![]() |
![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() |
| Welcome to Windows Vista Forums. Our forum is dedicated to helping you find solutions with any problems, errors or issues you are experiencing with Windows Vista. The Vista forum also covers news and updates and has an extensive Windows Vista tutorial section that covers a wide range of tips and tricks. |
| |||||||
![]() |
| |
| | #1 (permalink) |
| | for gary vandermolen re vista mail gary for some reason my original post dissapeared. here it is again and you had asked for thr exact error msg it follows. the name is changed but eveything else is as written. i can send mail too all my contacts but one the email is nottheright.begining@xxxxxx mail tells me that it cant sned it because the addy does not exsist. it tells me to check my security setting, which are obviously fine since the other contacts can get the mail. i can send to this address useing webmail with the same smtp server as is in my mail set up. the address in this email is correct except for the first part. there is a period in the email between first and last names. yes, i have tried it without. rick The message could not be sent. The authentication setting might not be correct for your outgoing e-mail [SMTP] server. For help solving this problem, go to Help, search for "Troubleshoot Windows Mail", and read the "I'm having problems sending e-mail" section. If you need help determining the proper server settings, please contact your e-mail service provider. The rejected e-mail address was 'first.last@xxxxxx'. Subject '', Account: 'pop.cogeco.ca', Server: 'smtp.cogeco.ca', Protocol: SMTP, Server Response: '554 <first.last@xxxxxx>: Relay access denied', Port: 25, Secure(SSL): No, Server Error: 554, Error Number: 0x800CCC79 |
My System Specs![]() |
| | #2 (permalink) |
| | Re: for gary vandermolen re vista mail Now that I have the full error message, the picture is becoming clearer. The pertinent part is "Relay access denied." The SMTP server you were sending from does not belong to the network you were connecting from: computan.on.ca. The general rule for port 25 SMTP is that the SMTP server must belong to the same network as the one that connects you to the Internet. Gary VanderMolen "rick andres" <here@xxxxxx> wrote in message news:#Qkkid79HHA.1416@xxxxxx Quote: > gary for some reason my original post dissapeared. here it is again and you had asked for thr exact error msg it follows. the > name is changed but eveything else is as written. > > > i can send mail too all my contacts but one the email is > nottheright.begining@xxxxxx > mail tells me that it cant sned it because the addy does not exsist. it > tells me to check my security setting, which are obviously fine since the > other contacts can get the mail. i can send to this address useing webmail > with the same smtp server as is in my mail set up. the address in this email > is correct except for the first part. there is a period in the email between > first and last names. yes, i have tried it without. > > rick > > > The message could not be sent. The authentication setting might not be correct for your outgoing e-mail [SMTP] server. For help > solving this problem, go to Help, search for "Troubleshoot Windows Mail", and read the "I'm having problems sending e-mail" > section. If you need help determining the proper server settings, please contact your e-mail service provider. > > The rejected e-mail address was 'first.last@xxxxxx'. Subject '', Account: 'pop.cogeco.ca', Server: 'smtp.cogeco.ca', > Protocol: SMTP, Server Response: '554 <first.last@xxxxxx>: Relay access denied', Port: 25, Secure(SSL): No, Server > Error: 554, Error Number: 0x800CCC79 |
My System Specs![]() |
| | #3 (permalink) |
| | Re: for gary vandermolen re vista mail why then can i send other emails. i've figured out that i can not send to ".on.ca" addresses. also when i connect to web mail through computan to the other isps webmail website i can send to any address. "Gary VanderMolen" <gary@xxxxxx> wrote in message news:OLhaXd99HHA.748@xxxxxx Quote: > Now that I have the full error message, the picture is becoming > clearer. The pertinent part is "Relay access denied." > The SMTP server you were sending from does not belong to the > network you were connecting from: computan.on.ca. > The general rule for port 25 SMTP is that the SMTP server must > belong to the same network as the one that connects you to the > Internet. > > Gary VanderMolen > > > "rick andres" <here@xxxxxx> wrote in message > news:#Qkkid79HHA.1416@xxxxxx Quote: >> gary for some reason my original post dissapeared. here it is again and >> you had asked for thr exact error msg it follows. the name is changed but >> eveything else is as written. >> >> >> i can send mail too all my contacts but one the email is >> nottheright.begining@xxxxxx >> mail tells me that it cant sned it because the addy does not exsist. it >> tells me to check my security setting, which are obviously fine since the >> other contacts can get the mail. i can send to this address useing >> webmail >> with the same smtp server as is in my mail set up. the address in this >> is correct except for the first part. there is a period in the email >> between >> first and last names. yes, i have tried it without. >> >> rick >> >> >> The message could not be sent. The authentication setting might not be >> correct for your outgoing e-mail [SMTP] server. For help solving this >> problem, go to Help, search for "Troubleshoot Windows Mail", and read the >> "I'm having problems sending e-mail" section. If you need help >> determining the proper server settings, please contact your e-mail >> service provider. >> >> The rejected e-mail address was 'first.last@xxxxxx'. Subject '', >> Account: 'pop.cogeco.ca', Server: 'smtp.cogeco.ca', Protocol: SMTP, >> Server Response: '554 <first.last@xxxxxx>: Relay access denied', >> Port: 25, Secure(SSL): No, Server Error: 554, Error Number: 0x800CCC79 > > |
My System Specs![]() |
| | #4 (permalink) |
| | Re: for gary vandermolen re vista mail Webmail does not use the port 25 SMTP protocol, so it is not affected. Besides webmail, your other two workarounds are: 1. Use the computan SMTP server, or 2. Get a free account with Gmail, configure it for POP access, then use it for your sending chores. Gmail SMTP doesn't use port 25. Gary VanderMolen "rick andres" <here@xxxxxx> wrote in message news:eXJG0E#9HHA.464@xxxxxx Quote: > why then can i send other emails. > i've figured out that i can not send to ".on.ca" addresses. also when i connect to web mail through computan to the other isps > webmail website i can send to any address. > > "Gary VanderMolen" <gary@xxxxxx> wrote in message news:OLhaXd99HHA.748@xxxxxx Quote: >> Now that I have the full error message, the picture is becoming >> clearer. The pertinent part is "Relay access denied." >> The SMTP server you were sending from does not belong to the >> network you were connecting from: computan.on.ca. >> The general rule for port 25 SMTP is that the SMTP server must >> belong to the same network as the one that connects you to the >> Internet. >> >> Gary VanderMolen >> >> >> "rick andres" <here@xxxxxx> wrote in message news:#Qkkid79HHA.1416@xxxxxx Quote: >>> gary for some reason my original post dissapeared. here it is again and you had asked for thr exact error msg it follows. the >>> name is changed but eveything else is as written. >>> >>> >>> i can send mail too all my contacts but one the email is >>> nottheright.begining@xxxxxx >>> mail tells me that it cant sned it because the addy does not exsist. it >>> tells me to check my security setting, which are obviously fine since the >>> other contacts can get the mail. i can send to this address useing webmail >>> with the same smtp server as is in my mail set up. the address in this email >>> is correct except for the first part. there is a period in the email between >>> first and last names. yes, i have tried it without. >>> >>> rick >>> >>> >>> The message could not be sent. The authentication setting might not be correct for your outgoing e-mail [SMTP] server. For >>> help solving this problem, go to Help, search for "Troubleshoot Windows Mail", and read the "I'm having problems sending >>> e-mail" section. If you need help determining the proper server settings, please contact your e-mail service provider. >>> >>> The rejected e-mail address was 'first.last@xxxxxx'. Subject '', Account: 'pop.cogeco.ca', Server: 'smtp.cogeco.ca', >>> Protocol: SMTP, Server Response: '554 <first.last@xxxxxx>: Relay access denied', Port: 25, Secure(SSL): No, Server >>> Error: 554, Error Number: 0x800CCC79 >> >> |
My System Specs![]() |
| | #5 (permalink) |
| | Re: for gary vandermolen re vista mail both accounts are set to port 25 though. so it shouldn;t make a differnce. i just cant send ".on.ca" throughn the cogeco one using vista mail. but i can through the computan account trouh vista mail "Gary VanderMolen" <gary@xxxxxx> wrote in message news:%23$G8V$%239HHA.600@xxxxxx Quote: > Webmail does not use the port 25 SMTP protocol, so it is not > affected. > > Besides webmail, your other two workarounds are: > 1. Use the computan SMTP server, or > 2. Get a free account with Gmail, configure it for POP access, > then use it for your sending chores. Gmail SMTP doesn't use > port 25. > > Gary VanderMolen > > > "rick andres" <here@xxxxxx> wrote in message > news:eXJG0E#9HHA.464@xxxxxx Quote: >> why then can i send other emails. >> i've figured out that i can not send to ".on.ca" addresses. also when i >> connect to web mail through computan to the other isps webmail website i >> can send to any address. >> >> "Gary VanderMolen" <gary@xxxxxx> wrote in message >> news:OLhaXd99HHA.748@xxxxxx Quote: >>> Now that I have the full error message, the picture is becoming >>> clearer. The pertinent part is "Relay access denied." >>> The SMTP server you were sending from does not belong to the >>> network you were connecting from: computan.on.ca. >>> The general rule for port 25 SMTP is that the SMTP server must >>> belong to the same network as the one that connects you to the >>> Internet. >>> >>> Gary VanderMolen >>> >>> >>> "rick andres" <here@xxxxxx> wrote in message >>> news:#Qkkid79HHA.1416@xxxxxx >>>> gary for some reason my original post dissapeared. here it is again and >>>> you had asked for thr exact error msg it follows. the name is changed >>>> but eveything else is as written. >>>> >>>> >>>> i can send mail too all my contacts but one the email is >>>> nottheright.begining@xxxxxx >>>> mail tells me that it cant sned it because the addy does not exsist. it >>>> tells me to check my security setting, which are obviously fine since >>>> the >>>> other contacts can get the mail. i can send to this address useing >>>> webmail >>>> with the same smtp server as is in my mail set up. the address in this >>>> is correct except for the first part. there is a period in the email >>>> between >>>> first and last names. yes, i have tried it without. >>>> >>>> rick >>>> >>>> >>>> The message could not be sent. The authentication setting might not be >>>> correct for your outgoing e-mail [SMTP] server. For help solving this >>>> problem, go to Help, search for "Troubleshoot Windows Mail", and read >>>> the "I'm having problems sending e-mail" section. If you need help >>>> determining the proper server settings, please contact your e-mail >>>> service provider. >>>> >>>> The rejected e-mail address was 'first.last@xxxxxx'. Subject >>>> '', Account: 'pop.cogeco.ca', Server: 'smtp.cogeco.ca', Protocol: SMTP, >>>> Server Response: '554 <first.last@xxxxxx>: Relay access >>>> denied', Port: 25, Secure(SSL): No, Server Error: 554, Error Number: >>>> 0x800CCC79 >>> >>> >>> |
My System Specs![]() |
| | #6 (permalink) |
| | Re: for gary vandermolen re vista mail While you are getting your Internet connection from Computan, Computan is not going to block any of your usage of the Computan SMTP server. But as you saw in the error message below, while connected to Computan, Cogeco will block at least some of your usage of the Cogeco SMTP server. Different ISP's will implement some of these conventions somewhat differently. Gary VanderMolen "rick andres" <here@xxxxxx> wrote in message news:#4MgekB#HHA.700@xxxxxx Quote: > both accounts are set to port 25 though. so it shouldn;t make a differnce. i just cant send ".on.ca" throughn the cogeco one > using vista mail. but i can through the computan account trouh vista mail > "Gary VanderMolen" <gary@xxxxxx> wrote in message news:%23$G8V$%239HHA.600@xxxxxx Quote: >> Webmail does not use the port 25 SMTP protocol, so it is not >> affected. >> >> Besides webmail, your other two workarounds are: >> 1. Use the computan SMTP server, or >> 2. Get a free account with Gmail, configure it for POP access, >> then use it for your sending chores. Gmail SMTP doesn't use >> port 25. >> >> Gary VanderMolen >> >> >> "rick andres" <here@xxxxxx> wrote in message news:eXJG0E#9HHA.464@xxxxxx Quote: >>> why then can i send other emails. >>> i've figured out that i can not send to ".on.ca" addresses. also when i connect to web mail through computan to the other isps >>> webmail website i can send to any address. >>> >>> "Gary VanderMolen" <gary@xxxxxx> wrote in message news:OLhaXd99HHA.748@xxxxxx >>>> Now that I have the full error message, the picture is becoming >>>> clearer. The pertinent part is "Relay access denied." >>>> The SMTP server you were sending from does not belong to the >>>> network you were connecting from: computan.on.ca. >>>> The general rule for port 25 SMTP is that the SMTP server must >>>> belong to the same network as the one that connects you to the >>>> Internet. >>>> >>>> Gary VanderMolen >>>> >>>> >>>> "rick andres" <here@xxxxxx> wrote in message news:#Qkkid79HHA.1416@xxxxxx >>>>> gary for some reason my original post dissapeared. here it is again and you had asked for thr exact error msg it follows. >>>>> the name is changed but eveything else is as written. >>>>> >>>>> >>>>> i can send mail too all my contacts but one the email is >>>>> nottheright.begining@xxxxxx >>>>> mail tells me that it cant sned it because the addy does not exsist. it >>>>> tells me to check my security setting, which are obviously fine since the >>>>> other contacts can get the mail. i can send to this address useing webmail >>>>> with the same smtp server as is in my mail set up. the address in this email >>>>> is correct except for the first part. there is a period in the email between >>>>> first and last names. yes, i have tried it without. >>>>> >>>>> rick >>>>> >>>>> >>>>> The message could not be sent. The authentication setting might not be correct for your outgoing e-mail [SMTP] server. For >>>>> help solving this problem, go to Help, search for "Troubleshoot Windows Mail", and read the "I'm having problems sending >>>>> e-mail" section. If you need help determining the proper server settings, please contact your e-mail service provider. >>>>> >>>>> The rejected e-mail address was 'first.last@xxxxxx'. Subject '', Account: 'pop.cogeco.ca', Server: 'smtp.cogeco.ca', >>>>> Protocol: SMTP, Server Response: '554 <first.last@xxxxxx>: Relay access denied', Port: 25, Secure(SSL): No, Server >>>>> Error: 554, Error Number: 0x800CCC79 |
My System Specs![]() |
![]() |
| Thread Tools | |
| |
Similar Threads | ||||
| Thread | Forum | |||
| Gary VanderMolen | Live Mail | |||
| Gary VanderMolen, THANK YOU! | Vista mail | |||
| TY Gary VanderMolen | Vista mail | |||
| Gary VanderMolen | Vista mail | |||
| FAO Gary VanderMolen | Vista mail | |||