Vista - Network scan, unable to connect

11-22-2007

I have a Samsung clx-2160N-SEE. (MFP) Network-scanning do not work with
wireless connection on VIsta. Wireless networkprinting is ok. Networkscan
wired connection works fine. Vista Firewall is turned off, no wireless
security on router. 3com, Thompson and Linksys router has been tested. A
second wireless card has been connected, but its still not possible to scan.
The message is "Unknown error, please check networkconection" The
scannermodule will not connect trough network. I have teste serveral
Vistabased computers with same error. And last...there is NO PROBLEM in
Winxp. Please help, lot of waste time has gone..!

11-23-2007

Good to know. I have the same problem with Vista and a Samsung CLX-3160
FN over WLAN. Also no probs via XP

--
Nokiast
------------------------------------------------------------------------
Nokiast's Profile: http://forums.techarena.in/member.php?userid=35758
View this thread: http://forums.techarena.in/showthread.php?t=857639

http://forums.techarena.in

11-29-2007

Have you tried opening the ports that are used by this printer? Maybe Vista's
firewall is fussier than XPs.
You can find Ports via the System Tray CLX-2160N icon, and select "Printer
Setting". Then the Sync Thru Web pages will open. click on "Network Settings"
and select each option on the left to see the ports. Mine are 9100, 515, 631,
and 427.
One other possibility: if the WLAN IP address is different from the cabled
IP address, check that the address is not blocked in the Sync Thru IP address
blocking page.
Good luck!
Ken.

11-30-2007

Thank You for request. Vista Firewall is turned off, and it works
network-wired, so I think it must be a WiFi problem. I also shared my
wireless connection, but same problem connecting scanner. SyncTru:
IP-filtering is Disabled

-Olav-

"KA Spencer" wrote:

Quote:

> Have you tried opening the ports that are used by this printer? Maybe Vista's
> firewall is fussier than XPs.
> You can find Ports via the System Tray CLX-2160N icon, and select "Printer
> Setting". Then the Sync Thru Web pages will open. click on "Network Settings"
> and select each option on the left to see the ports. Mine are 9100, 515, 631,
> and 427.
> One other possibility: if the WLAN IP address is different from the cabled
> IP address, check that the address is not blocked in the Sync Thru IP address
> blocking page.
> Good luck!
> Ken.

12-07-2007

Hi,

I have the same problem as you: wifi network scan with vista does not work.
Have you found a solution to this problem by now?

Thanks
gtm

"olaveng" wrote:

Quote:

> Thank You for request. Vista Firewall is turned off, and it works
> network-wired, so I think it must be a WiFi problem. I also shared my
> wireless connection, but same problem connecting scanner. SyncTru:
> IP-filtering is Disabled
>
> -Olav-
>
>

12-07-2007

Not yet, but engineers of Samsung is informed, hopefully they will return
with a solution shortly. I will post it when accessible.

-olav-

"gtm" wrote:

Quote:

> Hi,
>
> I have the same problem as you: wifi network scan with vista does not work.
> Have you found a solution to this problem by now?
>
> Thanks
> gtm
>
> "olaveng" wrote:
>

Quote:

> > Thank You for request. Vista Firewall is turned off, and it works
> > network-wired, so I think it must be a WiFi problem. I also shared my
> > wireless connection, but same problem connecting scanner. SyncTru:
> > IP-filtering is Disabled
> >
> > -Olav-
> >
> >

>

12-13-2007

Well good luck. I notified Samsung of the problem months ago and they were
"aware" of the problem then and I still haven't seen an update yet.

"olaveng" wrote:

Quote:

> Not yet, but engineers of Samsung is informed, hopefully they will return
> with a solution shortly. I will post it when accessible.
>
> -olav-
>
> "gtm" wrote:
>

Quote:

> > Hi,
> >
> > I have the same problem as you: wifi network scan with vista does not work.
> > Have you found a solution to this problem by now?
> >
> > Thanks
> > gtm
> >
> > "olaveng" wrote:
> >

Quote:

> > > Thank You for request. Vista Firewall is turned off, and it works
> > > network-wired, so I think it must be a WiFi problem. I also shared my
> > > wireless connection, but same problem connecting scanner. SyncTru:
> > > IP-filtering is Disabled
> > >
> > > -Olav-
> > >
> > >

> >

11-22-2007	#1 (permalink)
olaveng n/a posts	Network scan, unable to connect I have a Samsung clx-2160N-SEE. (MFP) Network-scanning do not work with wireless connection on VIsta. Wireless networkprinting is ok. Networkscan wired connection works fine. Vista Firewall is turned off, no wireless security on router. 3com, Thompson and Linksys router has been tested. A second wireless card has been connected, but its still not possible to scan. The message is "Unknown error, please check networkconection" The scannermodule will not connect trough network. I have teste serveral Vistabased computers with same error. And last...there is NO PROBLEM in Winxp. Please help, lot of waste time has gone..!
My System Specs

11-23-2007	#2 (permalink)
Nokiast n/a posts	Re: Network scan, unable to connect Good to know. I have the same problem with Vista and a Samsung CLX-3160 FN over WLAN. Also no probs via XP -- Nokiast ------------------------------------------------------------------------ Nokiast's Profile: http://forums.techarena.in/member.php?userid=35758 View this thread: http://forums.techarena.in/showthread.php?t=857639 http://forums.techarena.in
My System Specs

11-29-2007	#3 (permalink)
KA Spencer n/a posts	RE: Network scan, unable to connect Have you tried opening the ports that are used by this printer? Maybe Vista's firewall is fussier than XPs. You can find Ports via the System Tray CLX-2160N icon, and select "Printer Setting". Then the Sync Thru Web pages will open. click on "Network Settings" and select each option on the left to see the ports. Mine are 9100, 515, 631, and 427. One other possibility: if the WLAN IP address is different from the cabled IP address, check that the address is not blocked in the Sync Thru IP address blocking page. Good luck! Ken.
My System Specs

11-30-2007	#4 (permalink)
olaveng n/a posts	RE: Network scan, unable to connect Thank You for request. Vista Firewall is turned off, and it works network-wired, so I think it must be a WiFi problem. I also shared my wireless connection, but same problem connecting scanner. SyncTru: IP-filtering is Disabled -Olav- "KA Spencer" wrote: Quote: > Have you tried opening the ports that are used by this printer? Maybe Vista's > firewall is fussier than XPs. > You can find Ports via the System Tray CLX-2160N icon, and select "Printer > Setting". Then the Sync Thru Web pages will open. click on "Network Settings" > and select each option on the left to see the ports. Mine are 9100, 515, 631, > and 427. > One other possibility: if the WLAN IP address is different from the cabled > IP address, check that the address is not blocked in the Sync Thru IP address > blocking page. > Good luck! > Ken.
My System Specs

12-07-2007	#5 (permalink)
gtm n/a posts	RE: Network scan, unable to connect Hi, I have the same problem as you: wifi network scan with vista does not work. Have you found a solution to this problem by now? Thanks gtm "olaveng" wrote: Quote: > Thank You for request. Vista Firewall is turned off, and it works > network-wired, so I think it must be a WiFi problem. I also shared my > wireless connection, but same problem connecting scanner. SyncTru: > IP-filtering is Disabled > > -Olav- > >
My System Specs

12-07-2007	#6 (permalink)
olaveng n/a posts	RE: Network scan, unable to connect Not yet, but engineers of Samsung is informed, hopefully they will return with a solution shortly. I will post it when accessible. -olav- "gtm" wrote: Quote: > Hi, > > I have the same problem as you: wifi network scan with vista does not work. > Have you found a solution to this problem by now? > > Thanks > gtm > > "olaveng" wrote: > Quote: > > Thank You for request. Vista Firewall is turned off, and it works > > network-wired, so I think it must be a WiFi problem. I also shared my > > wireless connection, but same problem connecting scanner. SyncTru: > > IP-filtering is Disabled > > > > -Olav- > > > > >
My System Specs

12-13-2007	#7 (permalink)
duckworth n/a posts	RE: Network scan, unable to connect Well good luck. I notified Samsung of the problem months ago and they were "aware" of the problem then and I still haven't seen an update yet. "olaveng" wrote: Quote: > Not yet, but engineers of Samsung is informed, hopefully they will return > with a solution shortly. I will post it when accessible. > > -olav- > > "gtm" wrote: > Quote: > > Hi, > > > > I have the same problem as you: wifi network scan with vista does not work. > > Have you found a solution to this problem by now? > > > > Thanks > > gtm > > > > "olaveng" wrote: > > Quote: > > > Thank You for request. Vista Firewall is turned off, and it works > > > network-wired, so I think it must be a WiFi problem. I also shared my > > > wireless connection, but same problem connecting scanner. SyncTru: > > > IP-filtering is Disabled > > > > > > -Olav- > > > > > > > >
My System Specs

Similar Threads
Thread	Forum
Vista 32-bit unable to connect to network	Vista networking & sharing
WiFi, Samsung Network scan, unable to connect	Vista networking & sharing
Unable to connect to network	Vista networking & sharing
unable to connect to network using outlook	Vista mail
Unable to connect to wireless network	Vista networking & sharing