|
 |  |  |  |  |  |  |
| Welcome to Windows Vista Forums. Our forum is dedicated to helping you find solutions with any problems, errors or issues you are experiencing with Windows Vista. The Vista forum also covers news and updates and has an extensive Windows Vista tutorial section that covers a wide range of tips and tricks. |
| |||||||
 |
| |
10-27-2009
| #1 (permalink) |
| | System Restore won't work Hope I'm in right forum. My OS is Vista Home Premium 64 bit. On a couple of occasions I've tried to action "System Restore". So far I've met with NO success. It seems to go through the motions OK ( if you believe what you see on the moniter) but when the comp restarts I am bluntly informed that restoration has NOT taken place. Doesn't seem a lot of point having a facility like this when it simply will NOT work!! Is this some sort of glitch with Vista 64 bit? Would appreciate any help you can give. Many thanks, Graham -- GPN |
My System Specs |
|
10-27-2009
| #2 (permalink) |
| | Re: System Restore won't work "Graham Newey" <GrahamNewey@newsgroup> wrote in message news:7CDDADC0-6520-47F6-97A0-6BEB722B68DC@newsgroup Quote: > Hope I'm in right forum. > > My OS is Vista Home Premium 64 bit. > > On a couple of occasions I've tried to action "System Restore". So far > I've > met with NO success. > > It seems to go through the motions OK ( if you believe what you see on the > moniter) but when the comp restarts I am bluntly informed that restoration > has NOT taken place. > > Doesn't seem a lot of point having a facility like this when it simply > will > NOT work!! > > Is this some sort of glitch with Vista 64 bit? > > Would appreciate any help you can give. > > Many thanks, > > Graham > -- > GPN firewall or anti-virus? Anything like that can interfere with a successful restore. SC Tom |
| My System Specs |
|
10-28-2009
| #3 (permalink) |
| | Re: System Restore won't work Thanks SC Tom for your time. I use Zone Alarm Free. I was about to write an adjunct to my initial post when I noticed your reply. I was going to say that when attempting to run "System Restore" I had failed to follow the instructions to turn off all running progs etc. It occured to me that that might be the answer to my problem. NOT SO. Switched "everything" off and ran System Restore. Waited with bated breath. Good job I didn't hold it!! No go---did NOT restore. This is frustrating. I don't NEED to use SR but it is annoying to have this facility on my new, shiny, black computer and not be able to get it to operate at all. Any further help would be appreciated. Regards, Graham -- GPN "SC Tom" wrote: Quote: > > "Graham Newey" <GrahamNewey@newsgroup> wrote in message > news:7CDDADC0-6520-47F6-97A0-6BEB722B68DC@newsgroup Quote: > > Hope I'm in right forum. > > > > My OS is Vista Home Premium 64 bit. > > > > On a couple of occasions I've tried to action "System Restore". So far > > I've > > met with NO success. > > > > It seems to go through the motions OK ( if you believe what you see on the > > moniter) but when the comp restarts I am bluntly informed that restoration > > has NOT taken place. > > > > Doesn't seem a lot of point having a facility like this when it simply > > will > > NOT work!! > > > > Is this some sort of glitch with Vista 64 bit? > > > > Would appreciate any help you can give. > > > > Many thanks, > > > > Graham > > -- > > GPN > Do you have any Symantec or Zone Alarm security products installed, such as > firewall or anti-virus? Anything like that can interfere with a successful > restore. > > SC Tom > > . > |
| My System Specs |
|
10-28-2009
| #4 (permalink) |
| | Re: System Restore won't work Turn off System Restore then turn it on. -- .. -- "Graham Newey" <GrahamNewey@newsgroup> wrote in message news:C1D58E51-9AAB-49B9-8EF4-F51908953C22@newsgroup Quote: > Thanks SC Tom for your time. > > I use Zone Alarm Free. > > I was about to write an adjunct to my initial post when I noticed your > reply. > > I was going to say that when attempting to run "System Restore" I had > failed > to follow the instructions to turn off all running progs etc. > > It occured to me that that might be the answer to my problem. NOT SO. > > Switched "everything" off and ran System Restore. Waited with bated > breath. > Good job I didn't hold it!! No go---did NOT restore. > > This is frustrating. I don't NEED to use SR but it is annoying to have > this > facility on my new, shiny, black computer and not be able to get it to > operate at all. > > Any further help would be appreciated. > > Regards, > > Graham > -- > GPN > > > "SC Tom" wrote: > Quote: >> >> "Graham Newey" <GrahamNewey@newsgroup> wrote in message >> news:7CDDADC0-6520-47F6-97A0-6BEB722B68DC@newsgroup Quote: >> > Hope I'm in right forum. >> > >> > My OS is Vista Home Premium 64 bit. >> > >> > On a couple of occasions I've tried to action "System Restore". So far >> > I've >> > met with NO success. >> > >> > It seems to go through the motions OK ( if you believe what you see on >> > the >> > moniter) but when the comp restarts I am bluntly informed that >> > restoration >> > has NOT taken place. >> > >> > Doesn't seem a lot of point having a facility like this when it simply >> > will >> > NOT work!! >> > >> > Is this some sort of glitch with Vista 64 bit? >> > >> > Would appreciate any help you can give. >> > >> > Many thanks, >> > >> > Graham >> > -- >> > GPN >> Do you have any Symantec or Zone Alarm security products installed, such >> as >> firewall or anti-virus? Anything like that can interfere with a >> successful >> restore. >> >> SC Tom >> >> . >> |
| My System Specs |
|
10-28-2009
| #5 (permalink) |
| | Re: System Restore won't work When ZA is the cause of the problem, it not only has to be turned off, but the "Start with Windows" option has to be turned off first. If the restore is successful, it'll start again on its own anyhow. Another method that I've had success with is running SR in Safe Mode with Command Prompt. After booting up, type in c:\windows\system32\restore\rstrui.exe and press enter. It'll bring up the SR UI allowing you to (hopefully) restore to a previous date. SC Tom "Graham Newey" <GrahamNewey@newsgroup> wrote in message news:C1D58E51-9AAB-49B9-8EF4-F51908953C22@newsgroup Quote: > Thanks SC Tom for your time. > > I use Zone Alarm Free. > > I was about to write an adjunct to my initial post when I noticed your > reply. > > I was going to say that when attempting to run "System Restore" I had > failed > to follow the instructions to turn off all running progs etc. > > It occured to me that that might be the answer to my problem. NOT SO. > > Switched "everything" off and ran System Restore. Waited with bated > breath. > Good job I didn't hold it!! No go---did NOT restore. > > This is frustrating. I don't NEED to use SR but it is annoying to have > this > facility on my new, shiny, black computer and not be able to get it to > operate at all. > > Any further help would be appreciated. > > Regards, > > Graham > -- > GPN > > > "SC Tom" wrote: > Quote: >> >> "Graham Newey" <GrahamNewey@newsgroup> wrote in message >> news:7CDDADC0-6520-47F6-97A0-6BEB722B68DC@newsgroup Quote: >> > Hope I'm in right forum. >> > >> > My OS is Vista Home Premium 64 bit. >> > >> > On a couple of occasions I've tried to action "System Restore". So far >> > I've >> > met with NO success. >> > >> > It seems to go through the motions OK ( if you believe what you see on >> > the >> > moniter) but when the comp restarts I am bluntly informed that >> > restoration >> > has NOT taken place. >> > >> > Doesn't seem a lot of point having a facility like this when it simply >> > will >> > NOT work!! >> > >> > Is this some sort of glitch with Vista 64 bit? >> > >> > Would appreciate any help you can give. >> > >> > Many thanks, >> > >> > Graham >> > -- >> > GPN >> Do you have any Symantec or Zone Alarm security products installed, such >> as >> firewall or anti-virus? Anything like that can interfere with a >> successful >> restore. >> >> SC Tom >> >> . >> |
| My System Specs |
|
10-30-2009
| #6 (permalink) |
| | Re: System Restore won't work Thank you annonymous and SC Tom for your comments. Panic over. Works in Safe Mode fine. I will turning SR on and off to see if it WILL run in Win. Regards to both, Graham -- GPN "SC Tom" wrote: Quote: > When ZA is the cause of the problem, it not only has to be turned off, but > the "Start with Windows" option has to be turned off first. If the restore > is successful, it'll start again on its own anyhow. > Another method that I've had success with is running SR in Safe Mode with > Command Prompt. After booting up, type in > c:\windows\system32\restore\rstrui.exe and press enter. It'll bring up the > SR UI allowing you to (hopefully) restore to a previous date. > > SC Tom > > "Graham Newey" <GrahamNewey@newsgroup> wrote in message > news:C1D58E51-9AAB-49B9-8EF4-F51908953C22@newsgroup Quote: > > Thanks SC Tom for your time. > > > > I use Zone Alarm Free. > > > > I was about to write an adjunct to my initial post when I noticed your > > reply. > > > > I was going to say that when attempting to run "System Restore" I had > > failed > > to follow the instructions to turn off all running progs etc. > > > > It occured to me that that might be the answer to my problem. NOT SO. > > > > Switched "everything" off and ran System Restore. Waited with bated > > breath. > > Good job I didn't hold it!! No go---did NOT restore. > > > > This is frustrating. I don't NEED to use SR but it is annoying to have > > this > > facility on my new, shiny, black computer and not be able to get it to > > operate at all. > > > > Any further help would be appreciated. > > > > Regards, > > > > Graham > > -- > > GPN > > > > > > "SC Tom" wrote: > > Quote: > >> > >> "Graham Newey" <GrahamNewey@newsgroup> wrote in message > >> news:7CDDADC0-6520-47F6-97A0-6BEB722B68DC@newsgroup > >> > Hope I'm in right forum. > >> > > >> > My OS is Vista Home Premium 64 bit. > >> > > >> > On a couple of occasions I've tried to action "System Restore". So far > >> > I've > >> > met with NO success. > >> > > >> > It seems to go through the motions OK ( if you believe what you see on > >> > the > >> > moniter) but when the comp restarts I am bluntly informed that > >> > restoration > >> > has NOT taken place. > >> > > >> > Doesn't seem a lot of point having a facility like this when it simply > >> > will > >> > NOT work!! > >> > > >> > Is this some sort of glitch with Vista 64 bit? > >> > > >> > Would appreciate any help you can give. > >> > > >> > Many thanks, > >> > > >> > Graham > >> > -- > >> > GPN > >> > >> Do you have any Symantec or Zone Alarm security products installed, such > >> as > >> firewall or anti-virus? Anything like that can interfere with a > >> successful > >> restore. > >> > >> SC Tom > >> > >> . > >> > . > |
| My System Specs |
|
10-30-2009
| #7 (permalink) |
| | Re: System Restore won't work If you turn it off, then back on, you will lose all your previous restore points. Just wanted to let you know that. SC Tom "Graham Newey" <GrahamNewey@newsgroup> wrote in message news:C3C5D00D-B566-4267-916E-8459AD9EBAE1@newsgroup Quote: > Thank you annonymous and SC Tom for your comments. > > Panic over. Works in Safe Mode fine. > > I will turning SR on and off to see if it WILL run in Win. > > Regards to both, > > Graham > -- > GPN > > > "SC Tom" wrote: > Quote: >> When ZA is the cause of the problem, it not only has to be turned off, >> but >> the "Start with Windows" option has to be turned off first. If the >> restore >> is successful, it'll start again on its own anyhow. >> Another method that I've had success with is running SR in Safe Mode with >> Command Prompt. After booting up, type in >> c:\windows\system32\restore\rstrui.exe and press enter. It'll bring up >> the >> SR UI allowing you to (hopefully) restore to a previous date. >> >> SC Tom >> >> "Graham Newey" <GrahamNewey@newsgroup> wrote in message >> news:C1D58E51-9AAB-49B9-8EF4-F51908953C22@newsgroup Quote: >> > Thanks SC Tom for your time. >> > >> > I use Zone Alarm Free. >> > >> > I was about to write an adjunct to my initial post when I noticed your >> > reply. >> > >> > I was going to say that when attempting to run "System Restore" I had >> > failed >> > to follow the instructions to turn off all running progs etc. >> > >> > It occured to me that that might be the answer to my problem. NOT SO. >> > >> > Switched "everything" off and ran System Restore. Waited with bated >> > breath. >> > Good job I didn't hold it!! No go---did NOT restore. >> > >> > This is frustrating. I don't NEED to use SR but it is annoying to have >> > this >> > facility on my new, shiny, black computer and not be able to get it to >> > operate at all. >> > >> > Any further help would be appreciated. >> > >> > Regards, >> > >> > Graham >> > -- >> > GPN >> > >> > >> > "SC Tom" wrote: >> > >> >> >> >> "Graham Newey" <GrahamNewey@newsgroup> wrote in >> >> message >> >> news:7CDDADC0-6520-47F6-97A0-6BEB722B68DC@newsgroup >> >> > Hope I'm in right forum. >> >> > >> >> > My OS is Vista Home Premium 64 bit. >> >> > >> >> > On a couple of occasions I've tried to action "System Restore". So >> >> > far >> >> > I've >> >> > met with NO success. >> >> > >> >> > It seems to go through the motions OK ( if you believe what you see >> >> > on >> >> > the >> >> > moniter) but when the comp restarts I am bluntly informed that >> >> > restoration >> >> > has NOT taken place. >> >> > >> >> > Doesn't seem a lot of point having a facility like this when it >> >> > simply >> >> > will >> >> > NOT work!! >> >> > >> >> > Is this some sort of glitch with Vista 64 bit? >> >> > >> >> > Would appreciate any help you can give. >> >> > >> >> > Many thanks, >> >> > >> >> > Graham >> >> > -- >> >> > GPN >> >> >> >> Do you have any Symantec or Zone Alarm security products installed, >> >> such >> >> as >> >> firewall or anti-virus? Anything like that can interfere with a >> >> successful >> >> restore. >> >> >> >> SC Tom >> >> >> >> . >> >> >> . >> |
| My System Specs |
|
10-31-2009
| #8 (permalink) |
| | Re: System Restore won't work Thanks Tom. Did realise that. As I can do it in SM, I'll delay the turning off and on!! Thanks again, Graham -- GPN "SC Tom" wrote: Quote: > If you turn it off, then back on, you will lose all your previous restore > points. Just wanted to let you know that. > > SC Tom > > "Graham Newey" <GrahamNewey@newsgroup> wrote in message > news:C3C5D00D-B566-4267-916E-8459AD9EBAE1@newsgroup Quote: > > Thank you annonymous and SC Tom for your comments. > > > > Panic over. Works in Safe Mode fine. > > > > I will turning SR on and off to see if it WILL run in Win. > > > > Regards to both, > > > > Graham > > -- > > GPN > > > > > > "SC Tom" wrote: > > Quote: > >> When ZA is the cause of the problem, it not only has to be turned off, > >> but > >> the "Start with Windows" option has to be turned off first. If the > >> restore > >> is successful, it'll start again on its own anyhow. > >> Another method that I've had success with is running SR in Safe Mode with > >> Command Prompt. After booting up, type in > >> c:\windows\system32\restore\rstrui.exe and press enter. It'll bring up > >> the > >> SR UI allowing you to (hopefully) restore to a previous date. > >> > >> SC Tom > >> > >> "Graham Newey" <GrahamNewey@newsgroup> wrote in message > >> news:C1D58E51-9AAB-49B9-8EF4-F51908953C22@newsgroup > >> > Thanks SC Tom for your time. > >> > > >> > I use Zone Alarm Free. > >> > > >> > I was about to write an adjunct to my initial post when I noticed your > >> > reply. > >> > > >> > I was going to say that when attempting to run "System Restore" I had > >> > failed > >> > to follow the instructions to turn off all running progs etc. > >> > > >> > It occured to me that that might be the answer to my problem. NOT SO. > >> > > >> > Switched "everything" off and ran System Restore. Waited with bated > >> > breath. > >> > Good job I didn't hold it!! No go---did NOT restore. > >> > > >> > This is frustrating. I don't NEED to use SR but it is annoying to have > >> > this > >> > facility on my new, shiny, black computer and not be able to get it to > >> > operate at all. > >> > > >> > Any further help would be appreciated. > >> > > >> > Regards, > >> > > >> > Graham > >> > -- > >> > GPN > >> > > >> > > >> > "SC Tom" wrote: > >> > > >> >> > >> >> "Graham Newey" <GrahamNewey@newsgroup> wrote in > >> >> message > >> >> news:7CDDADC0-6520-47F6-97A0-6BEB722B68DC@newsgroup > >> >> > Hope I'm in right forum. > >> >> > > >> >> > My OS is Vista Home Premium 64 bit. > >> >> > > >> >> > On a couple of occasions I've tried to action "System Restore". So > >> >> > far > >> >> > I've > >> >> > met with NO success. > >> >> > > >> >> > It seems to go through the motions OK ( if you believe what you see > >> >> > on > >> >> > the > >> >> > moniter) but when the comp restarts I am bluntly informed that > >> >> > restoration > >> >> > has NOT taken place. > >> >> > > >> >> > Doesn't seem a lot of point having a facility like this when it > >> >> > simply > >> >> > will > >> >> > NOT work!! > >> >> > > >> >> > Is this some sort of glitch with Vista 64 bit? > >> >> > > >> >> > Would appreciate any help you can give. > >> >> > > >> >> > Many thanks, > >> >> > > >> >> > Graham > >> >> > -- > >> >> > GPN > >> >> > >> >> Do you have any Symantec or Zone Alarm security products installed, > >> >> such > >> >> as > >> >> firewall or anti-virus? Anything like that can interfere with a > >> >> successful > >> >> restore. > >> >> > >> >> SC Tom > >> >> > >> >> . > >> >> > >> > >> . > >> > . > |
| My System Specs |
|
4 Weeks Ago
| #9 (permalink) |
| | Re: System Restore won't work You're welcome. Glad it's working now. SC Tom "Graham Newey" <GrahamNewey@newsgroup> wrote in message news:1063E26E-B663-49CF-96A9-3C62C4E77B78@newsgroup Quote: > Thanks Tom. Did realise that. As I can do it in SM, I'll delay the turning > off and on!! > > Thanks again, > > Graham > -- > GPN > > > "SC Tom" wrote: > Quote: >> If you turn it off, then back on, you will lose all your previous restore >> points. Just wanted to let you know that. >> >> SC Tom >> >> "Graham Newey" <GrahamNewey@newsgroup> wrote in message >> news:C3C5D00D-B566-4267-916E-8459AD9EBAE1@newsgroup Quote: >> > Thank you annonymous and SC Tom for your comments. >> > >> > Panic over. Works in Safe Mode fine. >> > >> > I will turning SR on and off to see if it WILL run in Win. >> > >> > Regards to both, >> > >> > Graham >> > -- >> > GPN >> > >> > >> > "SC Tom" wrote: >> > >> >> When ZA is the cause of the problem, it not only has to be turned off, >> >> but >> >> the "Start with Windows" option has to be turned off first. If the >> >> restore >> >> is successful, it'll start again on its own anyhow. >> >> Another method that I've had success with is running SR in Safe Mode >> >> with >> >> Command Prompt. After booting up, type in >> >> c:\windows\system32\restore\rstrui.exe and press enter. It'll bring up >> >> the >> >> SR UI allowing you to (hopefully) restore to a previous date. >> >> >> >> SC Tom >> >> >> >> "Graham Newey" <GrahamNewey@newsgroup> wrote in >> >> message >> >> news:C1D58E51-9AAB-49B9-8EF4-F51908953C22@newsgroup >> >> > Thanks SC Tom for your time. >> >> > >> >> > I use Zone Alarm Free. >> >> > >> >> > I was about to write an adjunct to my initial post when I noticed >> >> > your >> >> > reply. >> >> > >> >> > I was going to say that when attempting to run "System Restore" I >> >> > had >> >> > failed >> >> > to follow the instructions to turn off all running progs etc. >> >> > >> >> > It occured to me that that might be the answer to my problem. NOT >> >> > SO. >> >> > >> >> > Switched "everything" off and ran System Restore. Waited with bated >> >> > breath. >> >> > Good job I didn't hold it!! No go---did NOT restore. >> >> > >> >> > This is frustrating. I don't NEED to use SR but it is annoying to >> >> > have >> >> > this >> >> > facility on my new, shiny, black computer and not be able to get it >> >> > to >> >> > operate at all. >> >> > >> >> > Any further help would be appreciated. >> >> > >> >> > Regards, >> >> > >> >> > Graham >> >> > -- >> >> > GPN >> >> > >> >> > >> >> > "SC Tom" wrote: >> >> > >> >> >> >> >> >> "Graham Newey" <GrahamNewey@newsgroup> wrote in >> >> >> message >> >> >> news:7CDDADC0-6520-47F6-97A0-6BEB722B68DC@newsgroup >> >> >> > Hope I'm in right forum. >> >> >> > >> >> >> > My OS is Vista Home Premium 64 bit. >> >> >> > >> >> >> > On a couple of occasions I've tried to action "System Restore". >> >> >> > So >> >> >> > far >> >> >> > I've >> >> >> > met with NO success. >> >> >> > >> >> >> > It seems to go through the motions OK ( if you believe what you >> >> >> > see >> >> >> > on >> >> >> > the >> >> >> > moniter) but when the comp restarts I am bluntly informed that >> >> >> > restoration >> >> >> > has NOT taken place. >> >> >> > >> >> >> > Doesn't seem a lot of point having a facility like this when it >> >> >> > simply >> >> >> > will >> >> >> > NOT work!! >> >> >> > >> >> >> > Is this some sort of glitch with Vista 64 bit? >> >> >> > >> >> >> > Would appreciate any help you can give. >> >> >> > >> >> >> > Many thanks, >> >> >> > >> >> >> > Graham >> >> >> > -- >> >> >> > GPN >> >> >> >> >> >> Do you have any Symantec or Zone Alarm security products installed, >> >> >> such >> >> >> as >> >> >> firewall or anti-virus? Anything like that can interfere with a >> >> >> successful >> >> >> restore. >> >> >> >> >> >> SC Tom >> >> >> >> >> >> . >> >> >> >> >> >> >> . >> >> >> . >> |
| My System Specs |
|
| Thread Tools | |
| |
Similar Threads | ||||
| Thread | Forum | |||
| System Restore won't work (again) | Vista General | |||
| System restore and other system apps do not work | Vista General | |||
| Does system restore really work? | Vista General | |||
| System Restore does not work | Vista General | |||
| System Restore Just Doesn't work | Vista performance & maintenance | |||
