![]() |
![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() |
| Welcome to Windows Vista Forums. Our forum is dedicated to helping you find solutions with any problems, errors or issues you are experiencing with Windows Vista. The Vista forum also covers news and updates and has an extensive Windows Vista tutorial section that covers a wide range of tips and tricks. |
| |||||||
![]() |
| |
| | #1 (permalink) |
| | Help: Vista Blue Screen in Continuous Loop Hello everyone, I have already posted to the "Help" boards Toshiba sends their customers to for assistance, but feel there will more than likely be a faster reply (let alone a reply period) related directly to my need. Here is the situation: Am writing concerning my Toshiba laptop, Satellite A135-S4527, currently running with Vista Home Premium. Have had previous short bouts with blue screen errors, but could always find the fix quickly and get back to normal. Not this time, can't even get to Windows for any length of time beyond (literally) seconds before it repeats the cycle of "Did not shut down correctly ... choose a mode" ad infinitum like some horrible computer version of "Groundhog's Day." I was in the midst of finishing the installation of the latest Vista update, and had also been installing "Alcohol 120" when the blue screen appeared with the following message [thank heavens for digital cameras since this flashes and is gone in a flash]: "A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to be sure you have adequate disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters. Check with your hardware vendor for any BIOS updates, disable BIOS memory option such as caching or shadowing. If you need to use Safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup options, and then select Safe mode. Technical Informations: *** STOP: 0x0000007E (0xc0000001, 0x820366EF2,0x804B8A68,0xB04B8764) Collecting data for crash dump... Initializing disk for crash dump... Beginning dump of physical memory. Dumping physical memory to disk: 100 .......(this a part here that my cam didn't catch cause it's so fast.)" Again, Windows won't go to safe mode since each time I select any mode, right as it reaches Windows, this blue screen message will flash out again, then reboot all over. Also, aside from the "7E" number series following the stop, the other numbers do change depending on what I boot to, safe mode w/networking, etc. Needless to say, I would prefer NOT to lose any of the data I have saved to folders. Programs do not matter as I can always reload them. Granted, that's a PITA, but losing data is worse. Silly me, was just about to save everything back to my second hard drive, grrrrr, danged hindsight! *sigh* Please, is there anything I can do to recover from this mess? Suzanne |
My System Specs![]() |
| | #2 (permalink) |
| | Re: Help: Vista Blue Screen in Continuous Loop *~* Suzanne *~* wrote: Quote: > Hello everyone, > > I have already posted to the "Help" boards Toshiba sends their customers > to for assistance, but feel there will more than likely be a faster reply > (let alone a reply period) related directly to my need. Here is the > situation: > > Am writing concerning my Toshiba laptop, Satellite A135-S4527, currently > running with Vista Home Premium. Have had previous short bouts with blue > screen errors, but could always find the fix quickly and get back to > normal. Not this time, can't even get to Windows for any length of time > beyond (literally) seconds before it repeats the cycle of "Did not shut > down correctly ... choose a mode" ad infinitum like some horrible computer > version of "Groundhog's Day." I was in the midst of finishing the > installation of the latest Vista update, and had also been installing > "Alcohol 120" when the blue screen appeared with the following message > [thank heavens for digital cameras since this flashes and is gone in a > flash]: > > "A problem has been detected and windows has been shut down to prevent > damage to > your computer. > > If this is the first time you've seen this stop error screen, restart > your > computer. If this screen appears again, follow these steps: > > Check to be sure you have adequate disk space. If a driver is identified > in the > stop message, disable the driver or check with the manufacturer for driver > updates. Try changing video adapters. > > Check with your hardware vendor for any BIOS updates, disable BIOS > memory option > such as caching or shadowing. If you need to use Safe mode to remove or > disable components, restart your computer, press F8 to select Advanced > Startup options, and then select Safe mode. > > Technical Informations: > > *** STOP: 0x0000007E (0xc0000001, 0x820366EF2,0x804B8A68,0xB04B8764) > > Collecting data for crash dump... > Initializing disk for crash dump... > Beginning dump of physical memory. > Dumping physical memory to disk: 100 > > .......(this a part here that my cam didn't catch cause it's so fast.)" > > Again, Windows won't go to safe mode since each time I select any mode, > right as it reaches Windows, this blue screen message will flash out > again, then reboot all over. Also, aside from the "7E" number series > following the stop, the other numbers do change depending on what I boot > to, safe mode w/networking, etc. > > Needless to say, I would prefer NOT to lose any of the data I have saved > to folders. Programs do not matter as I can always reload them. Granted, > that's a PITA, but losing data is worse. Silly me, was just about to save > everything back to my second hard drive, grrrrr, danged hindsight! *sigh* with it (and other drive virtualization programs like Daemon Tools) before. If you've neglected to back up your data, I would retrieve it first. That way no matter what happens you're covered. As long as the hard drive is physically viable (and I see no reason to believe it isn't in your case), you can get the data off even when you can't boot into Windows. I'll put the data retrieval suggestions at the end of this post. Once your data is safe, use your Vista install DVD to do a System Restore to before you installed Alcohol 120. How to run System Restore from the Vista DVD repair options: http://www.bleepingcomputer.com/tuto...torial142.html http://www.howtogeek.com/howto/windo...ystem-restore/ http://support.microsoft.com/kb/940765 If that's not possible, see the other Repair options here: Repair Vista - http://vistasupport.mvps.org/windows...ir_options.htm Repair A Vista Installation Using The Upgrade Option Of The Vista DVD - http://tinyurl.com/3b7yrj Repair Windows Vista using Startup Repair - http://www.bleepingcomputer.com/tuto...torial148.html Repair Install For Vista For people who only have a restore image and not a real Vista DVD - Windows Vista Recovery Disc Download: http://neosmart.net/blog/2008/window...disc-download/ If all else fails, sadly you'll need to do a restore to factory condition. Make sure to create Restore Points, data backups, and consider purchasing an external hard drive and an imaging program like Acronis True Image so that recovery from these sorts of traumas is easy and quick. 1. Pull the drive and slave it in a computer running a working install of XP/Vista. Depending on the target drive's characteristics, you may need a drive adapter; i.e., laptop-to-IDE or a SATA controller card, etc. A usb/firewire external drive enclosure works very well, too. Use the working Windows Explorer to copy the data to the rescue system's hard drive and then burn the data to cd or dvd. 2. Since you have a laptop, if you have an external hard drive but no second computer, you could also boot the target computer with either a Bart's PE or a Linux live cd such as Knoppix and save the data that way. I'd certainly have some conversation with Alcohol 120's tech support or their user forums about its compatibility with Vista SP1 before installing it again. Malke -- MS-MVP Elephant Boy Computers www.elephantboycomputers.com Don't Panic! |
My System Specs![]() |
| | #3 (permalink) |
| | Re: Help: Vista Blue Screen in Continuous Loop Malke, Thank you so much for all of the information you gathered and posted for me concerning this issue! Between your kind assistance and a gentleman over on the Toshiba help boards [WUGNET], I actually feel as though there's a bit of light now at the end of the Vista rainbow ... no thanks to Alcohol 120. I do find it rather interesting how many times Alcohol 120 came up when I was trying (in vain obviously) to find results myself. Guess it is tied to the "STOP" driver codes. I will most certainly use another program to do the things I expected it to do, and without a doubt will be writing to their main company "the old fashioned way" to get their attention; e-mail only seems to bring bounce back replies and usually some unrelated form letter. Perhaps a burning disk attached to the letter would be too much? *g* Again, I thank you. Am sure this task will stress me out just a tad, never having had anything along these lines before, but the educated assistance will carry me through. Warm Regards ~ Suzanne "Malke" wrote: Quote: > *~* Suzanne *~* wrote: > Quote: > > Hello everyone, > > > > I have already posted to the "Help" boards Toshiba sends their customers > > to for assistance, but feel there will more than likely be a faster reply > > (let alone a reply period) related directly to my need. Here is the > > situation: > > > > Am writing concerning my Toshiba laptop, Satellite A135-S4527, currently > > running with Vista Home Premium. Have had previous short bouts with blue > > screen errors, but could always find the fix quickly and get back to > > normal. Not this time, can't even get to Windows for any length of time > > beyond (literally) seconds before it repeats the cycle of "Did not shut > > down correctly ... choose a mode" ad infinitum like some horrible computer > > version of "Groundhog's Day." I was in the midst of finishing the > > installation of the latest Vista update, and had also been installing > > "Alcohol 120" when the blue screen appeared with the following message > > [thank heavens for digital cameras since this flashes and is gone in a > > flash]: > > > > "A problem has been detected and windows has been shut down to prevent > > damage to > > your computer. > > > > If this is the first time you've seen this stop error screen, restart > > your > > computer. If this screen appears again, follow these steps: > > > > Check to be sure you have adequate disk space. If a driver is identified > > in the > > stop message, disable the driver or check with the manufacturer for driver > > updates. Try changing video adapters. > > > > Check with your hardware vendor for any BIOS updates, disable BIOS > > memory option > > such as caching or shadowing. If you need to use Safe mode to remove or > > disable components, restart your computer, press F8 to select Advanced > > Startup options, and then select Safe mode. > > > > Technical Informations: > > > > *** STOP: 0x0000007E (0xc0000001, 0x820366EF2,0x804B8A68,0xB04B8764) > > > > Collecting data for crash dump... > > Initializing disk for crash dump... > > Beginning dump of physical memory. > > Dumping physical memory to disk: 100 > > > > .......(this a part here that my cam didn't catch cause it's so fast.)" > > > > Again, Windows won't go to safe mode since each time I select any mode, > > right as it reaches Windows, this blue screen message will flash out > > again, then reboot all over. Also, aside from the "7E" number series > > following the stop, the other numbers do change depending on what I boot > > to, safe mode w/networking, etc. > > > > Needless to say, I would prefer NOT to lose any of the data I have saved > > to folders. Programs do not matter as I can always reload them. Granted, > > that's a PITA, but losing data is worse. Silly me, was just about to save > > everything back to my second hard drive, grrrrr, danged hindsight! *sigh* > The issue is probably caused by Alcohol 120. This sort of thing has happened > with it (and other drive virtualization programs like Daemon Tools) before. > If you've neglected to back up your data, I would retrieve it first. That > way no matter what happens you're covered. As long as the hard drive is > physically viable (and I see no reason to believe it isn't in your case), > you can get the data off even when you can't boot into Windows. I'll put > the data retrieval suggestions at the end of this post. > > Once your data is safe, use your Vista install DVD to do a System Restore to > before you installed Alcohol 120. > > How to run System Restore from the Vista DVD repair options: > http://www.bleepingcomputer.com/tuto...torial142.html > http://www.howtogeek.com/howto/windo...ystem-restore/ > http://support.microsoft.com/kb/940765 > > If that's not possible, see the other Repair options here: > > Repair Vista - http://vistasupport.mvps.org/windows...ir_options.htm > Repair A Vista Installation Using The Upgrade Option Of The Vista DVD - > http://tinyurl.com/3b7yrj > Repair Windows Vista using Startup Repair - > http://www.bleepingcomputer.com/tuto...torial148.html > Repair Install For Vista > > For people who only have a restore image and not a real Vista DVD - Windows > Vista Recovery Disc Download: > http://neosmart.net/blog/2008/window...disc-download/ > > If all else fails, sadly you'll need to do a restore to factory condition. > Make sure to create Restore Points, data backups, and consider purchasing > an external hard drive and an imaging program like Acronis True Image so > that recovery from these sorts of traumas is easy and quick. > > 1. Pull the drive and slave it in a computer running a working install of > XP/Vista. Depending on the target drive's characteristics, you may need a > drive adapter; i.e., laptop-to-IDE or a SATA controller card, etc. A > usb/firewire external drive enclosure works very well, too. Use the working > Windows Explorer to copy the data to the rescue system's hard drive and > then burn the data to cd or dvd. > > 2. Since you have a laptop, if you have an external hard drive but no second > computer, you could also boot the target computer with either a Bart's PE > or a Linux live cd such as Knoppix and save the data that way. > > I'd certainly have some conversation with Alcohol 120's tech support or > their user forums about its compatibility with Vista SP1 before installing > it again. > > Malke > -- > MS-MVP > Elephant Boy Computers > www.elephantboycomputers.com > Don't Panic! > |
My System Specs![]() |
| | #4 (permalink) |
| | Re: Help: Vista Blue Screen in Continuous Loop Suzywoo2 wrote: Quote: > Malke, > > Thank you so much for all of the information you gathered and posted for > me concerning this issue! Between your kind assistance and a gentleman > over on the Toshiba help boards [WUGNET], I actually feel as though > there's a bit of light now at the end of the Vista rainbow ... no thanks > to Alcohol 120. > > I do find it rather interesting how many times Alcohol 120 came up when I > was trying (in vain obviously) to find results myself. Guess it is tied to > the "STOP" driver codes. I will most certainly use another program to do > the things I expected it to do, and without a doubt will be writing to > their main company "the old fashioned way" to get their attention; e-mail > only seems to bring bounce back replies and usually some unrelated form > letter. Perhaps a burning disk attached to the letter would be too much? > *g* > > Again, I thank you. Am sure this task will stress me out just a tad, never > having had anything along these lines before, but the educated assistance > will carry me through. As I said, this is not a surprise issue with Alcohol 120 and there have been similar issues with Daemon Tools. I understand the reasons for wanting drive virtualization, but I find that in practice doing this can be iffy. Post back if you need more help. Remember, get your data first. Then the worst that will happen is that you need to do a factory restore. That's a bit of a pain but not nearly as ugly as losing all your special stuff. Be of stout heart. Malke -- MS-MVP Elephant Boy Computers www.elephantboycomputers.com Don't Panic! |
My System Specs![]() |
| | #5 (permalink) |
| | Re: Help: Vista Blue Screen in Continuous Loop "Malke" wrote: Quote: > I'm quite sure you can do this if you take it slowly, patiently, and calmly. > As I said, this is not a surprise issue with Alcohol 120 and there have > been similar issues with Daemon Tools. I understand the reasons for wanting > drive virtualization, but I find that in practice doing this can be iffy. > > Post back if you need more help. Remember, get your data first. Then the > worst that will happen is that you need to do a factory restore. That's a > bit of a pain but not nearly as ugly as losing all your special stuff. > > Be of stout heart. > > Malke > -- > MS-MVP > Elephant Boy Computers > www.elephantboycomputers.com > Don't Panic! > Just wanted to write back to fill you in on what happened with my Toshiba, post-Alcohol 120's blue screen nightmare. I know how often it might feel as though the work you folks do online isn't appreciated, many times because a lot of people simply don't know how to find their way back to the posts ... and as for the rest, it's not for me to assume. Thanks to your excellent information, I am more than pleased to say this is being sent via my laptop, without any loss whatsoever to my data or programs -- other than the loss of Alcohol, which is no loss of course. I was able to restore to a previous save point from a few days before the event, all made so much easier (not to mention cheaper!) with your list of helpful sites and support. Being disabled in this present economy makes taking my computer in somewhere completely impossible, even with the supposed "economic stimulation checks." (Explain to me why folks with low income get the smallest checks - LOL!) Anyway, thank you so much for everything! I used to do an informative and fun-filled newszine online, and once I am able & well enough to get back to it, your company will be mentioned in my helpful links section for people living in your area to utilize. Hope it brings you a return on the blessings you've given me. Big hugs & lots of thanks, Suzanne |
My System Specs![]() |
| | #6 (permalink) |
| | Re: Help: Vista Blue Screen in Continuous Loop *Suzanne*: What did you do to fix this problem, because I had the exact same problem with my laptop, except only I installed Daemon Tools, and you installed Alcoholl 120%. Anyone with experience regarding this topic I would really appreciate it. -- KingWilliam ------------------------------------------------------------------------ KingWilliam's Profile: http://forums.techarena.in/members/kingwilliam.htm View this thread: http://forums.techarena.in/windows-v...nce/964348.htm http://forums.techarena.in |
My System Specs![]() |
![]() |
| Thread Tools | |
| |
Similar Threads | ||||
| Thread | Forum | |||
| Blue/Black Screen Re-Loop and Etc -Urgent- | Vista General | |||
| Restoring from Sleep: Continuous Loop | Vista hardware & devices | |||
| ATI X1600 AGP 512MB - blue screen during setup (driver in infinite loop) | Vista hardware & devices | |||
| ATI X1600 AGP 512MB - blue screen during setup (driver in infinite loop) | Vista installation & setup | |||
| RC1 Driver stuck in infinite loop - blue screen | Vista installation & setup | |||