Windows Vista Forums

Dot Matrix Drivers
  1. #1



    Newbie
    Join Date : Feb 2009
    Posts : 8
    Vista Home Premium
    Local Time: 08:52 AM

    Dot Matrix Drivers

    I am looking for a dot matrix printer and have been told that many do not work on vista. Does anyone know which printers would work on vista?

    I am looking in particular at a Panasonic KX-P2123 or a Epson FX-85


      My System SpecsSystem Spec

  2. #2


    Andrew Rossmann Guest

    Re: Dot Matrix Drivers

    In article <79c1e0ec416d72d34bf3b733a716e97b@xxxxxx-gateway.com>,
    guest@xxxxxx-email.com says...

    >
    > I am looking for a dot matrix printer and have been told that many do
    > not work on vista. Does anyone know which printers would work on vista?
    >
    > I am looking in particular at a Panasonic KX-P2123 or a *Epson FX-85*
    Vista comes with drivers for both of those you mentioned.

    --
    If there is a no_junk in my address, please REMOVE it before replying!
    All junk mail senders will be prosecuted to the fullest extent of the
    law!!
    http://home.att.net/~andyross

      My System SpecsSystem Spec

  3. #3


    LVTravel Guest

    Re: Dot Matrix Drivers



    "aelover77" <guest@xxxxxx-email.com> wrote in message
    news:79c1e0ec416d72d34bf3b733a716e97b@xxxxxx-gateway.com...

    >
    > I am looking for a dot matrix printer and have been told that many do
    > not work on vista. Does anyone know which printers would work on vista?
    >
    > I am looking in particular at a Panasonic KX-P2123 or a *Epson FX-85*
    >
    >
    > --
    > aelover77
    As Andrew stated, there are native drivers in Vista for both printers but
    both printers are, AFAIK, only parallel port printers. You will definitely
    need parallel port capability on your computer to use these printers. Some
    computers, even with the port, are shipped with it turned off in the bios.


      My System SpecsSystem Spec

  4. #4


    Tom Ferguson Guest

    Re: Dot Matrix Drivers

    I believe the Panasonic KX-2123 is supported on Vista 32 and 64 bit with
    "in-box" drivers. I am not sure about the Epson FX-85 itself. I believe
    there is no printer-specific driver but that it is supported by the generic
    Epson FX 80 family driver.

    For a fully supported Epson-
    http://www.epson.ca/cgi-bin/ceStore/...s&oid=34222881

    --

    Tom
    MSMVP 1998-2007


    "aelover77" <guest@xxxxxx-email.com> wrote in message
    news:79c1e0ec416d72d34bf3b733a716e97b@xxxxxx-gateway.com...

    >
    > I am looking for a dot matrix printer and have been told that many do
    > not work on vista. Does anyone know which printers would work on vista?
    >
    > I am looking in particular at a Panasonic KX-P2123 or a *Epson FX-85*
    >
    >
    > --
    > aelover77

      My System SpecsSystem Spec

  5. #5


    Andrew Rossmann Guest

    Re: Dot Matrix Drivers

    In article <ukFDq9bmJHA.1252@xxxxxx>, none@xxxxxx
    says...

    > As Andrew stated, there are native drivers in Vista for both printers but
    > both printers are, AFAIK, only parallel port printers. You will definitely
    > need parallel port capability on your computer to use these printers. Some
    > computers, even with the port, are shipped with it turned off in the bios.
    There are USB-to-parallel adapters. I'd think with basic, non-PnP DM
    printers and stock MS drivers, they should work fine.

    --
    If there is a no_junk in my address, please REMOVE it before replying!
    All junk mail senders will be prosecuted to the fullest extent of the
    law!!
    http://home.att.net/~andyross

      My System SpecsSystem Spec

Dot Matrix Drivers problems?

Similar Threads
Thread Thread Starter Forum Replies Last Post
Dot Matrix Drivers aelover77 Drivers 1 01 Mar 2009
RAID Drivers? Intel Matrix? Chipset? mooseman99 Drivers 4 22 Dec 2008
Solved Matrix code bpfeil General Discussion 3 30 Aug 2008
Dot Matrix Printing... Martin S. Vista print fax & scan 3 06 Nov 2007
Re: Upgrade Matrix Question Rick Rogers Vista installation & setup 2 28 Jan 2007