Vista - Vista don't get IP Automatically after a bad shutdown in WLAN

I had normally my WLAN profile configured fine, but after a bad shutdown. My
computer, now never get a valid IP, only if I configure a valid IP the
connection works. I have been checking my router but it's ok.

Where is the problem?

Many possible causes. I would check the NIC driver and router firmware first. Or this link may help,

Vista Wireless IssuesVista: Common Problems with 802.11 Wireless ... Inability to Connect and the wireless doesn’t receive the single. 1) It could be the Wireless adapter driver ...
http://www.wifimvp.com/vistawireless.htm


Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
"Santiago Merino" <SantiagoMerino@discussions.microsoft.com> wrote in message news:A2DD2E00-1123-4BD9-BAF0-365DD70A98AE@microsoft.com...
I had normally my WLAN profile configured fine, but after a bad shutdown. My
computer, now never get a valid IP, only if I configure a valid IP the
connection works. I have been checking my router but it's ok.

Where is the problem?

Thanks for you reply, but isn't work.
I have been testing to re-install the wlan driver and doesn't works. And
about the firmware of router is totally independent of the O.S. so, I think
that is something of this O.S.
btw the link that you post doens't work.

Rgds.

"Robert L [MVP - Networking]" wrote:

> Many possible causes. I would check the NIC driver and router firmware first. Or this link may help,
>
> Vista Wireless IssuesVista: Common Problems with 802.11 Wireless ... Inability to Connect and the wireless doesn’t receive the single. 1) It could be the Wireless adapter driver ...
> http://www.wifimvp.com/vistawireless.htm
>
>
> Bob Lin, MS-MVP, MCSE & CNE
> Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
> How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
> "Santiago Merino" <SantiagoMerino@discussions.microsoft.com> wrote in message news:A2DD2E00-1123-4BD9-BAF0-365DD70A98AE@microsoft.com...
> I had normally my WLAN profile configured fine, but after a bad shutdown. My
> computer, now never get a valid IP, only if I configure a valid IP the
> connection works. I have been checking my router but it's ok.
>
> Where is the problem?

The link should work. Also the Microsoft has a update for fixing the Vista wireless issues.

Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
"Robert L [MVP - Networking]" <noreply@hotmail.com> wrote in message news:ONz3r071HHA.5980@TK2MSFTNGP04.phx.gbl...
Many possible causes. I would check the NIC driver and router firmware first. Or this link may help,

Vista Wireless Issues Vista: Common Problems with 802.11 Wireless ... Inability to Connect and the wireless doesn’t receive the single. 1) It could be the Wireless adapter driver ...
http://www.wifimvp.com/vistawireless.htm


Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
"Santiago Merino" <SantiagoMerino@discussions.microsoft.com> wrote in message news:A2DD2E00-1123-4BD9-BAF0-365DD70A98AE@microsoft.com...
I had normally my WLAN profile configured fine, but after a bad shutdown. My
computer, now never get a valid IP, only if I configure a valid IP the
connection works. I have been checking my router but it's ok.

Where is the problem?

try reinstall TCP/IP

"Santiago Merino" <SantiagoMerino@discussions.microsoft.com> wrote in
message news:CB3D1B10-06E1-41CE-B78C-7D077C5FD938@microsoft.com...
> Thanks for you reply, but isn't work.
> I have been testing to re-install the wlan driver and doesn't works. And
> about the firmware of router is totally independent of the O.S. so, I
> think
> that is something of this O.S.
> btw the link that you post doens't work.
>
> Rgds.
>
> "Robert L [MVP - Networking]" wrote:
>
>> Many possible causes. I would check the NIC driver and router firmware
>> first. Or this link may help,
>>
>> Vista Wireless IssuesVista: Common Problems with 802.11 Wireless ...
>> Inability to Connect and the wireless doesn’t receive the single. 1) It
>> could be the Wireless adapter driver ...
>> http://www.wifimvp.com/vistawireless.htm
>>
>>
>> Bob Lin, MS-MVP, MCSE & CNE
>> Networking, Internet, Routing, VPN Troubleshooting on
>> http://www.ChicagoTech.net
>> How to Setup Windows, Network, VPN & Remote Access on
>> http://www.HowToNetworking.com
>> "Santiago Merino" <SantiagoMerino@discussions.microsoft.com> wrote in
>> message news:A2DD2E00-1123-4BD9-BAF0-365DD70A98AE@microsoft.com...
>> I had normally my WLAN profile configured fine, but after a bad
>> shutdown. My
>> computer, now never get a valid IP, only if I configure a valid IP the
>> connection works. I have been checking my router but it's ok.
>>
>> Where is the problem?

How can reinstal TCP/IP? I must uninstall the "Client for Microsoft Networks"
and install again?


"admin" wrote:

> try reinstall TCP/IP
>
> "Santiago Merino" <SantiagoMerino@discussions.microsoft.com> wrote in
> message news:CB3D1B10-06E1-41CE-B78C-7D077C5FD938@microsoft.com...
> > Thanks for you reply, but isn't work.
> > I have been testing to re-install the wlan driver and doesn't works. And
> > about the firmware of router is totally independent of the O.S. so, I
> > think
> > that is something of this O.S.
> > btw the link that you post doens't work.
> >
> > Rgds.
> >
> > "Robert L [MVP - Networking]" wrote:
> >
> >> Many possible causes. I would check the NIC driver and router firmware
> >> first. Or this link may help,
> >>
> >> Vista Wireless IssuesVista: Common Problems with 802.11 Wireless ...
> >> Inability to Connect and the wireless doesn’t receive the single. 1) It
> >> could be the Wireless adapter driver ...
> >> http://www.wifimvp.com/vistawireless.htm
> >>
> >>
> >> Bob Lin, MS-MVP, MCSE & CNE
> >> Networking, Internet, Routing, VPN Troubleshooting on
> >> http://www.ChicagoTech.net
> >> How to Setup Windows, Network, VPN & Remote Access on
> >> http://www.HowToNetworking.com
> >> "Santiago Merino" <SantiagoMerino@discussions.microsoft.com> wrote in
> >> message news:A2DD2E00-1123-4BD9-BAF0-365DD70A98AE@microsoft.com...
> >> I had normally my WLAN profile configured fine, but after a bad
> >> shutdown. My
> >> computer, now never get a valid IP, only if I configure a valid IP the
> >> connection works. I have been checking my router but it's ok.
> >>
> >> Where is the problem?
>
>

I have discover that if I disable IPv6 then get a valid IP. And also I have
been trying make a connection by ethernet with the same results. But in this
case if I disabled the IPv6, the ethernet interface get IP but don't works
dns resolutions.

Any suggestion?

"Robert L [MVP - Networking]" wrote:

> The link should work. Also the Microsoft has a update for fixing the Vista wireless issues.
>
> Bob Lin, MS-MVP, MCSE & CNE
> Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
> How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
> "Robert L [MVP - Networking]" <noreply@hotmail.com> wrote in message news:ONz3r071HHA.5980@TK2MSFTNGP04.phx.gbl...
> Many possible causes. I would check the NIC driver and router firmware first. Or this link may help,
>
> Vista Wireless Issues Vista: Common Problems with 802.11 Wireless ... Inability to Connect and the wireless doesn’t receive the single. 1) It could be the Wireless adapter driver ...
> http://www.wifimvp.com/vistawireless.htm
>
>
> Bob Lin, MS-MVP, MCSE & CNE
> Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
> How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
> "Santiago Merino" <SantiagoMerino@discussions.microsoft.com> wrote in message news:A2DD2E00-1123-4BD9-BAF0-365DD70A98AE@microsoft.com...
> I had normally my WLAN profile configured fine, but after a bad shutdown. My
> computer, now never get a valid IP, only if I configure a valid IP the
> connection works. I have been checking my router but it's ok.
>
> Where is the problem?