keep getting the same error and cant figure out what to do about it. > > > > "Gary VanderMolen" wrote: > > Quote: > >> I assume your problem is with receiving, since the error message you > >> supplied pertains to receiving. > >> Ports 25 and 587 do not affect receiving, since they are for sending. > >> > >> The error message is difficult to evaluate since you X'd out part of > >> the server name. Perhaps the error is in the 'xxxxxxxx' part of the > >> server name. > >> -- > >> Gary VanderMolen, MS-MVP (Mail) > >> > >> > >> "bbell121" <bbell121@xxxxxx> wrote in message news:C221B785-112D-4092-886B-15EEAD183DD4@xxxxxx > >> >I have been getting the below error from another email on another login on > >> > the same PC the setup STMP and POP3 work on a seperate PC but when I try > >> > seeting up the same setting on the same PC I have two logins I get this > >> > mesage; > >> > > >> > The connection to the server has failed. Account: 'Colleen', Server: > >> > 'xxxxxxxx.yourwebhosting.com', Protocol: POP3, Port: 110, Secure(SSL): No, > >> > Socket Error: 10061, Error Number: 0x800CCC0E > >> > > >> > I have readt through this string and have tried most things listed > >> > I do have Norton system works 2009 I have tried with it installed and > >> > uninstalled as well. > >> > > >> > I am out of ideas??????? > >> > > >> > I have tried port 25 (which works on another PC) but on this one it doesn't. > >> > I have tried port 587 not working either. > >> > > >> > anyhelp would be greatly appreciated > >> > >> > >> > > |
My System Specs![]() |
| | #6 (permalink) |
| Guest | Re: windows mail error You're very welcome. Thanks for reporting back. -- Gary VanderMolen, MS-MVP (Mail) "bbell121" <bbell121@xxxxxx> wrote in message news:906E9865-E8AA-43FE-8952-D7D30DF125B1@xxxxxx Quote: > Gary thank you for replying, I xed out the server in there. I have since > worked it out on my own, My provider was migrating to a new server and they > didn't even know what to tell since i was using windows mail. what I ended up > doing was the SMTP and POP ended up being a totally different address. > > again thank you though. > Quote: Quote: >> > "Gary VanderMolen" wrote: >> > >> >> I assume your problem is with receiving, since the error message you >> >> supplied pertains to receiving. >> >> Ports 25 and 587 do not affect receiving, since they are for sending. >> >> >> >> The error message is difficult to evaluate since you X'd out part of >> >> the server name. Perhaps the error is in the 'xxxxxxxx' part of the >> >> server name. >> >> -- >> >> Gary VanderMolen, MS-MVP (Mail) >> >> >> >> >> >> "bbell121" <bbell121@xxxxxx> wrote in message news:C221B785-112D-4092-886B-15EEAD183DD4@xxxxxx >> >> >I have been getting the below error from another email on another login on >> >> > the same PC the setup STMP and POP3 work on a seperate PC but when I try >> >> > seeting up the same setting on the same PC I have two logins I get this >> >> > mesage; >> >> > >> >> > The connection to the server has failed. Account: 'Colleen', Server: >> >> > 'xxxxxxxx.yourwebhosting.com', Protocol: POP3, Port: 110, Secure(SSL): No, >> >> > Socket Error: 10061, Error Number: 0x800CCC0E >> >> > >> >> > I have readt through this string and have tried most things listed >> >> > I do have Norton system works 2009 I have tried with it installed and >> >> > uninstalled as well. >> >> > >> >> > I am out of ideas??????? >> >> > >> >> > I have tried port 25 (which works on another PC) but on this one it doesn't. >> >> > I have tried port 587 not working either. >> >> > >> >> > anyhelp would be greatly appreciated |
My System Specs![]() |
| | #7 (permalink) |
| Guest | Re: windows mail error "bbell121" <bbell121@xxxxxx> escribió en el mensaje de noticias:C221B785-112D-4092-886B-15EEAD183DD4@xxxxxx Quote: > I have been getting the below error from another email on another login on > the same PC the setup STMP and POP3 work on a seperate PC but when I try > seeting up the same setting on the same PC I have two logins I get this > mesage; > > The connection to the server has failed. Account: 'Colleen', Server: > 'xxxxxxxx.yourwebhosting.com', Protocol: POP3, Port: 110, Secure(SSL): No, > Socket Error: 10061, Error Number: 0x800CCC0E > > I have readt through this string and have tried most things listed > I do have Norton system works 2009 I have tried with it installed and > uninstalled as well. > > I am out of ideas??????? > > I have tried port 25 (which works on another PC) but on this one it > doesn't. > I have tried port 587 not working either. > > anyhelp would be greatly appreciated |
My System Specs![]() |
![]() |
| Thread Tools | |
| |
Similar Threads | ||||
| Thread | Forum | |||
| Windows mail - CAN'T RSEND MAIL!! Error message - 0x800CC0F | Vista mail | |||
| Automatically receive e-mail and error message Windows Mail | Browsers & Mail | |||
| Help with windows vista mail, Socket Error: 10053, Error Number: 0x800CCC0F | Vista mail | |||
| Error sending E-mail with Windows Vista and Windoes Mail | Vista mail | |||
| windows live mail 2008 (Build 12.0.1606) error report error | Windows Live | |||