Problem printing in Wireless printer

10-09-2007

Hi

I have a HP PSC-1315 printer connected to the router Asus WL-500GP.

I've installed latest drivers from HP.

The router IP is 192.168.1.1

In Windows XP it all went well (I was able to print with no problems, after
creating a TCP/IP port) but in Vista I can only print half of the first page
I try to print. After that, the printer stops printing and in the printer
icon at the status appear Error...

Then I have to stop de printer spooler and then start it again...

I've tried everything and I can't solve this...

Is there anyone out there that can help me?

Thank you

10-12-2007

No ideas?

"Pedro Sendas Pereira" <sendas@xxxxxx> wrote in message
news:u6tJ5RpCIHA.3712@xxxxxx

	Quote:
	> Hi > > I have a HP PSC-1315 printer connected to the router Asus WL-500GP. > > I've installed latest drivers from HP. > > The router IP is 192.168.1.1 > > In Windows XP it all went well (I was able to print with no problems, > after creating a TCP/IP port) but in Vista I can only print half of the > first page I try to print. After that, the printer stops printing and in > the printer icon at the status appear Error... > > Then I have to stop de printer spooler and then start it again... > > I've tried everything and I can't solve this... > > Is there anyone out there that can help me? > > Thank you >

10-24-2007

I see that there is a lot of people with networking printer problems in
Vista...

Can'y anyone help me please?

Thanks

"Pedro Sendas Pereira" <sendas@xxxxxx> wrote in message
news:ev%23eznODIHA.4196@xxxxxx

Quote:

> No ideas?

>
> "Pedro Sendas Pereira" <sendas@xxxxxx> wrote in message
> news:u6tJ5RpCIHA.3712@xxxxxx

	Quote:
	>> Hi >> >> I have a HP PSC-1315 printer connected to the router Asus WL-500GP. >> >> I've installed latest drivers from HP. >> >> The router IP is 192.168.1.1 >> >> In Windows XP it all went well (I was able to print with no problems, >> after creating a TCP/IP port) but in Vista I can only print half of the >> first page I try to print. After that, the printer stops printing and in >> the printer icon at the status appear Error... >> >> Then I have to stop de printer spooler and then start it again... >> >> I've tried everything and I can't solve this... >> >> Is there anyone out there that can help me? >> >> Thank you >>

>
>

10-24-2007

If bidirectional is enabled, try disabling..

--
Alan Morris
Windows Printing Team
Search the Microsoft Knowledge Base here:
http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto

This posting is provided "AS IS" with no warranties, and confers no rights.

"Pedro Sendas Pereira" <sendas@xxxxxx> wrote in message
news:O$sjYPnFIHA.4476@xxxxxx

Quote:

>I see that there is a lot of people with networking printer problems in
>Vista...
>
> Can'y anyone help me please?

>
> Thanks
>
> "Pedro Sendas Pereira" <sendas@xxxxxx> wrote in message
> news:ev%23eznODIHA.4196@xxxxxx

Quote:

>> No ideas?

>>
>> "Pedro Sendas Pereira" <sendas@xxxxxx> wrote in message
>> news:u6tJ5RpCIHA.3712@xxxxxx

	Quote:
	>>> Hi >>> >>> I have a HP PSC-1315 printer connected to the router Asus WL-500GP. >>> >>> I've installed latest drivers from HP. >>> >>> The router IP is 192.168.1.1 >>> >>> In Windows XP it all went well (I was able to print with no problems, >>> after creating a TCP/IP port) but in Vista I can only print half of the >>> first page I try to print. After that, the printer stops printing and in >>> the printer icon at the status appear Error... >>> >>> Then I have to stop de printer spooler and then start it again... >>> >>> I've tried everything and I can't solve this... >>> >>> Is there anyone out there that can help me? >>> >>> Thank you >>>

>>
>>

>
>

10-25-2007

That doesn't work either... :|

I've been talking to HP but they don't seem to know what is happening...

"Alan Morris [MSFT]" <alanmo@xxxxxx> wrote in message
news:%23gbSM2pFIHA.1316@xxxxxx

Quote:

> If bidirectional is enabled, try disabling..
>
>
>
> --
> Alan Morris
> Windows Printing Team
> Search the Microsoft Knowledge Base here:
> http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto
>
> This posting is provided "AS IS" with no warranties, and confers no
> rights.
>
> "Pedro Sendas Pereira" <sendas@xxxxxx> wrote in message
> news:O$sjYPnFIHA.4476@xxxxxx

Quote:

>>I see that there is a lot of people with networking printer problems in
>>Vista...
>>
>> Can'y anyone help me please?

>>
>> Thanks
>>
>> "Pedro Sendas Pereira" <sendas@xxxxxx> wrote in message
>> news:ev%23eznODIHA.4196@xxxxxx

	Quote:
	>>> No ideas? >>> >>> "Pedro Sendas Pereira" <sendas@xxxxxx> wrote in message >>> news:u6tJ5RpCIHA.3712@xxxxxx >>>> Hi >>>> >>>> I have a HP PSC-1315 printer connected to the router Asus WL-500GP. >>>> >>>> I've installed latest drivers from HP. >>>> >>>> The router IP is 192.168.1.1 >>>> >>>> In Windows XP it all went well (I was able to print with no problems, >>>> after creating a TCP/IP port) but in Vista I can only print half of the >>>> first page I try to print. After that, the printer stops printing and >>>> in the printer icon at the status appear Error... >>>> >>>> Then I have to stop de printer spooler and then start it again... >>>> >>>> I've tried everything and I can't solve this... >>>> >>>> Is there anyone out there that can help me? >>>> >>>> Thank you >>>> >>> >>>

>>
>>

>
>

10-25-2007

How about disabling SNMP on the port configuration.

Is there any HP monitoring software that may need network access to the
device?

--
Alan Morris
Windows Printing Team
Search the Microsoft Knowledge Base here:
http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto

This posting is provided "AS IS" with no warranties, and confers no rights.

"Pedro Sendas Pereira" <sendas@xxxxxx> wrote in message
news:uYDDUnyFIHA.3376@xxxxxx

Quote:

> That doesn't work either... :|
>
> I've been talking to HP but they don't seem to know what is happening...
>
> "Alan Morris [MSFT]" <alanmo@xxxxxx> wrote in message
> news:%23gbSM2pFIHA.1316@xxxxxx

Quote:

>> If bidirectional is enabled, try disabling..
>>
>>
>>
>> --
>> Alan Morris
>> Windows Printing Team
>> Search the Microsoft Knowledge Base here:
>> http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto
>>
>> This posting is provided "AS IS" with no warranties, and confers no
>> rights.
>>
>> "Pedro Sendas Pereira" <sendas@xxxxxx> wrote in message
>> news:O$sjYPnFIHA.4476@xxxxxx

	Quote:
	>>>I see that there is a lot of people with networking printer problems in >>>Vista... >>> >>> Can'y anyone help me please? >>> >>> Thanks >>> >>> "Pedro Sendas Pereira" <sendas@xxxxxx> wrote in message >>> news:ev%23eznODIHA.4196@xxxxxx >>>> No ideas? >>>> >>>> "Pedro Sendas Pereira" <sendas@xxxxxx> wrote in message >>>> news:u6tJ5RpCIHA.3712@xxxxxx >>>>> Hi >>>>> >>>>> I have a HP PSC-1315 printer connected to the router Asus WL-500GP. >>>>> >>>>> I've installed latest drivers from HP. >>>>> >>>>> The router IP is 192.168.1.1 >>>>> >>>>> In Windows XP it all went well (I was able to print with no problems, >>>>> after creating a TCP/IP port) but in Vista I can only print half of >>>>> the first page I try to print. After that, the printer stops printing >>>>> and in the printer icon at the status appear Error... >>>>> >>>>> Then I have to stop de printer spooler and then start it again... >>>>> >>>>> I've tried everything and I can't solve this... >>>>> >>>>> Is there anyone out there that can help me? >>>>> >>>>> Thank you >>>>> >>>> >>>> >>> >>>

>>
>>

>
>

10-25-2007

I have the same problem...it turns out that Windows Vista Home Basic does not
allow wireless printing...I confirmed this with Toshiba who made my laptop.

"Alan Morris [MSFT]" wrote:

Quote:

> How about disabling SNMP on the port configuration.
>
> Is there any HP monitoring software that may need network access to the
> device?
>
> --
> Alan Morris
> Windows Printing Team
> Search the Microsoft Knowledge Base here:
> http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto
>
> This posting is provided "AS IS" with no warranties, and confers no rights.
>
> "Pedro Sendas Pereira" <sendas@xxxxxx> wrote in message
> news:uYDDUnyFIHA.3376@xxxxxx

Quote:

> > That doesn't work either... :|
> >
> > I've been talking to HP but they don't seem to know what is happening...
> >
> > "Alan Morris [MSFT]" <alanmo@xxxxxx> wrote in message
> > news:%23gbSM2pFIHA.1316@xxxxxx

	Quote:
	> >> If bidirectional is enabled, try disabling.. > >> > >> > >> > >> -- > >> Alan Morris > >> Windows Printing Team > >> Search the Microsoft Knowledge Base here: > >> http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto > >> > >> This posting is provided "AS IS" with no warranties, and confers no > >> rights. > >> > >> "Pedro Sendas Pereira" <sendas@xxxxxx> wrote in message > >> news:O$sjYPnFIHA.4476@xxxxxx > >>>I see that there is a lot of people with networking printer problems in > >>>Vista... > >>> > >>> Can'y anyone help me please? > >>> > >>> Thanks > >>> > >>> "Pedro Sendas Pereira" <sendas@xxxxxx> wrote in message > >>> news:ev%23eznODIHA.4196@xxxxxx > >>>> No ideas? > >>>> > >>>> "Pedro Sendas Pereira" <sendas@xxxxxx> wrote in message > >>>> news:u6tJ5RpCIHA.3712@xxxxxx > >>>>> Hi > >>>>> > >>>>> I have a HP PSC-1315 printer connected to the router Asus WL-500GP. > >>>>> > >>>>> I've installed latest drivers from HP. > >>>>> > >>>>> The router IP is 192.168.1.1 > >>>>> > >>>>> In Windows XP it all went well (I was able to print with no problems, > >>>>> after creating a TCP/IP port) but in Vista I can only print half of > >>>>> the first page I try to print. After that, the printer stops printing > >>>>> and in the printer icon at the status appear Error... > >>>>> > >>>>> Then I have to stop de printer spooler and then start it again... > >>>>> > >>>>> I've tried everything and I can't solve this... > >>>>> > >>>>> Is there anyone out there that can help me? > >>>>> > >>>>> Thank you > >>>>> > >>>> > >>>> > >>> > >>> > >> > >>

> >
> >

>
>
>

10-26-2007

SNMP is enabled...

"Alan Morris [MSFT]" <alanmo@xxxxxx> wrote in message
news:elN7OF0FIHA.3716@xxxxxx

Quote:

> How about disabling SNMP on the port configuration.
>
> Is there any HP monitoring software that may need network access to the
> device?
>
> --
> Alan Morris
> Windows Printing Team
> Search the Microsoft Knowledge Base here:
> http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto
>
> This posting is provided "AS IS" with no warranties, and confers no
> rights.
>
> "Pedro Sendas Pereira" <sendas@xxxxxx> wrote in message
> news:uYDDUnyFIHA.3376@xxxxxx

Quote:

>> That doesn't work either... :|
>>
>> I've been talking to HP but they don't seem to know what is happening...
>>
>> "Alan Morris [MSFT]" <alanmo@xxxxxx> wrote in message
>> news:%23gbSM2pFIHA.1316@xxxxxx

	Quote:
	>>> If bidirectional is enabled, try disabling.. >>> >>> >>> >>> -- >>> Alan Morris >>> Windows Printing Team >>> Search the Microsoft Knowledge Base here: >>> http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto >>> >>> This posting is provided "AS IS" with no warranties, and confers no >>> rights. >>> >>> "Pedro Sendas Pereira" <sendas@xxxxxx> wrote in message >>> news:O$sjYPnFIHA.4476@xxxxxx >>>>I see that there is a lot of people with networking printer problems in >>>>Vista... >>>> >>>> Can'y anyone help me please? >>>> >>>> Thanks >>>> >>>> "Pedro Sendas Pereira" <sendas@xxxxxx> wrote in message >>>> news:ev%23eznODIHA.4196@xxxxxx >>>>> No ideas? >>>>> >>>>> "Pedro Sendas Pereira" <sendas@xxxxxx> wrote in message >>>>> news:u6tJ5RpCIHA.3712@xxxxxx >>>>>> Hi >>>>>> >>>>>> I have a HP PSC-1315 printer connected to the router Asus WL-500GP. >>>>>> >>>>>> I've installed latest drivers from HP. >>>>>> >>>>>> The router IP is 192.168.1.1 >>>>>> >>>>>> In Windows XP it all went well (I was able to print with no problems, >>>>>> after creating a TCP/IP port) but in Vista I can only print half of >>>>>> the first page I try to print. After that, the printer stops printing >>>>>> and in the printer icon at the status appear Error... >>>>>> >>>>>> Then I have to stop de printer spooler and then start it again... >>>>>> >>>>>> I've tried everything and I can't solve this... >>>>>> >>>>>> Is there anyone out there that can help me? >>>>>> >>>>>> Thank you >>>>>> >>>>> >>>>> >>>> >>>> >>> >>>

>>
>>

>
>

10-09-2007	#1 (permalink)
Pedro Sendas Pereira Guest	Problem printing in Wireless printer Hi I have a HP PSC-1315 printer connected to the router Asus WL-500GP. I've installed latest drivers from HP. The router IP is 192.168.1.1 In Windows XP it all went well (I was able to print with no problems, after creating a TCP/IP port) but in Vista I can only print half of the first page I try to print. After that, the printer stops printing and in the printer icon at the status appear Error... Then I have to stop de printer spooler and then start it again... I've tried everything and I can't solve this... Is there anyone out there that can help me? Thank you

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
printing to my XP PC's printer problem	fireman175	Vista networking & sharing	2	06-10-2008 08:19 PM
Printer problem printing from vista to XP	Jollyjoker538	Vista print fax & scan	13	02-27-2008 01:15 PM
Wireless Network Printing - Printer Communication Failure	YUKON_DENALI	Vista print fax & scan	6	08-11-2007 12:11 PM
Re: Trying to get printing to Wireless Printer Server working	dy.sector@yahoo.com	Vista General	6	03-10-2007 05:25 AM
Problem printing through a printer server	Andrea	Vista print fax & scan	4	01-25-2007 08:47 AM