![]() |
![]() | ![]() | ![]() | ![]() | ![]() | ![]() |
| Welcome to Windows Vista Forums. Our forum is dedicated to helping you find solutions with any problems, errors or issues you are experiencing with Windows Vista. The Vista forum also covers news and updates and has an extensive Windows Vista tutorial section that covers a wide range of tips and tricks. |
| | |||||||
| |
| 01-31-2008 | #1 (permalink) |
| | Accessing other XP machine and NAS from Vista I have a problem with new vista machines unable to access existing machines. I used to have two desktops and a laptop all running XP and a network storage device. Each machine could share with every other machine and everything was fine. One of the desktops and the laptop died, to be replaced by two new laptops running vista. So I now have: 1 desktop running XP Home SP2 1 laptop running vista home basic 1 laptop running vista home premium 1 QNAP TS-101 NAS Everything is networked via a Speedtouch router with built in firewall The desktop can access all machines. The two vista machines can share both ways between them. However, the vista laptop machines cannot access the desktop or NAS. They can see the available shares, but when you try and access anything, you get the following message: " \\computername is not accessible. You might not have permission to use the network resource. Contact the administrator of this server to find out if you have access permissions". I've trawled through dozens of pages on the internet looking for info. As a result, here are some of the settings and things I have tried: firewalls turned off on all machines all machines have the same workgroup name file and printer sharing is on everywhere run the Home Network File sharing Wizard on the XP machine created a user account on each machine with the same username and password on the vista machines network is set to private network discovery is on file sharing is on public folder sharing is on installed the LLTD Responder software on XP machine in TCP/IP properties, set always use netbios over tcp/ip and turned off use lmhosts RestrictAnonymous Registry entry is 0 on all machines tried setting LmCompatibilityLevel to 1 on all machines A subsidiary problem is that when I show the full network on the vista machines, they see all the machines, but can't place the NAS in the network. Any suggestions? Thanks for any help. |
| My System Specs |
| 01-31-2008 | #2 (permalink) |
| | Re: Accessing other XP machine and NAS from Vista 1. Create the username on all 3 computers. hopefully that will fix the accessing XP issue. Vista common issue - can see but ...and one xp from the vista however one is prompting for a user name and ... so that you may want to create same username and password on the both computers. ... http://www.chicagotech.net/netforums...opic.php?t=450 2. NAS could be the LM Authentication issue. Check this link for more details. Vista Permission IssuesVista: Can’t access NAS,MAC, Linux, Samba and Win98 > http://www.chicagotech.net/netforums/viewforum.php?f=1 > > Bob Lin, MS-MVP, MCSE & CNE . ... www.chicagotech.net/vista/vistapermission.htm -- Bob Lin, MS-MVP, MCSE & CNE Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com "ben" <ben@xxxxxx> wrote in message news:5EA61674-27DD-4BB0-BEB8-DE4A26F9E4A6@xxxxxx Quote: >I have a problem with new vista machines unable to access existing >machines. > I used to have two desktops and a laptop all running XP and a network > storage > device. Each machine could share with every other machine and everything > was > fine. > > One of the desktops and the laptop died, to be replaced by two new laptops > running vista. So I now have: > 1 desktop running XP Home SP2 > 1 laptop running vista home basic > 1 laptop running vista home premium > 1 QNAP TS-101 NAS > Everything is networked via a Speedtouch router with built in firewall > > The desktop can access all machines. The two vista machines can share > both > ways between them. However, the vista laptop machines cannot access the > desktop or NAS. They can see the available shares, but when you try and > access anything, you get the following message: > > " \\computername is not accessible. You might not have permission > to use the network resource. Contact the administrator of this server > to find out if you have access permissions". > > I've trawled through dozens of pages on the internet looking for info. As > a > result, here are some of the settings and things I have tried: > > firewalls turned off on all machines > all machines have the same workgroup name > file and printer sharing is on everywhere > run the Home Network File sharing Wizard on the XP machine > created a user account on each machine with the same username and password > on the vista machines > network is set to private > network discovery is on > file sharing is on > public folder sharing is on > installed the LLTD Responder software on XP machine > in TCP/IP properties, set always use netbios over tcp/ip and turned off > use > lmhosts > RestrictAnonymous Registry entry is 0 on all machines > tried setting LmCompatibilityLevel to 1 on all machines > > A subsidiary problem is that when I show the full network on the vista > machines, they see all the machines, but can't place the NAS in the > network. > > Any suggestions? Thanks for any help. |
| My System Specs |
| 01-31-2008 | #3 (permalink) |
| | Re: Accessing other XP machine and NAS from Vista On Thu, 31 Jan 2008 06:01:03 -0800, ben <ben@xxxxxx> wrote: Quote: >I have a problem with new vista machines unable to access existing machines. >I used to have two desktops and a laptop all running XP and a network storage >device. Each machine could share with every other machine and everything was >fine. > >One of the desktops and the laptop died, to be replaced by two new laptops >running vista. So I now have: >1 desktop running XP Home SP2 >1 laptop running vista home basic >1 laptop running vista home premium >1 QNAP TS-101 NAS >Everything is networked via a Speedtouch router with built in firewall > >The desktop can access all machines. The two vista machines can share both >ways between them. However, the vista laptop machines cannot access the >desktop or NAS. They can see the available shares, but when you try and >access anything, you get the following message: > >" \\computername is not accessible. You might not have permission >to use the network resource. Contact the administrator of this server >to find out if you have access permissions". > >I've trawled through dozens of pages on the internet looking for info. As a >result, here are some of the settings and things I have tried: > >firewalls turned off on all machines >all machines have the same workgroup name >file and printer sharing is on everywhere >run the Home Network File sharing Wizard on the XP machine >created a user account on each machine with the same username and password >on the vista machines > network is set to private > network discovery is on > file sharing is on > public folder sharing is on >installed the LLTD Responder software on XP machine >in TCP/IP properties, set always use netbios over tcp/ip and turned off use >lmhosts >RestrictAnonymous Registry entry is 0 on all machines >tried setting LmCompatibilityLevel to 1 on all machines > >A subsidiary problem is that when I show the full network on the vista >machines, they see all the machines, but can't place the NAS in the network. > >Any suggestions? Thanks for any help. The desktop computer, running XP Home, will have Guest access only. Make sure that Guest is properly activated. <http://nitecruzr.blogspot.com/2005/06/file-sharing-under-windows-xp.html#Guest> http://nitecruzr.blogspot.com/2005/0...-xp.html#Guest If you trust all users of each computer equally (or if you're the only user) then disabling Password Protected Sharing (Vista) or enabling Simple File Sharing (XP), then enabling Guest on all computers, is the reliable and simple way to setup your LAN. <http://nitecruzr.blogspot.com/2005/06/file-sharing-under-windows-xp.html#Simple> http://nitecruzr.blogspot.com/2005/0...xp.html#Simple If you're having problems accessing a NAS from Vista, that may be an authentication protocol problem. Vista only uses NTLM V2; XP would use NTLM V1 or V2, as required. <http://nitecruzr.blogspot.com/2007/05/microsoft-windows-and-authentication.html> http://nitecruzr.blogspot.com/2007/0...ntication.html -- Cheers, Chuck, MS-MVP 2005-2007 [Windows - Networking] http://nitecruzr.blogspot.com/ Paranoia is not a problem, when it's a normal response from experience. My email is AT DOT actual address pchuck mvps org. |
| My System Specs |
| 01-31-2008 | #4 (permalink) |
| | Re: Accessing other XP machine and NAS from Vista Thanks for the response, Robert. 1. I have already, created the same username and password on both the Vista and Xp machines, but this doesn't work I'm afraid. 2. I've already tried setting the LmCompatibilityLevel to 1, but again, this hasn't worked. |
| My System Specs |
| 01-31-2008 | #5 (permalink) |
| | Re: Accessing other XP machine and NAS from Vista Thanks for the response, Chuck. I've tried activating the Guest account as you suggest. Unfortunately, this hasn't helped. Incidentally, in your instructions, you show the use of a -g option with the ntrights utility which gave an error. I assume that -u should be used, which then refers to either a user or group, whichever the specified name happens to be. I could try the simple password disabling route if you think it might work, but it's not ideal. As I've already said, I've already tried setting the LmCompatibilityLevel to 1 and it hasn't worked. |
| My System Specs |
| 01-31-2008 | #6 (permalink) |
| | Re: Accessing other XP machine and NAS from Vista Also check the permission in the Security tab. If you have XP home, you may want to disable simple file sharing. This how to talk about how to share file on Vista, but it is the same idea. How to share files or a folder on Windows Vista http://www.howtonetworking.com/vista/sharingfolders.htm -- Bob Lin, MS-MVP, MCSE & CNE Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com "ben" <ben@xxxxxx> wrote in message news 6162D06-600D-4B91-9A15-FCC736DAEE24@xxxxxxQuote: > > Thanks for the response, Robert. > > 1. I have already, created the same username and password on both the > Vista > and Xp machines, but this doesn't work I'm afraid. > > 2. I've already tried setting the LmCompatibilityLevel to 1, but again, > this hasn't worked. |
| My System Specs |
| 02-01-2008 | #7 (permalink) |
| | Re: Accessing other XP machine and NAS from Vista What do you mean by "simple file sharing" on XP? File sharing is turned on as part of the network set up. Please don't forget that I can see shared files on the Vista machines from XP. I have also accessed shared files on the XP machine from other XP machines in the past. Ben. "Robert L. (MS-MVP)" wrote: Quote: > Also check the permission in the Security tab. If you have XP home, you may > want to disable simple file sharing. This how to talk about how to share > file on Vista, but it is the same idea. > > How to share files or a folder on Windows Vista > http://www.howtonetworking.com/vista/sharingfolders.htm > > -- > Bob Lin, MS-MVP, MCSE & CNE > Networking, Internet, Routing, VPN Troubleshooting on > http://www.ChicagoTech.net > How to Setup Windows, Network, VPN & Remote Access on > http://www.HowToNetworking.com > > > "ben" <ben@xxxxxx> wrote in message > news 6162D06-600D-4B91-9A15-FCC736DAEE24@xxxxxxQuote: > > > > Thanks for the response, Robert. > > > > 1. I have already, created the same username and password on both the > > Vista > > and Xp machines, but this doesn't work I'm afraid. > > > > 2. I've already tried setting the LmCompatibilityLevel to 1, but again, > > this hasn't worked. > |
| My System Specs |
| 02-01-2008 | #8 (permalink) |
| | Re: Accessing other XP machine and NAS from Vista On Thu, 31 Jan 2008 10:51:01 -0800, ben <ben@xxxxxx> wrote: Quote: > >Thanks for the response, Chuck. > >I've tried activating the Guest account as you suggest. Unfortunately, this >hasn't helped. Incidentally, in your instructions, you show the use of a -g >option with the ntrights utility which gave an error. I assume that -u >should be used, which then refers to either a user or group, whichever the >specified name happens to be. > >I could try the simple password disabling route if you think it might work, >but it's not ideal. > >As I've already said, I've already tried setting the LmCompatibilityLevel to >1 and it hasn't worked. If you have a computer running XP Home (with Simple File Sharing forceably enabled), you should disable Password Protected Sharing in Vista. Then, you'll need to ensure that Guest is active on all computers for network access. <http://nitecruzr.blogspot.com/2005/06/file-sharing-under-windows-xp.html#Guest> http://nitecruzr.blogspot.com/2005/0...-xp.html#Guest Than let's try some diagnostics. Look at logs from "browstat status", "ipconfig /all", "net config server", and "net config workstation", from each computer. Read this article, and linked articles, and follow instructions precisely (Download browstat, and note the command window in Vista!): <http://nitecruzr.blogspot.com/2005/05/troubleshooting-network-neighborhood.html#AskingForHelp> http://nitecruzr.blogspot.com/2005/0...#AskingForHelp -- Cheers, Chuck, MS-MVP 2005-2007 [Windows - Networking] http://nitecruzr.blogspot.com/ Paranoia is not a problem, when it's a normal response from experience. My email is AT DOT actual address pchuck mvps org. |
| My System Specs |
| 02-04-2008 | #9 (permalink) |
| | Re: Accessing other XP machine and NAS from Vista Thanks for continuing to help, Chuck. I've been away over the weekend, hence delay in replying. Whilst away, I took the opportunity to try one of the laptops in a different network with another Windows XP machine. I installed the LLTD Responder and ran the network wizard on the XP machine. I was then able to see shared files on the XP machine. I wasn't able to see files on the Vista machine, but I didn't try any further. I've run the diagnostics you have suggested. I found that when I run the "net config server" command on the Vista machine, I get the following error: System error 5 has occurred Access is denied Is this a symptom of the problem I am experiencing? Also, I was unable to uninstall TCP/IPV6, as suggested. Whenever I selected it, the uninstall option was greyed out. I have disabled it. I can't see anything else untoward. Below is the output. Any further ideas? Ben ================================================= Desktop computer Windows XP Home SP2 IPCONFIG Windows IP Configuration Host Name . . . . . . . . . . . . : BlackEvesham Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : lan Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : lan Description . . . . . . . . . . . : SiS 900-Based PCI Fast Ethernet Adapter Physical Address. . . . . . . . . : 00-01-6C-EC-49-91 Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 192.168.1.67 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.254 DHCP Server . . . . . . . . . . . : 192.168.1.254 DNS Servers . . . . . . . . . . . : 192.168.1.254 Lease Obtained. . . . . . . . . . : 04 February 2008 18:50:30 Lease Expires . . . . . . . . . . : 05 February 2008 18:50:30 NET CONFIG Server Name \\BLACKEVESHAM Server Comment Black Evesham in Study Software version Windows 2002 Server is active on NetBT_Tcpip_{15A9A7B3-A5A2-4B57-B24A-1B647FBC1353} (00016cec4991) NetbiosSmb (000000000000) Server hidden No Maximum Logged On Users 5 Maximum open files per session 16384 Idle session time (min) 15 The command completed successfully. Computer name \\BLACKEVESHAM Full Computer name BlackEvesham User name Ben Workstation active on NetbiosSmb (000000000000) NetBT_Tcpip_{15A9A7B3-A5A2-4B57-B24A-1B647FBC1353} (00016CEC4991) Software version Windows 2002 Workstation domain MSHOME Workstation Domain DNS Name (null) Logon domain BLACKEVESHAM COM Open Timeout (sec) 0 COM Send Count (byte) 16 COM Send Timeout (msec) 250 The command completed successfully. BROWSTAT Status for domain MSHOME on transport \Device\NetBT_Tcpip_{15A9A7B3-A5A2-4B57-B24A-1B647FBC1353} Browsing is active on domain. Master browser name is: BLACKEVESHAM Master browser is running build 2600 1 backup servers retrieved from master BLACKEVESHAM \\BLACKEVESHAM There are 2 servers in domain MSHOME on transport \Device\NetBT_Tcpip_{15A9A7B3-A5A2-4B57-B24A-1B647FBC1353} There are 1 domains in domain MSHOME on transport \Device\NetBT_Tcpip_{15A9A7B3-A5A2-4B57-B24A-1B647FBC1353} ================================================= Laptop computer Windows Vista Basic IPCONFIG Windows IP Configuration Host Name . . . . . . . . . . . . : ToshSat Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : lan Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : lan Description . . . . . . . . . . . : Atheros AR5005G Wireless Network Adapter Physical Address. . . . . . . . . : 00-16-E3-C5-24-C4 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.1.72(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : 04 February 2008 16:39:15 Lease Expires . . . . . . . . . . : 05 February 2008 16:41:05 Default Gateway . . . . . . . . . : 192.168.1.254 DHCP Server . . . . . . . . . . . : 192.168.1.254 DNS Servers . . . . . . . . . . . : 192.168.1.254 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter Local Area Connection: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek RTL8139/810x Family Fast Ethernet NIC Physical Address. . . . . . . . . : 00-16-36-F9-88-B4 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Tunnel adapter Local Area Connection* 6: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface Physical Address. . . . . . . . . : 02-00-54-55-4E-01 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Tunnel adapter Local Area Connection* 7: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : isatap.{64269981-636F-4FAD-B04A-F32E57C2C26A} Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Tunnel adapter Local Area Connection* 9: Connection-specific DNS Suffix . : lan Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2 Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::5efe:192.168.1.72%12(Preferred) Default Gateway . . . . . . . . . : DNS Servers . . . . . . . . . . . : 192.168.1.254 NetBIOS over Tcpip. . . . . . . . : Disabled NET CONFIG {net config Server failed - see above} Computer name \\TOSHSAT Full Computer name ToshSat User name Ben Workstation active on NetbiosSmb (000000000000) NetBT_Tcpip_{85B9BBD9-7474-4605-8E3F-FE01B97288A7} (0016E3C524C4) Software version Windows Vista (TM) Home Basic Workstation domain MSHOME Logon domain ToshSat COM Open Timeout (sec) 0 COM Send Count (byte) 16 COM Send Timeout (msec) 250 The command completed successfully. BROWSTAT Status for domain MSHOME on transport \Device\NetBT_Tcpip_{85B9BBD9-7474-4605-8E3F-FE01B97288A7} Browsing is active on domain. Master browser name is: BLACKEVESHAM Could not connect to registry, error = 53 Unable to determine build of browser master: 53 \\\\BLACKEVESHAM . Version:05.01 Flags: 51203 NT POTENTIAL MASTER 1 backup servers retrieved from master BLACKEVESHAM \\BLACKEVESHAM There are 2 servers in domain MSHOME on transport \Device\NetBT_Tcpip_{85B9BBD9-7474-4605-8E3F-FE01B97288A7} There are 1 domains in domain MSHOME on transport \Device\NetBT_Tcpip_{85B9BBD9-7474-4605-8E3F-FE01B97288A7} |
| My System Specs |
| 02-04-2008 | #10 (permalink) |
| | Re: Accessing other XP machine and NAS from Vista I've just tried something I've tried before but not recently. Since I've made a few changes, I ought to have tried it again before now. Anyway, it was to try accessing shared files on the XP machine using a wired link instead of wireless. Lo and behold, it works. I can also access the NAS. So, the issue is what is different between the wired and wireless connections. Do you have recommendations for investigation of this? |
| My System Specs |
| Thread Tools | |
| |
| Similar topics to: Accessing other XP machine and NAS from Vista | ||||
| Thread | Forum | |||
| Accessing Vista machine without using passwords/user ID login | Vista General | |||
| accessing XP machine from Vista | Vista networking & sharing | |||
| XP Machine accessing Vista Machine over Network | Vista networking & sharing | |||
| WXP Pro machines accessing Vista machine on workgroup | Vista networking & sharing | |||
| Error accessing Remote Services on Vista Machine | Vista security | |||