![]() |
![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() |
| Welcome to Windows Vista Forums. Our forum is dedicated to helping you find solutions with any problems, errors or issues you are experiencing with Windows Vista. The Vista forum also covers news and updates and has an extensive Windows Vista tutorial section that covers a wide range of tips and tricks. |
| |||||||
![]() |
| |
| | #1 (permalink) |
| Guest | Problem installing Canon printer in Vista Ultimate 64 bit Just got a new PC with 64 bit Vista Ultimate and am having problems correctly installing a Canon Pixma MP760 multi function printer, scanner copier. I downloaded all the 64 bit drivers from the Canon website and installed them with no problems . Connected the printer and things seemed to go OK. The printer is registered fine in Device Manager under Imaging Devices with Properties saying this device is working properly. I can print OK and copy OK but am struggling with scanning. The canon software to scan is called MP Navigator 1.1 but when I click on the icon to launch I get the error message "The scanner driver supported by this software is not installed, Install it then retry". I try to update the driver software and get the message "Windows has determined the driver software for your device is up to date". So I have no way to amend any scans. I can scan from the printer itself (i.e. not the PC) but this gives for example 4 pages for a simple 1 page original. Have tried ringing Canon but they are a joke. Rang them from work and eventually had to concede and take a day off work to ring in front of the PC at home. Rang them and after 30 mins of a lady who kept putting me on hold and referring to an expert was told this would have to be passed to Level 2 support who would ring me in 2 or 3 days. Told them I work in office hours but they expect me to take a couple of further days off work to wait their call - cheaper to buy a new printer! Have tried the usual of uninstalling the printer and re-installing and also re downloaded the 64 bit software. In "Problem Reports and Solutions" 3 of the canon 64 bit drivers appear including the MP Navigator s/w (m6C18MUx.exe) all with the same message of Program Compatibility Problem. The problem given is Description This program might require administrator privileges (I am the administrator) Problem signature Problem Event Name: PCA2 Problem Signature 01: m6C18MUx.exe Problem Signature 02: 0.0.0.0 Problem Signature 03: m6C18MUx.exe Problem Signature 04: unknown Problem Signature 05: unknown Problem Signature 06: 8 Problem Signature 07: 202 OS Version: 6.0.6001.2.1.0.256.1 Locale ID: 2057 Files that help describe the problem appcompat.txt Attached, Am I flogging a dead horse and is it simply that the scanner drivers (which on the canon website say Windows Vista 64bit) just don't work or is their a solution I'm missing. I can get the scanner to work using Windows Photo Gallery but there are only a few adjustments you can make compared to the canon s/w. Appreciate any help. Cheers Steve |
My System Specs![]() |
| | #2 (permalink) |
| Guest | Re: Problem installing Canon printer in Vista Ultimate 64 bit Did you install MP navigator 1.16? http://www.canon.ca/product_reg.asp?...rt%5Fby%3Ddflt -- Peter Toronto, Canada XP Pro SP2 x 2/Vista Ultimate SP1 Triple Boot "Stephen Flanagan" <stephen.flanagan2@xxxxxx> wrote in message news:%23ixR$MUrIHA.1872@xxxxxx Quote: > Just got a new PC with 64 bit Vista Ultimate and am having problems > correctly installing a Canon Pixma MP760 multi function printer, scanner > copier. I downloaded all the 64 bit drivers from the Canon website and > installed them with no problems . Connected the printer and things seemed > to go OK. The printer is registered fine in Device Manager under Imaging > Devices with Properties saying this device is working properly. > > I can print OK and copy OK but am struggling with scanning. The canon > software to scan is called MP Navigator 1.1 but when I click on the icon > to > launch I get the error message "The scanner driver supported by this > software is not installed, Install it then retry". I try to update the > driver software and get the message "Windows has determined the driver > software for your device is up to date". So I have no way to amend any > scans. I can scan from the printer itself (i.e. not the PC) but this > gives > for example 4 pages for a simple 1 page original. > > Have tried ringing Canon but they are a joke. Rang them from work and > eventually had to concede and take a day off work to ring in front of the > PC > at home. Rang them and after 30 mins of a lady who kept putting me on hold > and referring to an expert was told this would have to be passed to Level > 2 > support who would ring me in 2 or 3 days. Told them I work in office > hours > but they expect me to take a couple of further days off work to wait their > call - cheaper to buy a new printer! > > Have tried the usual of uninstalling the printer and re-installing and > also > re downloaded the 64 bit software. In "Problem Reports and Solutions" 3 > of > the canon 64 bit drivers appear including the MP Navigator s/w > (m6C18MUx.exe) all with the same message of Program Compatibility > Problem. > The problem given is > > Description > This program might require administrator privileges (I am the > administrator) > > Problem signature > Problem Event Name: PCA2 > Problem Signature 01: m6C18MUx.exe > Problem Signature 02: 0.0.0.0 > Problem Signature 03: m6C18MUx.exe > Problem Signature 04: unknown > Problem Signature 05: unknown > Problem Signature 06: 8 > Problem Signature 07: 202 > OS Version: 6.0.6001.2.1.0.256.1 > Locale ID: 2057 > > Files that help describe the problem > appcompat.txt > > Attached, > > Am I flogging a dead horse and is it simply that the scanner drivers > (which > on the canon website say Windows Vista 64bit) just don't work or is their > a > solution I'm missing. > > I can get the scanner to work using Windows Photo Gallery but there are > only > a few adjustments you can make compared to the canon s/w. > > Appreciate any help. > > Cheers > > Steve > |
My System Specs![]() |
| | #3 (permalink) |
| Guest | Re: Problem installing Canon printer in Vista Ultimate 64 bit Peter, Yes I had installed version 1.16 (although the icon on my desktop just says 1.1). I did uninstall and use your link and re-downloaded but still get the same Error Message stating "The scanner driver supported by this software is not installed, Install it then retry". I see from your link that are higher (newer) Vista versions i.e. Vista 64 2.02 tried them but no luck either. Thanks anyway. Steve "Peter" <nobody@xxxxxx> wrote in message news:ekCeh8WrIHA.1436@xxxxxx Quote: > Did you install MP navigator 1.16? > > http://www.canon.ca/product_reg.asp?...rt%5Fby%3Ddflt > > -- > Peter > Toronto, Canada > XP Pro SP2 x 2/Vista Ultimate SP1 > Triple Boot > > "Stephen Flanagan" <stephen.flanagan2@xxxxxx> wrote in message > news:%23ixR$MUrIHA.1872@xxxxxx Quote: >> Just got a new PC with 64 bit Vista Ultimate and am having problems >> correctly installing a Canon Pixma MP760 multi function printer, scanner >> copier. I downloaded all the 64 bit drivers from the Canon website and >> installed them with no problems . Connected the printer and things >> seemed >> to go OK. The printer is registered fine in Device Manager under Imaging >> Devices with Properties saying this device is working properly. >> >> I can print OK and copy OK but am struggling with scanning. The canon >> software to scan is called MP Navigator 1.1 but when I click on the icon >> to >> launch I get the error message "The scanner driver supported by this >> software is not installed, Install it then retry". I try to update the >> driver software and get the message "Windows has determined the driver >> software for your device is up to date". So I have no way to amend any >> scans. I can scan from the printer itself (i.e. not the PC) but this >> gives >> for example 4 pages for a simple 1 page original. >> >> Have tried ringing Canon but they are a joke. Rang them from work and >> eventually had to concede and take a day off work to ring in front of the >> PC >> at home. Rang them and after 30 mins of a lady who kept putting me on >> hold >> and referring to an expert was told this would have to be passed to Level >> 2 >> support who would ring me in 2 or 3 days. Told them I work in office >> hours >> but they expect me to take a couple of further days off work to wait >> their >> call - cheaper to buy a new printer! >> >> Have tried the usual of uninstalling the printer and re-installing and >> also >> re downloaded the 64 bit software. In "Problem Reports and Solutions" 3 >> of >> the canon 64 bit drivers appear including the MP Navigator s/w >> (m6C18MUx.exe) all with the same message of Program Compatibility >> Problem. >> The problem given is >> >> Description >> This program might require administrator privileges (I am the >> administrator) >> >> Problem signature >> Problem Event Name: PCA2 >> Problem Signature 01: m6C18MUx.exe >> Problem Signature 02: 0.0.0.0 >> Problem Signature 03: m6C18MUx.exe >> Problem Signature 04: unknown >> Problem Signature 05: unknown >> Problem Signature 06: 8 >> Problem Signature 07: 202 >> OS Version: 6.0.6001.2.1.0.256.1 >> Locale ID: 2057 >> >> Files that help describe the problem >> appcompat.txt >> >> Attached, >> >> Am I flogging a dead horse and is it simply that the scanner drivers >> (which >> on the canon website say Windows Vista 64bit) just don't work or is >> their a >> solution I'm missing. >> >> I can get the scanner to work using Windows Photo Gallery but there are >> only >> a few adjustments you can make compared to the canon s/w. >> >> Appreciate any help. >> >> Cheers >> >> Steve >> |
My System Specs![]() |
| | #4 (permalink) |
| Guest | Re: Problem installing Canon printer in Vista Ultimate 64 bit I would go back to Canon and hope this time you get someone intelligent. They are usually pretty helpful. -- Peter Toronto, Canada XP Pro SP2 x 2/Vista Ultimate SP1 Triple Boot "Stephen Flanagan" <stephen.flanagan2@xxxxxx> wrote in message news:%23AJebQdrIHA.4280@xxxxxx Quote: > Peter, > > Yes I had installed version 1.16 (although the icon on my desktop just > says 1.1). I did uninstall and use your link and re-downloaded but still > get the same Error Message stating "The scanner driver supported by this > software is not installed, Install it then retry". I see from your link > that are higher (newer) Vista versions i.e. Vista 64 2.02 tried them but > no luck either. > > Thanks anyway. > > Steve > > > > "Peter" <nobody@xxxxxx> wrote in message > news:ekCeh8WrIHA.1436@xxxxxx Quote: >> Did you install MP navigator 1.16? >> >> http://www.canon.ca/product_reg.asp?...rt%5Fby%3Ddflt >> >> -- >> Peter >> Toronto, Canada >> XP Pro SP2 x 2/Vista Ultimate SP1 >> Triple Boot >> >> "Stephen Flanagan" <stephen.flanagan2@xxxxxx> wrote in message >> news:%23ixR$MUrIHA.1872@xxxxxx Quote: >>> Just got a new PC with 64 bit Vista Ultimate and am having problems >>> correctly installing a Canon Pixma MP760 multi function printer, scanner >>> copier. I downloaded all the 64 bit drivers from the Canon website and >>> installed them with no problems . Connected the printer and things >>> seemed >>> to go OK. The printer is registered fine in Device Manager under >>> Imaging >>> Devices with Properties saying this device is working properly. >>> >>> I can print OK and copy OK but am struggling with scanning. The canon >>> software to scan is called MP Navigator 1.1 but when I click on the icon >>> to >>> launch I get the error message "The scanner driver supported by this >>> software is not installed, Install it then retry". I try to update the >>> driver software and get the message "Windows has determined the driver >>> software for your device is up to date". So I have no way to amend any >>> scans. I can scan from the printer itself (i.e. not the PC) but this >>> gives >>> for example 4 pages for a simple 1 page original. >>> >>> Have tried ringing Canon but they are a joke. Rang them from work and >>> eventually had to concede and take a day off work to ring in front of >>> the PC >>> at home. Rang them and after 30 mins of a lady who kept putting me on >>> hold >>> and referring to an expert was told this would have to be passed to >>> Level 2 >>> support who would ring me in 2 or 3 days. Told them I work in office >>> hours >>> but they expect me to take a couple of further days off work to wait >>> their >>> call - cheaper to buy a new printer! >>> >>> Have tried the usual of uninstalling the printer and re-installing and >>> also >>> re downloaded the 64 bit software. In "Problem Reports and Solutions" 3 >>> of >>> the canon 64 bit drivers appear including the MP Navigator s/w >>> (m6C18MUx.exe) all with the same message of Program Compatibility >>> Problem. >>> The problem given is >>> >>> Description >>> This program might require administrator privileges (I am the >>> administrator) >>> >>> Problem signature >>> Problem Event Name: PCA2 >>> Problem Signature 01: m6C18MUx.exe >>> Problem Signature 02: 0.0.0.0 >>> Problem Signature 03: m6C18MUx.exe >>> Problem Signature 04: unknown >>> Problem Signature 05: unknown >>> Problem Signature 06: 8 >>> Problem Signature 07: 202 >>> OS Version: 6.0.6001.2.1.0.256.1 >>> Locale ID: 2057 >>> >>> Files that help describe the problem >>> appcompat.txt >>> >>> Attached, >>> >>> Am I flogging a dead horse and is it simply that the scanner drivers >>> (which >>> on the canon website say Windows Vista 64bit) just don't work or is >>> their a >>> solution I'm missing. >>> >>> I can get the scanner to work using Windows Photo Gallery but there are >>> only >>> a few adjustments you can make compared to the canon s/w. >>> >>> Appreciate any help. >>> >>> Cheers >>> >>> Steve >>> |
My System Specs![]() |
| | #5 (permalink) |
| Guest | Re: Problem installing Canon printer in Vista Ultimate 64 bit Stephen Flanagan;3710363 Wrote: Quote: > Just got a new PC with 64 bit Vista Ultimate and am having problems > correctly installing a Canon Pixma MP760 multi function printer, > scanner > copier. I downloaded all the 64 bit drivers from the Canon website > and > installed them with no problems . Connected the printer and things > seemed > to go OK. The printer is registered fine in Device Manager under > Imaging > Devices with Properties saying this device is working properly. > > I can print OK and copy OK but am struggling with scanning. The canon > software to scan is called MP Navigator 1.1 but when I click on the > icon to > launch I get the error message "The scanner driver supported by this > software is not installed, Install it then retry". I try to update > the > driver software and get the message "Windows has determined the driver > software for your device is up to date". So I have no way to amend > any > scans. I can scan from the printer itself (i.e. not the PC) but this > gives > for example 4 pages for a simple 1 page original. > > Have tried ringing Canon but they are a joke. Rang them from work and > eventually had to concede and take a day off work to ring in front of > the PC > at home. Rang them and after 30 mins of a lady who kept putting me on > hold > and referring to an expert was told this would have to be passed to > Level 2 > support who would ring me in 2 or 3 days. Told them I work in office > hours > but they expect me to take a couple of further days off work to wait > their > call - cheaper to buy a new printer! > > Have tried the usual of uninstalling the printer and re-installing and > also > re downloaded the 64 bit software. In "Problem Reports and Solutions" > 3 of > the canon 64 bit drivers appear including the MP Navigator s/w > (m6C18MUx.exe) all with the same message of Program Compatibility > Problem. > The problem given is > > Description > This program might require administrator privileges (I am the > administrator) > > Problem signature > Problem Event Name: PCA2 > Problem Signature 01: m6C18MUx.exe > Problem Signature 02: 0.0.0.0 > Problem Signature 03: m6C18MUx.exe > Problem Signature 04: unknown > Problem Signature 05: unknown > Problem Signature 06: 8 > Problem Signature 07: 202 > OS Version: 6.0.6001.2.1.0.256.1 > Locale ID: 2057 > > Files that help describe the problem > appcompat.txt > > Attached, > > Am I flogging a dead horse and is it simply that the scanner drivers > (which > on the canon website say Windows Vista 64bit) just don't work or is > their a > solution I'm missing. > > I can get the scanner to work using Windows Photo Gallery but there are > only > a few adjustments you can make compared to the canon s/w. > > Appreciate any help. > > Cheers > > Steve Driver but also the other Canon 64bit Navigator and other drivers avaliable and install... regards carl... -- carlsf ------------------------------------------------------------------------ carlsf's Profile: http://forums.techarena.in/members/carlsf.htm View this thread: http://forums.techarena.in/vista-print-fax/961320.htm http://forums.techarena.in |
My System Specs![]() |
![]() |
| Thread Tools | |
| |
Similar Threads | ||||
| Thread | Forum | |||
| Canon S9000 printer problem | Drivers | |||
| Driver Problem with Canon LBP2900 Printer | Vista hardware & devices | |||
| Installing Driver for Canon MP180 printer in vista - access denied | Vista General | |||
| Re: vista x64 - XPhome x86 Canon printer problem | Vista print fax & scan | |||
| Re: vista x64 - XPhome x86 Canon printer problem | Vista print fax & scan | |||