Vista - HP Printer PhotoSmart 8230

Hi,

I have a HP printer Photosmart 8230 and the very first time when I connected
the USB port to my laptop, it worked. However, after that, everytime when I
power up my laptop, an error would appear says the printer spooler is
stopped.

I went to the printer folder and realized that it's empty. So, I tried to
add a new printer. However, every single time when I tried to go through the
process, I am getting that error message about the spooler ever step away.
If I keeps restarting the spooler, eventually, I'll get the error message
saying the driver doesn't exist with the error code: 0x000006be.

I've talked to HP tech support and they suggested it is a Windows problem. I
have Vista Home Premium.

I need my printer, so, anyone has any idea how to fix this problem?

You just connected the printer to the notebook without installing any
software?

Uninstall and reinstall it, by following the directions at:
http://www.coribright.com/windows/Article_One.htm

(originally written for XP but it's the same procedure in Vista)

Updated software can be found at:
http://h10025.www1.hp.com/ewfrf/wc/s...468827&lang=en
--
Cari (MS-MVP)
Windows Technologies - Printing & Imaging
http://www.coribright.com/windows

"Cindy" <c.tsao@hotmail.com> wrote in message
news:OHE9hTLfHHA.4552@TK2MSFTNGP04.phx.gbl...
> Hi,
>
> I have a HP printer Photosmart 8230 and the very first time when I
> connected
> the USB port to my laptop, it worked. However, after that, everytime when
> I
> power up my laptop, an error would appear says the printer spooler is
> stopped.
>
> I went to the printer folder and realized that it's empty. So, I tried to
> add a new printer. However, every single time when I tried to go through
> the
> process, I am getting that error message about the spooler ever step away.
> If I keeps restarting the spooler, eventually, I'll get the error message
> saying the driver doesn't exist with the error code: 0x000006be.
>
> I've talked to HP tech support and they suggested it is a Windows problem.
> I
> have Vista Home Premium.
>
> I need my printer, so, anyone has any idea how to fix this problem?
>
>

I followed your instruction and it is still not working. While installing
the new driver, I got error messages saying the driver wasn't installed
correctly. The good news is, after I uninstall the driver and reinstall it
again, I connected the printer through the USB port as instructed. Vista
actually detected the new device, which is the first time since I was
getting all the error from the spooler before. However, the installation of
the driver still failed and I still can't use my printer and the spooler
stopped error message starts to appearing all over again.

Anything else I can do at this point?


"Cari (MS-MVP)" <NewsGroups@coribright.com> wrote in message
news:%23LRH%23dffHHA.3676@TK2MSFTNGP05.phx.gbl...
> You just connected the printer to the notebook without installing any
> software?
>
> Uninstall and reinstall it, by following the directions at:
> http://www.coribright.com/windows/Article_One.htm
>
> (originally written for XP but it's the same procedure in Vista)
>
> Updated software can be found at:
>
http://h10025.www1.hp.com/ewfrf/wc/s...468827&lang=en
> --
> Cari (MS-MVP)
> Windows Technologies - Printing & Imaging
> http://www.coribright.com/windows
>
> "Cindy" <c.tsao@hotmail.com> wrote in message
> news:OHE9hTLfHHA.4552@TK2MSFTNGP04.phx.gbl...
> > Hi,
> >
> > I have a HP printer Photosmart 8230 and the very first time when I
> > connected
> > the USB port to my laptop, it worked. However, after that, everytime
when
> > I
> > power up my laptop, an error would appear says the printer spooler is
> > stopped.
> >
> > I went to the printer folder and realized that it's empty. So, I tried
to
> > add a new printer. However, every single time when I tried to go through
> > the
> > process, I am getting that error message about the spooler ever step
away.
> > If I keeps restarting the spooler, eventually, I'll get the error
message
> > saying the driver doesn't exist with the error code: 0x000006be.
> >
> > I've talked to HP tech support and they suggested it is a Windows
problem.
> > I
> > have Vista Home Premium.
> >
> > I need my printer, so, anyone has any idea how to fix this problem?
> >
> >
>

You have corrupted printer drivers in there somewhere..... and that's is
causing the spooler to fail. Does HP have an uninstall utility on their
website?
--
Cari (MS-MVP)
Windows Technologies - Printing & Imaging
http://www.coribright.com/windows

"Cindy" <c.tsao@hotmail.com> wrote in message
news:%235oEpg8fHHA.668@TK2MSFTNGP05.phx.gbl...
>I followed your instruction and it is still not working. While installing
> the new driver, I got error messages saying the driver wasn't installed
> correctly. The good news is, after I uninstall the driver and reinstall it
> again, I connected the printer through the USB port as instructed. Vista
> actually detected the new device, which is the first time since I was
> getting all the error from the spooler before. However, the installation
> of
> the driver still failed and I still can't use my printer and the spooler
> stopped error message starts to appearing all over again.
>
> Anything else I can do at this point?
>
>
> "Cari (MS-MVP)" <NewsGroups@coribright.com> wrote in message
> news:%23LRH%23dffHHA.3676@TK2MSFTNGP05.phx.gbl...
>> You just connected the printer to the notebook without installing any
>> software?
>>
>> Uninstall and reinstall it, by following the directions at:
>> http://www.coribright.com/windows/Article_One.htm
>>
>> (originally written for XP but it's the same procedure in Vista)
>>
>> Updated software can be found at:
>>
> http://h10025.www1.hp.com/ewfrf/wc/s...468827&lang=en
>> --
>> Cari (MS-MVP)
>> Windows Technologies - Printing & Imaging
>> http://www.coribright.com/windows
>>
>> "Cindy" <c.tsao@hotmail.com> wrote in message
>> news:OHE9hTLfHHA.4552@TK2MSFTNGP04.phx.gbl...
>> > Hi,
>> >
>> > I have a HP printer Photosmart 8230 and the very first time when I
>> > connected
>> > the USB port to my laptop, it worked. However, after that, everytime
> when
>> > I
>> > power up my laptop, an error would appear says the printer spooler is
>> > stopped.
>> >
>> > I went to the printer folder and realized that it's empty. So, I tried
> to
>> > add a new printer. However, every single time when I tried to go
>> > through
>> > the
>> > process, I am getting that error message about the spooler ever step
> away.
>> > If I keeps restarting the spooler, eventually, I'll get the error
> message
>> > saying the driver doesn't exist with the error code: 0x000006be.
>> >
>> > I've talked to HP tech support and they suggested it is a Windows
> problem.
>> > I
>> > have Vista Home Premium.
>> >
>> > I need my printer, so, anyone has any idea how to fix this problem?
>> >
>> >
>>
>
>

In article <#5oEpg8fHHA.668@TK2MSFTNGP05.phx.gbl>, Cindy wrote:

> While installing
> the new driver, I got error messages saying the driver wasn't installed
> correctly.

BTW -- I don't know a PS 8230 -- is that a typo? -- I have a PS 8250.

Did you download the full software package from:

http://h10025.www1.hp.com/ewfrf/wc/s...=2093&software
item=ps-48177-1&lc=en&cc=us&dlc=en&product=443024&lang=en

If so uninstall everything using the Add/Remove Programs (whatever it is
called in VISTA) in Control Panel and delete the icon from Control Panel
/ Printers. Then reboot with neither the printer nor the USB cable
connected to the PC and with the printer turned off.

Find the downloaded file from HP

SF_CDD_Full_Non-Network_enu.exe 1/1 (67.39M)

and right mouse click on this exe file. Then select Run as Administrator
and OK your way out.

I've done that for my PS8250 with that file and it installed fine and
VISTA found the printer and set it up.

Note that you may, while the HP Installation procedure is running, get
Windows Installer popping up and offering to install the drivers. Do not
accept this offer but get rid of the Windows Installer and let the HP one
continue to do its job -- I may have run into this because I forget to
unplug the USB cable so you may not encounter it.

At some point the HP installation should either come to [Finish] or tell
you to connect the printer and its cable -- do whatever it tells you.

Hope that works for you.