card worked fine in xp but since clean install to Vista no hardware sound
option in menu of pvr software. Have tried several different pvr softwares
no option for sound other than output lines, need aux or cd in . Installed
latest ac97 drivers and no help all drivers bios etc... updated. Even bought
sb audigy card and plugged card sound output to sb card and still no option
in any software. Vista drivers for audigy also installed. uninstall mobo
sound first of course. Tech support at leadtek.com has said problem results
from Vista resoursing software programs instead of hardware. TV card is
recommended on Vista site certified and all that.
leadtek TV2000 xp expert rm with vista driver. Media center wont detect
card but am told that is result of crossbar use by leadtek. Have uninstalled
tv card and sb card repeatedly but no good.

"Not a Vista Fan" <NotaVistaFan@discussions.microsoft.com> wrote in message
news:114592E6-FDD3-4295-82A9-B14198C5F191@microsoft.com...
> card worked fine in xp but since clean install to Vista no hardware sound
> option in menu of pvr software. Have tried several different pvr
> softwares
> no option for sound other than output lines, need aux or cd in .
> Installed
> latest ac97 drivers and no help all drivers bios etc... updated. Even
> bought
> sb audigy card and plugged card sound output to sb card and still no
> option
> in any software. Vista drivers for audigy also installed. uninstall mobo
> sound first of course. Tech support at leadtek.com has said problem
> results
> from Vista resoursing software programs instead of hardware. TV card is
> recommended on Vista site certified and all that.
> leadtek TV2000 xp expert rm with vista driver. Media center wont detect
> card but am told that is result of crossbar use by leadtek. Have
> uninstalled
> tv card and sb card repeatedly but no good.


Did you use the Vista driver? And remember, it is 32bit only.
ftp://ftp1.leadtek.com/tv_tuner/TV20...3-20061128.zip
Also, you might want to use the latest PVR software. Not sure if it works in
Vista, but if not you might want to check out BeyondTV 4.6
http://www.snapstream.com/download/b.../Download2.asp Again, only for
32 bit Vista.

Yes as i mentioned all Vista whql drivers for all hardware available or
newest beta drivers. and i did try beyond tv, it didnt detect recording
device either.

"Wayne Wastier" wrote:

> "Not a Vista Fan" <NotaVistaFan@discussions.microsoft.com> wrote in message
> news:114592E6-FDD3-4295-82A9-B14198C5F191@microsoft.com...
> > card worked fine in xp but since clean install to Vista no hardware sound
> > option in menu of pvr software. Have tried several different pvr
> > softwares
> > no option for sound other than output lines, need aux or cd in .
> > Installed
> > latest ac97 drivers and no help all drivers bios etc... updated. Even
> > bought
> > sb audigy card and plugged card sound output to sb card and still no
> > option
> > in any software. Vista drivers for audigy also installed. uninstall mobo
> > sound first of course. Tech support at leadtek.com has said problem
> > results
> > from Vista resoursing software programs instead of hardware. TV card is
> > recommended on Vista site certified and all that.
> > leadtek TV2000 xp expert rm with vista driver. Media center wont detect
> > card but am told that is result of crossbar use by leadtek. Have
> > uninstalled
> > tv card and sb card repeatedly but no good.
>
>
> Did you use the Vista driver? And remember, it is 32bit only.
> ftp://ftp1.leadtek.com/tv_tuner/TV20...3-20061128.zip
> Also, you might want to use the latest PVR software. Not sure if it works in
> Vista, but if not you might want to check out BeyondTV 4.6
> http://www.snapstream.com/download/b.../Download2.asp Again, only for
> 32 bit Vista.
>
>

Have you also checked to be sure MOBO Bios is up to date?
Can you play a DVD in MCE and get sound?

"Not a Vista Fan" <NotaVistaFan@discussions.microsoft.com> wrote in message
news:27DD8700-7311-414C-A76D-6798A055A2C0@microsoft.com...
> Yes as i mentioned all Vista whql drivers for all hardware available or
> newest beta drivers. and i did try beyond tv, it didnt detect recording
> device either.
>
> "Wayne Wastier" wrote:
>
>> "Not a Vista Fan" <NotaVistaFan@discussions.microsoft.com> wrote in
>> message
>> news:114592E6-FDD3-4295-82A9-B14198C5F191@microsoft.com...
>> > card worked fine in xp but since clean install to Vista no hardware
>> > sound
>> > option in menu of pvr software. Have tried several different pvr
>> > softwares
>> > no option for sound other than output lines, need aux or cd in .
>> > Installed
>> > latest ac97 drivers and no help all drivers bios etc... updated. Even
>> > bought
>> > sb audigy card and plugged card sound output to sb card and still no
>> > option
>> > in any software. Vista drivers for audigy also installed. uninstall
>> > mobo
>> > sound first of course. Tech support at leadtek.com has said problem
>> > results
>> > from Vista resoursing software programs instead of hardware. TV card
>> > is
>> > recommended on Vista site certified and all that.
>> > leadtek TV2000 xp expert rm with vista driver. Media center wont
>> > detect
>> > card but am told that is result of crossbar use by leadtek. Have
>> > uninstalled
>> > tv card and sb card repeatedly but no good.
>>
>>
>> Did you use the Vista driver? And remember, it is 32bit only.
>> ftp://ftp1.leadtek.com/tv_tuner/TV20...3-20061128.zip
>> Also, you might want to use the latest PVR software. Not sure if it works
>> in
>> Vista, but if not you might want to check out BeyondTV 4.6
>> http://www.snapstream.com/download/b.../Download2.asp Again, only
>> for
>> 32 bit Vista.
>>
>>

jesus, ALL ALL ALL ALL drivers are latest mobo bios video sound al
all all all all all all all all all all all all all all all all all all all
all all all all all all all yes ALL.

"JW" wrote:

> Have you also checked to be sure MOBO Bios is up to date?
> Can you play a DVD in MCE and get sound?
>
> "Not a Vista Fan" <NotaVistaFan@discussions.microsoft.com> wrote in message
> news:27DD8700-7311-414C-A76D-6798A055A2C0@microsoft.com...
> > Yes as i mentioned all Vista whql drivers for all hardware available or
> > newest beta drivers. and i did try beyond tv, it didnt detect recording
> > device either.
> >
> > "Wayne Wastier" wrote:
> >
> >> "Not a Vista Fan" <NotaVistaFan@discussions.microsoft.com> wrote in
> >> message
> >> news:114592E6-FDD3-4295-82A9-B14198C5F191@microsoft.com...
> >> > card worked fine in xp but since clean install to Vista no hardware
> >> > sound
> >> > option in menu of pvr software. Have tried several different pvr
> >> > softwares
> >> > no option for sound other than output lines, need aux or cd in .
> >> > Installed
> >> > latest ac97 drivers and no help all drivers bios etc... updated. Even
> >> > bought
> >> > sb audigy card and plugged card sound output to sb card and still no
> >> > option
> >> > in any software. Vista drivers for audigy also installed. uninstall
> >> > mobo
> >> > sound first of course. Tech support at leadtek.com has said problem
> >> > results
> >> > from Vista resoursing software programs instead of hardware. TV card
> >> > is
> >> > recommended on Vista site certified and all that.
> >> > leadtek TV2000 xp expert rm with vista driver. Media center wont
> >> > detect
> >> > card but am told that is result of crossbar use by leadtek. Have
> >> > uninstalled
> >> > tv card and sb card repeatedly but no good.
> >>
> >>
> >> Did you use the Vista driver? And remember, it is 32bit only.
> >> ftp://ftp1.leadtek.com/tv_tuner/TV20...3-20061128.zip
> >> Also, you might want to use the latest PVR software. Not sure if it works
> >> in
> >> Vista, but if not you might want to check out BeyondTV 4.6
> >> http://www.snapstream.com/download/b.../Download2.asp Again, only
> >> for
> >> 32 bit Vista.
> >>
> >>
>
>
>