Windows Vista Forums

Lexmark x1185 install on Vista Home Basic

  1. #1


    JohnH Guest

    Lexmark x1185 install on Vista Home Basic

    First install caused stopped spooler. Got spooler running ok with sc-config
    command. Then reinstall with driver cjrx1100en from Lexmark. Now printer
    prints ok, but can't scan. All in one page won't come up-error message
    lxbkaiox.exe stopped.



    Same printer is installed on another machine running Vista Home Premium,
    works fine .

    JohnH


      My System SpecsSystem Spec

  2. #2


    JohnH Guest

    Re: Lexmark x1185 install on Vista Home Basic

    Further exploring revealed a service listing of lexbce server ,which was
    stopped and can't start because the .exe file it is pointing to doesn't
    exist. Could this be the problem? I'm not familiar with regedit enough to
    use it without guidence.

    Any help is appreciated , John H.



      My System SpecsSystem Spec

  3. #3


    Cari \(MS-MVP\) Guest

    Re: Lexmark x1185 install on Vista Home Basic

    Steps 15 through 17 at
    http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

    (No need to go into the registry)
    --
    Cari (MS-MVP)
    Windows Technologies - Printing & Imaging
    http://www.coribright.com/windows

    "JohnH" <johnh@xxxxxx> wrote in message
    news:OsyOwxD7HHA.1188@xxxxxx

    > Further exploring revealed a service listing of lexbce server ,which was
    > stopped and can't start because the .exe file it is pointing to doesn't
    > exist. Could this be the problem? I'm not familiar with regedit enough to
    > use it without guidence.
    >
    > Any help is appreciated , John H.
    >
    >

      My System SpecsSystem Spec

  4. #4


    JohnH Guest

    Re: Lexmark x1185 install on Vista Home Basic

    Thanks for the reply.

    The reference you gave me is what I used to get the spooler going again.
    Problem now is that the scaner won't scan. It appears to be ok in control
    panel> scanners and cameras.

    When trying to load all in one center page, get error message ,Runtime Error
    program c:\program files\lexmark x1100 series\lxbkaiox.exe
    aioc exe has stopped working

    Also wondering if services listing , lexbce server , has any effect on
    scanner.
    The server listing can't be started because it points to file c\windows
    \system32\lexbces.exe . Which windows can't find.

    Would restoring system to factory default ,and starting over work?

    John H.


    "Cari (MS-MVP)" <NewsGroups@xxxxxx> wrote in message
    news:uVU5SPM7HHA.4304@xxxxxx

    > Steps 15 through 17 at
    > http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm
    >
    > (No need to go into the registry)
    > --
    > Cari (MS-MVP)
    > Windows Technologies - Printing & Imaging
    > http://www.coribright.com/windows
    >
    > "JohnH" <johnh@xxxxxx> wrote in message
    > news:OsyOwxD7HHA.1188@xxxxxx

    >> Further exploring revealed a service listing of lexbce server ,which was
    >> stopped and can't start because the .exe file it is pointing to doesn't
    >> exist. Could this be the problem? I'm not familiar with regedit enough to
    >> use it without guidence.
    >>
    >> Any help is appreciated , John H.
    >>
    >>
    >

      My System SpecsSystem Spec

  5. #5


    Cari \(MS-MVP\) Guest

    Re: Lexmark x1185 install on Vista Home Basic

    Does Lexmark have an Uninstall Utility on their website for this unit?

    Restoring to factory default would help, but it will also destroy any and
    all files and folders you have put on your PC... documents, MP3s, videos,
    everything you have installed and/or created. So if you do use it, backup
    anything you want/need to keep FIRST.
    --
    Cari (MS-MVP)
    Windows Technologies - Printing & Imaging
    http://www.coribright.com/windows

    "JohnH" <johnh@xxxxxx> wrote in message
    news:uAkh20M7HHA.1208@xxxxxx

    > Thanks for the reply.
    >
    > The reference you gave me is what I used to get the spooler going again.
    > Problem now is that the scaner won't scan. It appears to be ok in control
    > panel> scanners and cameras.
    >
    > When trying to load all in one center page, get error message ,Runtime
    > Error
    > program c:\program files\lexmark x1100 series\lxbkaiox.exe
    > aioc exe has stopped working
    >
    > Also wondering if services listing , lexbce server , has any effect on
    > scanner.
    > The server listing can't be started because it points to file c\windows
    > \system32\lexbces.exe . Which windows can't find.
    >
    > Would restoring system to factory default ,and starting over work?
    >
    > John H.
    >
    >
    > "Cari (MS-MVP)" <NewsGroups@xxxxxx> wrote in message
    > news:uVU5SPM7HHA.4304@xxxxxx

    >> Steps 15 through 17 at
    >> http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm
    >>
    >> (No need to go into the registry)
    >> --
    >> Cari (MS-MVP)
    >> Windows Technologies - Printing & Imaging
    >> http://www.coribright.com/windows
    >>
    >> "JohnH" <johnh@xxxxxx> wrote in message
    >> news:OsyOwxD7HHA.1188@xxxxxx

    >>> Further exploring revealed a service listing of lexbce server ,which was
    >>> stopped and can't start because the .exe file it is pointing to doesn't
    >>> exist. Could this be the problem? I'm not familiar with regedit enough
    >>> to use it without guidence.
    >>>
    >>> Any help is appreciated , John H.
    >>>
    >>>
    >>
    >

      My System SpecsSystem Spec

  6. #6


    JohnH Guest

    Re: Lexmark x1185 install on Vista Home Basic



    Lexmark has Vistaclean1100,which didn't work any better than normal
    uninstall.
    They also have Vistareg, which basically says:
    disconnect usb
    uninstall
    reboot
    empty recycle
    reboot
    go to regedit
    find HKEY_LOCAL-MACHINE\Software\Lexmark
    delete lexmark key
    reboot
    install with new driver waiting for usb plug in prompt

    I tried it ,but machine wouldn't let me delete Lexmark Key.

    John H


    "Cari (MS-MVP)" <NewsGroups@xxxxxx> wrote in message
    news:u0qI4xN7HHA.5984@xxxxxx

    > Does Lexmark have an Uninstall Utility on their website for this unit?
    >
    > Restoring to factory default would help, but it will also destroy any and
    > all files and folders you have put on your PC... documents, MP3s, videos,
    > everything you have installed and/or created. So if you do use it, backup
    > anything you want/need to keep FIRST.
    > --
    > Cari (MS-MVP)
    > Windows Technologies - Printing & Imaging
    > http://www.coribright.com/windows
    >
    > "JohnH" <johnh@xxxxxx> wrote in message
    > news:uAkh20M7HHA.1208@xxxxxx

    >> Thanks for the reply.
    >>
    >> The reference you gave me is what I used to get the spooler going again.
    >> Problem now is that the scaner won't scan. It appears to be ok in control
    >> panel> scanners and cameras.
    >>
    >> When trying to load all in one center page, get error message ,Runtime
    >> Error
    >> program c:\program files\lexmark x1100 series\lxbkaiox.exe
    >> aioc exe has stopped working
    >>
    >> Also wondering if services listing , lexbce server , has any effect on
    >> scanner.
    >> The server listing can't be started because it points to file c\windows
    >> \system32\lexbces.exe . Which windows can't find.
    >>
    >> Would restoring system to factory default ,and starting over work?
    >>
    >> John H.
    >>
    >>
    >> "Cari (MS-MVP)" <NewsGroups@xxxxxx> wrote in message
    >> news:uVU5SPM7HHA.4304@xxxxxx

    >>> Steps 15 through 17 at
    >>> http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm
    >>>
    >>> (No need to go into the registry)
    >>> --
    >>> Cari (MS-MVP)
    >>> Windows Technologies - Printing & Imaging
    >>> http://www.coribright.com/windows
    >>>
    >>> "JohnH" <johnh@xxxxxx> wrote in message
    >>> news:OsyOwxD7HHA.1188@xxxxxx
    >>>> Further exploring revealed a service listing of lexbce server ,which
    >>>> was stopped and can't start because the .exe file it is pointing to
    >>>> doesn't exist. Could this be the problem? I'm not familiar with regedit
    >>>> enough to use it without guidence.
    >>>>
    >>>> Any help is appreciated , John H.
    >>>>
    >>>>
    >>>
    >>
    >

      My System SpecsSystem Spec

  7. #7


    Cal Bear '66 Guest

    Re: Lexmark x1185 install on Vista Home Basic

    Have you tried to run regedit "elevated"? (Type regedit in the Start Search box
    above the Start Orb and when regedit.exe appears at the top of the Start Menu,
    right click it and select "Run as Administrator".)

    --
    I Bleed Blue and Gold
    GO BEARS!


    "JohnH" <johnh@xxxxxx> wrote in message
    news:eQ4nkDO7HHA.5752@xxxxxx

    >
    >
    > Lexmark has Vistaclean1100,which didn't work any better than normal uninstall.
    > They also have Vistareg, which basically says:
    > disconnect usb
    > uninstall
    > reboot
    > empty recycle
    > reboot
    > go to regedit
    > find HKEY_LOCAL-MACHINE\Software\Lexmark
    > delete lexmark key
    > reboot
    > install with new driver waiting for usb plug in prompt
    >
    > I tried it ,but machine wouldn't let me delete Lexmark Key.
    >
    > John H
    >
    >
    > "Cari (MS-MVP)" <NewsGroups@xxxxxx> wrote in message
    > news:u0qI4xN7HHA.5984@xxxxxx

    >> Does Lexmark have an Uninstall Utility on their website for this unit?
    >>
    >> Restoring to factory default would help, but it will also destroy any and all
    >> files and folders you have put on your PC... documents, MP3s, videos,
    >> everything you have installed and/or created. So if you do use it, backup
    >> anything you want/need to keep FIRST.
    >> --
    >> Cari (MS-MVP)
    >> Windows Technologies - Printing & Imaging
    >> http://www.coribright.com/windows
    >>
    >> "JohnH" <johnh@xxxxxx> wrote in message
    >> news:uAkh20M7HHA.1208@xxxxxx

    >>> Thanks for the reply.
    >>>
    >>> The reference you gave me is what I used to get the spooler going again.
    >>> Problem now is that the scaner won't scan. It appears to be ok in control
    >>> panel> scanners and cameras.
    >>>
    >>> When trying to load all in one center page, get error message ,Runtime Error
    >>> program c:\program files\lexmark x1100 series\lxbkaiox.exe
    >>> aioc exe has stopped working
    >>>
    >>> Also wondering if services listing , lexbce server , has any effect on
    >>> scanner.
    >>> The server listing can't be started because it points to file c\windows
    >>> \system32\lexbces.exe . Which windows can't find.
    >>>
    >>> Would restoring system to factory default ,and starting over work?
    >>>
    >>> John H.
    >>>
    >>>
    >>> "Cari (MS-MVP)" <NewsGroups@xxxxxx> wrote in message
    >>> news:uVU5SPM7HHA.4304@xxxxxx
    >>>> Steps 15 through 17 at
    >>>> http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm
    >>>>
    >>>> (No need to go into the registry)
    >>>> --
    >>>> Cari (MS-MVP)
    >>>> Windows Technologies - Printing & Imaging
    >>>> http://www.coribright.com/windows
    >>>>
    >>>> "JohnH" <johnh@xxxxxx> wrote in message
    >>>> news:OsyOwxD7HHA.1188@xxxxxx
    >>>>> Further exploring revealed a service listing of lexbce server ,which was
    >>>>> stopped and can't start because the .exe file it is pointing to doesn't
    >>>>> exist. Could this be the problem? I'm not familiar with regedit enough to
    >>>>> use it without guidence.
    >>>>>
    >>>>> Any help is appreciated , John H.
    >>>>>
    >>>>>
    >>>>
    >>>
    >>
    >


      My System SpecsSystem Spec

  8. #8


    JohnH Guest

    Re: Lexmark x1185 install on Vista Home Basic

    No, I haven't done it that way, Cal.
    I clicked on start>run>and typed in regedit. Below the box it said "this
    task will be created with administrative privileges". Should be the same?

    John H.


    "Cal Bear '66" <xxx@xxxxxx> wrote in message
    news:5CCC9AC1-3571-42A6-9718-492CBB0D2B4E@xxxxxx

    > Have you tried to run regedit "elevated"? (Type regedit in the Start
    > Search box above the Start Orb and when regedit.exe appears at the top of
    > the Start Menu, right click it and select "Run as Administrator".)
    >
    > --
    > I Bleed Blue and Gold
    > GO BEARS!
    >
    >
    > "JohnH" <johnh@xxxxxx> wrote in message
    > news:eQ4nkDO7HHA.5752@xxxxxx

    >>
    >>
    >> Lexmark has Vistaclean1100,which didn't work any better than normal
    >> uninstall.
    >> They also have Vistareg, which basically says:
    >> disconnect usb
    >> uninstall
    >> reboot
    >> empty recycle
    >> reboot
    >> go to regedit
    >> find HKEY_LOCAL-MACHINE\Software\Lexmark
    >> delete lexmark key
    >> reboot
    >> install with new driver waiting for usb plug in prompt
    >>
    >> I tried it ,but machine wouldn't let me delete Lexmark Key.
    >>
    >> John H
    >>
    >>
    >> "Cari (MS-MVP)" <NewsGroups@xxxxxx> wrote in message
    >> news:u0qI4xN7HHA.5984@xxxxxx

    >>> Does Lexmark have an Uninstall Utility on their website for this unit?
    >>>
    >>> Restoring to factory default would help, but it will also destroy any
    >>> and all files and folders you have put on your PC... documents, MP3s,
    >>> videos, everything you have installed and/or created. So if you do use
    >>> it, backup anything you want/need to keep FIRST.
    >>> --
    >>> Cari (MS-MVP)
    >>> Windows Technologies - Printing & Imaging
    >>> http://www.coribright.com/windows
    >>>
    >>> "JohnH" <johnh@xxxxxx> wrote in message
    >>> news:uAkh20M7HHA.1208@xxxxxx
    >>>> Thanks for the reply.
    >>>>
    >>>> The reference you gave me is what I used to get the spooler going
    >>>> again. Problem now is that the scaner won't scan. It appears to be ok
    >>>> in control panel> scanners and cameras.
    >>>>
    >>>> When trying to load all in one center page, get error message ,Runtime
    >>>> Error
    >>>> program c:\program files\lexmark x1100 series\lxbkaiox.exe
    >>>> aioc exe has stopped working
    >>>>
    >>>> Also wondering if services listing , lexbce server , has any effect on
    >>>> scanner.
    >>>> The server listing can't be started because it points to file c\windows
    >>>> \system32\lexbces.exe . Which windows can't find.
    >>>>
    >>>> Would restoring system to factory default ,and starting over work?
    >>>>
    >>>> John H.
    >>>>
    >>>>
    >>>> "Cari (MS-MVP)" <NewsGroups@xxxxxx> wrote in message
    >>>> news:uVU5SPM7HHA.4304@xxxxxx
    >>>>> Steps 15 through 17 at
    >>>>> http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm
    >>>>>
    >>>>> (No need to go into the registry)
    >>>>> --
    >>>>> Cari (MS-MVP)
    >>>>> Windows Technologies - Printing & Imaging
    >>>>> http://www.coribright.com/windows
    >>>>>
    >>>>> "JohnH" <johnh@xxxxxx> wrote in message
    >>>>> news:OsyOwxD7HHA.1188@xxxxxx
    >>>>>> Further exploring revealed a service listing of lexbce server ,which
    >>>>>> was stopped and can't start because the .exe file it is pointing to
    >>>>>> doesn't exist. Could this be the problem? I'm not familiar with
    >>>>>> regedit enough to use it without guidence.
    >>>>>>
    >>>>>> Any help is appreciated , John H.
    >>>>>>
    >>>>>>
    >>>>>
    >>>>
    >>>
    >>
    >
    >

      My System SpecsSystem Spec

  9. #9


    Cal Bear '66 Guest

    Re: Lexmark x1185 install on Vista Home Basic

    Try it the way I suggested. Run regedit.exe "elevated", that is right click and
    select "Run as Administrator". bypass the Run box.

    --
    I Bleed Blue and Gold
    GO BEARS!


    "JohnH" <johnh@xxxxxx> wrote in message
    news:e%23oMl0W7HHA.4436@xxxxxx

    > No, I haven't done it that way, Cal.
    > I clicked on start>run>and typed in regedit. Below the box it said "this task
    > will be created with administrative privileges". Should be the same?
    >
    > John H.
    >
    >
    > "Cal Bear '66" <xxx@xxxxxx> wrote in message
    > news:5CCC9AC1-3571-42A6-9718-492CBB0D2B4E@xxxxxx

    >> Have you tried to run regedit "elevated"? (Type regedit in the Start Search
    >> box above the Start Orb and when regedit.exe appears at the top of the Start
    >> Menu, right click it and select "Run as Administrator".)
    >>
    >> --
    >> I Bleed Blue and Gold
    >> GO BEARS!
    >>
    >>
    >> "JohnH" <johnh@xxxxxx> wrote in message
    >> news:eQ4nkDO7HHA.5752@xxxxxx

    >>>
    >>>
    >>> Lexmark has Vistaclean1100,which didn't work any better than normal
    >>> uninstall.
    >>> They also have Vistareg, which basically says:
    >>> disconnect usb
    >>> uninstall
    >>> reboot
    >>> empty recycle
    >>> reboot
    >>> go to regedit
    >>> find HKEY_LOCAL-MACHINE\Software\Lexmark
    >>> delete lexmark key
    >>> reboot
    >>> install with new driver waiting for usb plug in prompt
    >>>
    >>> I tried it ,but machine wouldn't let me delete Lexmark Key.
    >>>
    >>> John H
    >>>
    >>>
    >>> "Cari (MS-MVP)" <NewsGroups@xxxxxx> wrote in message
    >>> news:u0qI4xN7HHA.5984@xxxxxx
    >>>> Does Lexmark have an Uninstall Utility on their website for this unit?
    >>>>
    >>>> Restoring to factory default would help, but it will also destroy any and
    >>>> all files and folders you have put on your PC... documents, MP3s, videos,
    >>>> everything you have installed and/or created. So if you do use it, backup
    >>>> anything you want/need to keep FIRST.
    >>>> --
    >>>> Cari (MS-MVP)
    >>>> Windows Technologies - Printing & Imaging
    >>>> http://www.coribright.com/windows
    >>>>
    >>>> "JohnH" <johnh@xxxxxx> wrote in message
    >>>> news:uAkh20M7HHA.1208@xxxxxx
    >>>>> Thanks for the reply.
    >>>>>
    >>>>> The reference you gave me is what I used to get the spooler going again.
    >>>>> Problem now is that the scaner won't scan. It appears to be ok in control
    >>>>> panel> scanners and cameras.
    >>>>>
    >>>>> When trying to load all in one center page, get error message ,Runtime
    >>>>> Error
    >>>>> program c:\program files\lexmark x1100 series\lxbkaiox.exe
    >>>>> aioc exe has stopped working
    >>>>>
    >>>>> Also wondering if services listing , lexbce server , has any effect on
    >>>>> scanner.
    >>>>> The server listing can't be started because it points to file c\windows
    >>>>> \system32\lexbces.exe . Which windows can't find.
    >>>>>
    >>>>> Would restoring system to factory default ,and starting over work?
    >>>>>
    >>>>> John H.
    >>>>>
    >>>>>
    >>>>> "Cari (MS-MVP)" <NewsGroups@xxxxxx> wrote in message
    >>>>> news:uVU5SPM7HHA.4304@xxxxxx
    >>>>>> Steps 15 through 17 at
    >>>>>> http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm
    >>>>>>
    >>>>>> (No need to go into the registry)
    >>>>>> --
    >>>>>> Cari (MS-MVP)
    >>>>>> Windows Technologies - Printing & Imaging
    >>>>>> http://www.coribright.com/windows
    >>>>>>
    >>>>>> "JohnH" <johnh@xxxxxx> wrote in message
    >>>>>> news:OsyOwxD7HHA.1188@xxxxxx
    >>>>>>> Further exploring revealed a service listing of lexbce server ,which was
    >>>>>>> stopped and can't start because the .exe file it is pointing to doesn't
    >>>>>>> exist. Could this be the problem? I'm not familiar with regedit enough
    >>>>>>> to use it without guidence.
    >>>>>>>
    >>>>>>> Any help is appreciated , John H.
    >>>>>>>
    >>>>>>>
    >>>>>>
    >>>>>
    >>>>
    >>>
    >>
    >>
    >


      My System SpecsSystem Spec

  10. #10


    JohnH Guest

    Re: Lexmark x1185 install on Vista Home Basic

    I tried it the way you suggested. Got message" cannot delete lexmark:error
    while deleting key". I believe that's the same message I got before. I guess
    it wasn't that it wouldn't let me,but couldn't do it.

    John H.

    "Cal Bear '66" <xxx@xxxxxx> wrote in message
    news:37ED3278-458E-4642-B1F1-7E43E573BE04@xxxxxx

    > Try it the way I suggested. Run regedit.exe "elevated", that is right
    > click and select "Run as Administrator". bypass the Run box.
    >
    > --
    > I Bleed Blue and Gold
    > GO BEARS!
    >
    >
    > "JohnH" <johnh@xxxxxx> wrote in message
    > news:e%23oMl0W7HHA.4436@xxxxxx

    >> No, I haven't done it that way, Cal.
    >> I clicked on start>run>and typed in regedit. Below the box it said "this
    >> task will be created with administrative privileges". Should be the same?
    >>
    >> John H.
    >>
    >>
    >> "Cal Bear '66" <xxx@xxxxxx> wrote in message
    >> news:5CCC9AC1-3571-42A6-9718-492CBB0D2B4E@xxxxxx

    >>> Have you tried to run regedit "elevated"? (Type regedit in the Start
    >>> Search box above the Start Orb and when regedit.exe appears at the top
    >>> of the Start Menu, right click it and select "Run as Administrator".)
    >>>
    >>> --
    >>> I Bleed Blue and Gold
    >>> GO BEARS!
    >>>
    >>>
    >>> "JohnH" <johnh@xxxxxx> wrote in message
    >>> news:eQ4nkDO7HHA.5752@xxxxxx
    >>>>
    >>>>
    >>>> Lexmark has Vistaclean1100,which didn't work any better than normal
    >>>> uninstall.
    >>>> They also have Vistareg, which basically says:
    >>>> disconnect usb
    >>>> uninstall
    >>>> reboot
    >>>> empty recycle
    >>>> reboot
    >>>> go to regedit
    >>>> find HKEY_LOCAL-MACHINE\Software\Lexmark
    >>>> delete lexmark key
    >>>> reboot
    >>>> install with new driver waiting for usb plug in prompt
    >>>>
    >>>> I tried it ,but machine wouldn't let me delete Lexmark Key.
    >>>>
    >>>> John H
    >>>>
    >>>>
    >>>> "Cari (MS-MVP)" <NewsGroups@xxxxxx> wrote in message
    >>>> news:u0qI4xN7HHA.5984@xxxxxx
    >>>>> Does Lexmark have an Uninstall Utility on their website for this unit?
    >>>>>
    >>>>> Restoring to factory default would help, but it will also destroy any
    >>>>> and all files and folders you have put on your PC... documents, MP3s,
    >>>>> videos, everything you have installed and/or created. So if you do
    >>>>> use it, backup anything you want/need to keep FIRST.
    >>>>> --
    >>>>> Cari (MS-MVP)
    >>>>> Windows Technologies - Printing & Imaging
    >>>>> http://www.coribright.com/windows
    >>>>>
    >>>>> "JohnH" <johnh@xxxxxx> wrote in message
    >>>>> news:uAkh20M7HHA.1208@xxxxxx
    >>>>>> Thanks for the reply.
    >>>>>>
    >>>>>> The reference you gave me is what I used to get the spooler going
    >>>>>> again. Problem now is that the scaner won't scan. It appears to be ok
    >>>>>> in control panel> scanners and cameras.
    >>>>>>
    >>>>>> When trying to load all in one center page, get error message
    >>>>>> ,Runtime Error
    >>>>>> program c:\program files\lexmark x1100 series\lxbkaiox.exe
    >>>>>> aioc exe has stopped working
    >>>>>>
    >>>>>> Also wondering if services listing , lexbce server , has any effect
    >>>>>> on scanner.
    >>>>>> The server listing can't be started because it points to file
    >>>>>> c\windows \system32\lexbces.exe . Which windows can't find.
    >>>>>>
    >>>>>> Would restoring system to factory default ,and starting over work?
    >>>>>>
    >>>>>> John H.
    >>>>>>
    >>>>>>
    >>>>>> "Cari (MS-MVP)" <NewsGroups@xxxxxx> wrote in message
    >>>>>> news:uVU5SPM7HHA.4304@xxxxxx
    >>>>>>> Steps 15 through 17 at
    >>>>>>> http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm
    >>>>>>>
    >>>>>>> (No need to go into the registry)
    >>>>>>> --
    >>>>>>> Cari (MS-MVP)
    >>>>>>> Windows Technologies - Printing & Imaging
    >>>>>>> http://www.coribright.com/windows
    >>>>>>>
    >>>>>>> "JohnH" <johnh@xxxxxx> wrote in message
    >>>>>>> news:OsyOwxD7HHA.1188@xxxxxx
    >>>>>>>> Further exploring revealed a service listing of lexbce server
    >>>>>>>> ,which was stopped and can't start because the .exe file it is
    >>>>>>>> pointing to doesn't exist. Could this be the problem? I'm not
    >>>>>>>> familiar with regedit enough to use it without guidence.
    >>>>>>>>
    >>>>>>>> Any help is appreciated , John H.
    >>>>>>>>
    >>>>>>>>
    >>>>>>>
    >>>>>>
    >>>>>
    >>>>
    >>>
    >>>
    >>
    >
    >

      My System SpecsSystem Spec

Page 1 of 2 12 LastLast
Lexmark x1185 install on Vista Home Basic

Similar Threads
Thread Thread Starter Forum Replies Last Post
install vista home premium over basic? chandlerdc Windows Updates 12 07 Oct 2009
Networked Lexmark X1185 Issue fadedrs Network & Sharing 6 13 Jun 2009
Trying to install Vista Home Basic - 64 Bit on boot Adarb Vista installation & setup 3 18 Aug 2008
Problem install. Vista Home Basic Elisa Vista installation & setup 2 19 Nov 2007
Basic set-up of new, clean Vista Home install.... David Morgan \(MAMS\) Vista installation & setup 20 21 Jun 2007