Vista - Will Vista networking be fixed?

When will a patch come out that fixes the problems with Windows Vista
networking? Also, I am having difficulty finding posts from users who have
had success with the suggestions by the experts here.

In 3 months of owning a Vista Home Premium system I have not yet been able
to successfully share files between the Vista and XP boxes. Don't ask. I've
tried that already. It doesn't work.

On Sat, 22 Dec 2007 16:30:00 -0800, InsectNet
<InsectNet@xxxxxx> wrote:

It took a little voodoo work--very different than XP, a new learning
experience, but I got mine working properly.

http://technet.microsoft.com/en-us/l.../bb727037.aspx

Have a read of the above link re Vista File and Printer Sharing.
How to give Permissions are there, too.

1st thing to do is make sure that the Workgroup Name of ALL the computers is
the SAME.

In Vista Network and Sharing:

Network Discovery: ON (So it can see the other computers)

Network set to Private (Public is for hotspots, airports, etc)

File Sharing: ON

Public Folder Sharing: ON (Vista’s Public Folder is the same as XP’s Shared
Docs)

Password Protected: OFF (unless you want to set up identical usernames and
passwords on ALL computers in your Network) If you have it ON, you will be
asked for a username and password when you try to access a Vista computer
from an XP computer.

Also, run the XP’s Home Network File and Printer sharing Wizard.


"InsectNet" wrote:

Get Network Magic. Solved it for me. There's a free trial.

"InsectNet" <InsectNet@xxxxxx> wrote in message
news:EE059B56-77F9-45EE-8B3C-F18E825CBAC9@xxxxxxCertainly puzzling and irksome but the fact that mine works between
Vista , XP , W98 (now retired) and a NAS for shares ( mapped network
drives, paths in shortcuts, Explorer ), printer, backups and Internet
would indicate to me that these are configuration/hardware problems,
although I've never been able to discern the essential difference
bertween my setup and any of the situations described by those having
difficulties, other than my use of structured wiring.

Tom

"George B" <ghbennett@xxxxxx> wrote in message
news:OLz34S2SIHA.2268@xxxxxxsnippitGeorge,

I think the answer is going to be 'no' as the W98 (non-SE) machine has
long since gone to the scrap yard. The only setting I can recall was to
'not connect until required' rather than on startup.

I only needed to rescue of few bits from the W98 PC as my XP machine was
doing the real work by then but the transfers were pushes from W98 and
proceeded OK as I recall. I'm sure I flogged down through 'Network' in
the Explorer tree to get to the Vista Public folder rather than setting
up our customary methods of mapped drives, or desktop shortcuts to
Explorer with appropriate switches and paths, to folders on the target
machine.

Some current Vista settings are -
Networking & sharing
Net discovery = custom ( i.e firewall job)
File/Public/Printer sharings = On
Password protection = Off ( but matching usernames and passwords are
set anyway)

LAN
LLTD mapper and responder used
TCP/IP has Netbios over TCP/IP ticked

Actually using One Care now but the redundant Windows Firewall's
settings still show as including
Core networking
File & printer sharing
Network discovery

A Dell pre-installed McAfee firewall on the Vista PC did cause very slow
copies, but only of files *pushed from* Vista to the XP and NAS, until
it was actually un-installed.

My HP printer had over time been connected to the W98 PC then to the XP
PC before the Vista machine and the printer driver on W98, for those
historic reasons, was the original proprietary HP one. I don't remember
adding additional drivers on Vista and now have only 'x86 Type 3 User
mode' showing in the extra drivers under 'Sharing'.
We have a genealogy program which often stalled printing with an error
in an HP module when printing from W98 to XP (but has been fine from XP
to Vista), extra driver for W98 on XP never fixed that.

I doubt I've told you anything new and the W98 side is already a bit
hazy I'm afraid.

Tom

Tom,

I appreciate your taking the time to respond. Your information helps to
fill in the big picture, but I'm afraid I may have to pray for a miracle
(maybe Vista SP1 ? !) to get this working perfectly. Thanks again.

George

"George B" <ghbennett@xxxxxx> wrote in message
news:%23w1XDQBTIHA.4440@xxxxxxIt's no trouble, good luck.

Tom