I recenly purchased a Toshiba laptop with Vista. I would like to network
with my current desktop which has XP home and an HP 1200 series printer and
an Epson printer. The wire router is D-Link. The desktop is able to see my
computer but my laptop w/ vista is unable to share or add printer; it says I
have no access.

--
DeAnna

DeAnna wrote:

> I recenly purchased a Toshiba laptop with Vista. I would like to network
> with my current desktop which has XP home and an HP 1200 series printer
> and
> an Epson printer. The wire router is D-Link. The desktop is able to see
> my
> computer but my laptop w/ vista is unable to share or add printer; it
> says I have no access.
>

Here are general network troubleshooting steps. Not everything may be
applicable to your situation, so just take the bits that are. It may look
daunting, but if you follow the steps at the links and suggestions below
systematically and calmly, you will have no difficulty in setting up your
sharing.

Excellent, thorough, yet easy to understand article about File/Printer
Sharing in Vista. Includes details about sharing printers as well as files
and folders:

http://technet.microsoft.com/en-us/l.../bb727037.aspx

For XP, start by running the Network Setup Wizard on all machines (see
caveat in Item A below).

Problems sharing files between computers on a network are generally caused by
1) a misconfigured firewall or overlooked firewall (including a stateful
firewall in a VPN); or 2) inadvertently running two firewalls such as the
built-in Windows Firewall and a third-party firewall; and/or 3) not having
identical user accounts and passwords on all Workgroup machines; 4) trying
to create shares where the operating system does not permit it.

A. Configure firewalls on all machines to allow the Local Area Network (LAN)
traffic as trusted. With Windows Firewall, this means allowing File/Printer
Sharing on the Exceptions tab. Normally running the Network Setup Wizard on
XP will take care of this for those machines.The only "gotcha" is that this
will turn on the XPSP2 Windows Firewall. If you aren't running a third-party
firewall or have an antivirus/security program with its own firewall
component, then you're fine. With third-party firewalls, I usually configure
the LAN allowance with an IP range. Ex. would be 192.168.1.0-192.168.1.254.
Obviously you would substitute your correct subnet. Refer to any third party
security program's Help or user forums for how to properly configure its
firewall. Do not run more than one firewall. DO NOT TURN OFF FIREWALLS;
CONFIGURE THEM CORRECTLY.

B. For ease of organization, put all computers in the same Workgroup. This
is done from the System applet in Control Panel, Computer Name tab.

C. In Vista, turn Password Protected Sharing ON. Create matching user
accounts and passwords on all machines. You do not need to be logged into
the same account on all machines and the passwords assigned to each user
account can be different; the accounts/passwords just need to exist and match
on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY SIMPLE
ONES. If you wish a machine to boot directly to the Desktop (into one
particular user's account) for convenience, you can do this:

XP - Configure Windows to Automatically Login (MVP Ramesh) -
http://windowsxp.mvps.org/Autologon.htm

Vista - Start Orb>Search box>type: netplwiz [enter]
Click on Continue (or supply an administrator's password) when prompted by
UAC

Uncheck the option "Users must enter a user name and password to use this
computer". Select a user account to automatically log on by clicking on the
desired account to highlight it and then hit OK. Enter the correct password
for that user account (if there is one) when prompted. Leave it blank if
there is no password (null).

D. If one or more of the computers is XP Pro or Media Center, turn off Simple
File Sharing (Folder Options>View tab).

E. Create shares as desired. XP Home does not permit sharing of users' home
directories or Program Files, but you can share folders inside those
directories. A better choice is to simply use the Shared Documents folder.
See the first link above for details about Vista sharing.

F. After you have file sharing working (and have tested this by exchanging a
file between all machines), if you want to share a printer connected locally
to one of your computers, share it out from that machine. Then go to the
printer mftr.'s website and download the latest drivers for the correct
operating system(s). Install them on the target machine(s). The printer
should be seen during the installation routine. If it is not, install the
drivers and then use the Add Printer Wizard. In some instances, certain
printers need to be installed as Local printers but that is outside of this
response.

Malke
--
MS-MVP
Elephant Boy Computers - Don't Panic!
http://www.elephantboycomputers.com/#FAQ