Vista - Windows Defender will not start or run

01-16-2008

An interesting error occurred on my desktop with the Vista 64 bit during the
first part of December '07.

For the first time since Vista was loaded (about 1 October) I thought that I
would start Windows Defender and scan the computer. This would be the first
time in over two months. I got the following message:
-----------------------------------------
Windows Defender ---
Application failed to initialize: 0x800106ba. A problem caused this
program's service to stop. To start the service, restart your computer or
search Help and Support for how to start a service manually.
-----------------------------------------
So I rebooted. Got the same message. So I went to the various places on
the internet trying to find a solution to start Defender. None have worked
so far. There were a lot of threads on XP, but I only found one on Vista.

I even uninstalled MS Update <KB931099>, which was suppose to be a complete
new Win Defender install and then reinstalled it again (with a reboot in
between). No soap either with this change. Everything works OK on the
desktop so I have gave up to find a solution at that time.

I checked my laptop (Vista 32 bit) and defender works as it should. I could
always go back to the repair of Vista on the desktop and I might do that
sometime in the future. Any help or comments would be appreciated.

Thanks!

Bquinn

01-17-2008

are you running Microsoft OneCare?
If so, windows defender is turned off in One Care because One Care has its
one built in WD.
Some people had a problem after the last MS update.
I personally do not use OneCare because of all its problems.
robin
"Bquinn" <wquinn1@xxxxxx> wrote in message
news:u6fk0fLWIHA.5208@xxxxxx

Quote:

> An interesting error occurred on my desktop with the Vista 64 bit during
> the
> first part of December '07.
>
> For the first time since Vista was loaded (about 1 October) I thought that
> I
> would start Windows Defender and scan the computer. This would be the
> first
> time in over two months. I got the following message:
> -----------------------------------------
> Windows Defender ---
> Application failed to initialize: 0x800106ba. A problem caused this
> program's service to stop. To start the service, restart your computer or
> search Help and Support for how to start a service manually.
> -----------------------------------------
> So I rebooted. Got the same message. So I went to the various places on
> the internet trying to find a solution to start Defender. None have
> worked
> so far. There were a lot of threads on XP, but I only found one on Vista.
>
> I even uninstalled MS Update <KB931099>, which was suppose to be a
> complete
> new Win Defender install and then reinstalled it again (with a reboot in
> between). No soap either with this change. Everything works OK on the
> desktop so I have gave up to find a solution at that time.
>
> I checked my laptop (Vista 32 bit) and defender works as it should. I
> could
> always go back to the repair of Vista on the desktop and I might do that
> sometime in the future. Any help or comments would be appreciated.
>
> Thanks!
>
> Bquinn
>
>

01-17-2008

No Robin I am not running MS One Care.

Thanks for the information.

Bquinn

"Robinb" <robin@xxxxxx> wrote in message
news:%23qirVLTWIHA.2000@xxxxxx

Quote:

> are you running Microsoft OneCare?
> If so, windows defender is turned off in One Care because One Care has its
> one built in WD.
> Some people had a problem after the last MS update.
> I personally do not use OneCare because of all its problems.
> robin
> "Bquinn" <wquinn1@xxxxxx> wrote in message
> news:u6fk0fLWIHA.5208@xxxxxx

Quote:

>> An interesting error occurred on my desktop with the Vista 64 bit during
>> the
>> first part of December '07.
>>
>> For the first time since Vista was loaded (about 1 October) I thought
>> that I
>> would start Windows Defender and scan the computer. This would be the
>> first
>> time in over two months. I got the following message:
>> -----------------------------------------
>> Windows Defender ---
>> Application failed to initialize: 0x800106ba. A problem caused this
>> program's service to stop. To start the service, restart your computer
>> or
>> search Help and Support for how to start a service manually.
>> -----------------------------------------
>> So I rebooted. Got the same message. So I went to the various places on
>> the internet trying to find a solution to start Defender. None have
>> worked
>> so far. There were a lot of threads on XP, but I only found one on
>> Vista.
>>
>> I even uninstalled MS Update <KB931099>, which was suppose to be a
>> complete
>> new Win Defender install and then reinstalled it again (with a reboot in
>> between). No soap either with this change. Everything works OK on the
>> desktop so I have gave up to find a solution at that time.
>>
>> I checked my laptop (Vista 32 bit) and defender works as it should. I
>> could
>> always go back to the repair of Vista on the desktop and I might do that
>> sometime in the future. Any help or comments would be appreciated.
>>
>> Thanks!
>>
>> Bquinn
>>
>>

>
>

01-18-2008

try going to the WD newsgroup (I belong there too)
there are a great bunch of people who might be able to answer this better

you can do it via the web here

http://www.microsoft.com/athome/secu...s/default.mspx

To view these newsgroups with Outlook Express or another NNTP newsreader,
you might be required to log on using the following information:
.. Server: privatenews.microsoft.com
.. Account name: privatenews\spyware
.. Password: spyware (case-sensitive)

pick microsoft.private.security.spyware.general

robin
"Bquinn" <wquinn1@xxxxxx> wrote in message
news:uxrNByWWIHA.5980@xxxxxx

Quote:

> No Robin I am not running MS One Care.
>
> Thanks for the information.
>
> Bquinn
>
> "Robinb" <robin@xxxxxx> wrote in message
> news:%23qirVLTWIHA.2000@xxxxxx

Quote:

>> are you running Microsoft OneCare?
>> If so, windows defender is turned off in One Care because One Care has
>> its one built in WD.
>> Some people had a problem after the last MS update.
>> I personally do not use OneCare because of all its problems.
>> robin
>> "Bquinn" <wquinn1@xxxxxx> wrote in message
>> news:u6fk0fLWIHA.5208@xxxxxx

Quote:

>>> An interesting error occurred on my desktop with the Vista 64 bit during
>>> the
>>> first part of December '07.
>>>
>>> For the first time since Vista was loaded (about 1 October) I thought
>>> that I
>>> would start Windows Defender and scan the computer. This would be the
>>> first
>>> time in over two months. I got the following message:
>>> -----------------------------------------
>>> Windows Defender ---
>>> Application failed to initialize: 0x800106ba. A problem caused this
>>> program's service to stop. To start the service, restart your computer
>>> or
>>> search Help and Support for how to start a service manually.
>>> -----------------------------------------
>>> So I rebooted. Got the same message. So I went to the various places
>>> on
>>> the internet trying to find a solution to start Defender. None have
>>> worked
>>> so far. There were a lot of threads on XP, but I only found one on
>>> Vista.
>>>
>>> I even uninstalled MS Update <KB931099>, which was suppose to be a
>>> complete
>>> new Win Defender install and then reinstalled it again (with a reboot in
>>> between). No soap either with this change. Everything works OK on the
>>> desktop so I have gave up to find a solution at that time.
>>>
>>> I checked my laptop (Vista 32 bit) and defender works as it should. I
>>> could
>>> always go back to the repair of Vista on the desktop and I might do that
>>> sometime in the future. Any help or comments would be appreciated.
>>>
>>> Thanks!
>>>
>>> Bquinn
>>>
>>>

>>
>>

>

01-20-2008

I have the same issues with my system. Did you ever get an answer to the
error issue?

"Bquinn" wrote:

Quote:

> An interesting error occurred on my desktop with the Vista 64 bit during the
> first part of December '07.
>
> For the first time since Vista was loaded (about 1 October) I thought that I
> would start Windows Defender and scan the computer. This would be the first
> time in over two months. I got the following message:
> -----------------------------------------
> Windows Defender ---
> Application failed to initialize: 0x800106ba. A problem caused this
> program's service to stop. To start the service, restart your computer or
> search Help and Support for how to start a service manually.
> -----------------------------------------
> So I rebooted. Got the same message. So I went to the various places on
> the internet trying to find a solution to start Defender. None have worked
> so far. There were a lot of threads on XP, but I only found one on Vista.
>
> I even uninstalled MS Update <KB931099>, which was suppose to be a complete
> new Win Defender install and then reinstalled it again (with a reboot in
> between). No soap either with this change. Everything works OK on the
> desktop so I have gave up to find a solution at that time.
>
> I checked my laptop (Vista 32 bit) and defender works as it should. I could
> always go back to the repair of Vista on the desktop and I might do that
> sometime in the future. Any help or comments would be appreciated.
>
> Thanks!
>
> Bquinn
>
>
>

01-20-2008

No answers yet nor have I found a solution. I am not going to reinstall the
Vista since everything else works and works well.

Bquinn

"mhenry" <mhenry@xxxxxx> wrote in message
news:90784944-184F-4022-85B3-3E36137AD137@xxxxxx

Quote:

>I have the same issues with my system. Did you ever get an answer to the
> error issue?
>
> "Bquinn" wrote:
>

Quote:

>> An interesting error occurred on my desktop with the Vista 64 bit during
>> the
>> first part of December '07.
>>
>> For the first time since Vista was loaded (about 1 October) I thought
>> that I
>> would start Windows Defender and scan the computer. This would be the
>> first
>> time in over two months. I got the following message:
>> -----------------------------------------
>> Windows Defender ---
>> Application failed to initialize: 0x800106ba. A problem caused this
>> program's service to stop. To start the service, restart your computer
>> or
>> search Help and Support for how to start a service manually.
>> -----------------------------------------
>> So I rebooted. Got the same message. So I went to the various places on
>> the internet trying to find a solution to start Defender. None have
>> worked
>> so far. There were a lot of threads on XP, but I only found one on
>> Vista.
>>
>> I even uninstalled MS Update <KB931099>, which was suppose to be a
>> complete
>> new Win Defender install and then reinstalled it again (with a reboot in
>> between). No soap either with this change. Everything works OK on the
>> desktop so I have gave up to find a solution at that time.
>>
>> I checked my laptop (Vista 32 bit) and defender works as it should. I
>> could
>> always go back to the repair of Vista on the desktop and I might do that
>> sometime in the future. Any help or comments would be appreciated.
>>
>> Thanks!
>>
>> Bquinn
>>
>>
>>

03-25-2008

Don't know whether this will help you or not, but I have a post open on
similar lines see post "Win Defender non start?"

For some reason, don't ask me why, but my defender is now starting 8 times
out of 10 (I'm logging it) after I re-checked some of the option boxes, see
my post. On the non start occasions, I am manually starting with no issues. I
still don't understand why though the security centre is not giving warnings.
Be interested to know if this helps you though!
--
W4 me

"Bquinn" wrote:

Quote:

> No answers yet nor have I found a solution. I am not going to reinstall the
> Vista since everything else works and works well.
>
> Bquinn
>
> "mhenry" <mhenry@xxxxxx> wrote in message
> news:90784944-184F-4022-85B3-3E36137AD137@xxxxxx

Quote:

> >I have the same issues with my system. Did you ever get an answer to the
> > error issue?
> >
> > "Bquinn" wrote:
> >

Quote:

> >> An interesting error occurred on my desktop with the Vista 64 bit during
> >> the
> >> first part of December '07.
> >>
> >> For the first time since Vista was loaded (about 1 October) I thought
> >> that I
> >> would start Windows Defender and scan the computer. This would be the
> >> first
> >> time in over two months. I got the following message:
> >> -----------------------------------------
> >> Windows Defender ---
> >> Application failed to initialize: 0x800106ba. A problem caused this
> >> program's service to stop. To start the service, restart your computer
> >> or
> >> search Help and Support for how to start a service manually.
> >> -----------------------------------------
> >> So I rebooted. Got the same message. So I went to the various places on
> >> the internet trying to find a solution to start Defender. None have
> >> worked
> >> so far. There were a lot of threads on XP, but I only found one on
> >> Vista.
> >>
> >> I even uninstalled MS Update <KB931099>, which was suppose to be a
> >> complete
> >> new Win Defender install and then reinstalled it again (with a reboot in
> >> between). No soap either with this change. Everything works OK on the
> >> desktop so I have gave up to find a solution at that time.
> >>
> >> I checked my laptop (Vista 32 bit) and defender works as it should. I
> >> could
> >> always go back to the repair of Vista on the desktop and I might do that
> >> sometime in the future. Any help or comments would be appreciated.
> >>
> >> Thanks!
> >>
> >> Bquinn
> >>
> >>
> >>

>
>

03-25-2008

What have you done so far?

Did you set the WD service to "Automatic"?
Start>Programs>Administrative Tools>Services.
-------
*Report back, please*
[When responding to posts, please include the post(s) you are replying to so
that others may learn and benefit from the issue]

[How to ask a question]
http://support.microsoft.com/kb/555375

Quote:

> "Bquinn" wrote:
>

Quote:

>> No answers yet nor have I found a solution. I am not going to reinstall
>> the
>> Vista since everything else works and works well.
>>
>> Bquinn
>>
>> "mhenry" <mhenry@xxxxxx> wrote in message
>> news:90784944-184F-4022-85B3-3E36137AD137@xxxxxx

Quote:

>> >I have the same issues with my system. Did you ever get an answer to
>> >the
>> > error issue?
>> >
>> > "Bquinn" wrote:
>> >
>> >> An interesting error occurred on my desktop with the Vista 64 bit
>> >> during
>> >> the
>> >> first part of December '07.
>> >>
>> >> For the first time since Vista was loaded (about 1 October) I thought
>> >> that I
>> >> would start Windows Defender and scan the computer. This would be the
>> >> first
>> >> time in over two months. I got the following message:
>> >> -----------------------------------------
>> >> Windows Defender ---
>> >> Application failed to initialize: 0x800106ba. A problem caused this
>> >> program's service to stop. To start the service, restart your
>> >> computer
>> >> or
>> >> search Help and Support for how to start a service manually.
>> >> -----------------------------------------
>> >> So I rebooted. Got the same message. So I went to the various places
>> >> on
>> >> the internet trying to find a solution to start Defender. None have
>> >> worked
>> >> so far. There were a lot of threads on XP, but I only found one on
>> >> Vista.
>> >>
>> >> I even uninstalled MS Update <KB931099>, which was suppose to be a
>> >> complete
>> >> new Win Defender install and then reinstalled it again (with a reboot
>> >> in
>> >> between). No soap either with this change. Everything works OK on
>> >> the
>> >> desktop so I have gave up to find a solution at that time.
>> >>
>> >> I checked my laptop (Vista 32 bit) and defender works as it should. I
>> >> could
>> >> always go back to the repair of Vista on the desktop and I might do
>> >> that
>> >> sometime in the future. Any help or comments would be appreciated.
>> >>
>> >> Thanks!
>> >>
>> >> Bquinn
>> >>
>> >>
>> >>

>>
>>

**Brink** · 03-26-2008

Quote: Originally Posted by What4

Don't know whether this will help you or not, but I have a post open on
similar lines see post "Win Defender non start?"

For some reason, don't ask me why, but my defender is now starting 8 times
out of 10 (I'm logging it) after I re-checked some of the option boxes, see
my post. On the non start occasions, I am manually starting with no issues. I
still don't understand why though the security centre is not giving warnings.
Be interested to know if this helps you though!
--
W4 me

"Bquinn" wrote:

Quote:

> No answers yet nor have I found a solution. I am not going to reinstall the
> Vista since everything else works and works well.
>
> Bquinn
>
> "mhenry" <mhenry@xxxxxx> wrote in message
> news:90784944-184F-4022-85B3-3E36137AD137@xxxxxx
>
>

Hi W4 me,

This may be able to help you.

Unable to enable Windows Defender application in Windows Vista

Shawn

05-12-2008

"Bquinn" wrote:

Quote:

> An interesting error occurred on my desktop with the Vista 64 bit during the
> first part of December '07.
>
> For the first time since Vista was loaded (about 1 October) I thought that I
> would start Windows Defender and scan the computer. This would be the first
> time in over two months. I got the following message:
> -----------------------------------------
> Windows Defender ---
> Application failed to initialize: 0x800106ba. A problem caused this
> program's service to stop. To start the service, restart your computer or
> search Help and Support for how to start a service manually.
> -----------------------------------------
> So I rebooted. Got the same message. So I went to the various places on
> the internet trying to find a solution to start Defender. None have worked
> so far. There were a lot of threads on XP, but I only found one on Vista.
>
> I even uninstalled MS Update <KB931099>, which was suppose to be a complete
> new Win Defender install and then reinstalled it again (with a reboot in
> between). No soap either with this change. Everything works OK on the
> desktop so I have gave up to find a solution at that time.
>
> I checked my laptop (Vista 32 bit) and defender works as it should. I could
> always go back to the repair of Vista on the desktop and I might do that
> sometime in the future. Any help or comments would be appreciated.
>
> Thanks!
>
> Bquinn
>
>
>

01-16-2008	#1 (permalink)
Bquinn n/a posts	Windows Defender will not start or run An interesting error occurred on my desktop with the Vista 64 bit during the first part of December '07. For the first time since Vista was loaded (about 1 October) I thought that I would start Windows Defender and scan the computer. This would be the first time in over two months. I got the following message: ----------------------------------------- Windows Defender --- Application failed to initialize: 0x800106ba. A problem caused this program's service to stop. To start the service, restart your computer or search Help and Support for how to start a service manually. ----------------------------------------- So I rebooted. Got the same message. So I went to the various places on the internet trying to find a solution to start Defender. None have worked so far. There were a lot of threads on XP, but I only found one on Vista. I even uninstalled MS Update <KB931099>, which was suppose to be a complete new Win Defender install and then reinstalled it again (with a reboot in between). No soap either with this change. Everything works OK on the desktop so I have gave up to find a solution at that time. I checked my laptop (Vista 32 bit) and defender works as it should. I could always go back to the repair of Vista on the desktop and I might do that sometime in the future. Any help or comments would be appreciated. Thanks! Bquinn
My System Specs

01-17-2008	#2 (permalink)
Robinb n/a posts	Re: Windows Defender will not start or run are you running Microsoft OneCare? If so, windows defender is turned off in One Care because One Care has its one built in WD. Some people had a problem after the last MS update. I personally do not use OneCare because of all its problems. robin "Bquinn" <wquinn1@xxxxxx> wrote in message news:u6fk0fLWIHA.5208@xxxxxx Quote: > An interesting error occurred on my desktop with the Vista 64 bit during > the > first part of December '07. > > For the first time since Vista was loaded (about 1 October) I thought that > I > would start Windows Defender and scan the computer. This would be the > first > time in over two months. I got the following message: > ----------------------------------------- > Windows Defender --- > Application failed to initialize: 0x800106ba. A problem caused this > program's service to stop. To start the service, restart your computer or > search Help and Support for how to start a service manually. > ----------------------------------------- > So I rebooted. Got the same message. So I went to the various places on > the internet trying to find a solution to start Defender. None have > worked > so far. There were a lot of threads on XP, but I only found one on Vista. > > I even uninstalled MS Update <KB931099>, which was suppose to be a > complete > new Win Defender install and then reinstalled it again (with a reboot in > between). No soap either with this change. Everything works OK on the > desktop so I have gave up to find a solution at that time. > > I checked my laptop (Vista 32 bit) and defender works as it should. I > could > always go back to the repair of Vista on the desktop and I might do that > sometime in the future. Any help or comments would be appreciated. > > Thanks! > > Bquinn > >
My System Specs

01-17-2008	#3 (permalink)
Bquinn n/a posts	Re: Windows Defender will not start or run No Robin I am not running MS One Care. Thanks for the information. Bquinn "Robinb" <robin@xxxxxx> wrote in message news:%23qirVLTWIHA.2000@xxxxxx Quote: > are you running Microsoft OneCare? > If so, windows defender is turned off in One Care because One Care has its > one built in WD. > Some people had a problem after the last MS update. > I personally do not use OneCare because of all its problems. > robin > "Bquinn" <wquinn1@xxxxxx> wrote in message > news:u6fk0fLWIHA.5208@xxxxxx Quote: >> An interesting error occurred on my desktop with the Vista 64 bit during >> the >> first part of December '07. >> >> For the first time since Vista was loaded (about 1 October) I thought >> that I >> would start Windows Defender and scan the computer. This would be the >> first >> time in over two months. I got the following message: >> ----------------------------------------- >> Windows Defender --- >> Application failed to initialize: 0x800106ba. A problem caused this >> program's service to stop. To start the service, restart your computer >> or >> search Help and Support for how to start a service manually. >> ----------------------------------------- >> So I rebooted. Got the same message. So I went to the various places on >> the internet trying to find a solution to start Defender. None have >> worked >> so far. There were a lot of threads on XP, but I only found one on >> Vista. >> >> I even uninstalled MS Update <KB931099>, which was suppose to be a >> complete >> new Win Defender install and then reinstalled it again (with a reboot in >> between). No soap either with this change. Everything works OK on the >> desktop so I have gave up to find a solution at that time. >> >> I checked my laptop (Vista 32 bit) and defender works as it should. I >> could >> always go back to the repair of Vista on the desktop and I might do that >> sometime in the future. Any help or comments would be appreciated. >> >> Thanks! >> >> Bquinn >> >> > >
My System Specs

01-18-2008	#4 (permalink)
Robinb n/a posts	Re: Windows Defender will not start or run try going to the WD newsgroup (I belong there too) there are a great bunch of people who might be able to answer this better you can do it via the web here http://www.microsoft.com/athome/secu...s/default.mspx To view these newsgroups with Outlook Express or another NNTP newsreader, you might be required to log on using the following information: .. Server: privatenews.microsoft.com .. Account name: privatenews\spyware .. Password: spyware (case-sensitive) pick microsoft.private.security.spyware.general robin "Bquinn" <wquinn1@xxxxxx> wrote in message news:uxrNByWWIHA.5980@xxxxxx Quote: > No Robin I am not running MS One Care. > > Thanks for the information. > > Bquinn > > "Robinb" <robin@xxxxxx> wrote in message > news:%23qirVLTWIHA.2000@xxxxxx Quote: >> are you running Microsoft OneCare? >> If so, windows defender is turned off in One Care because One Care has >> its one built in WD. >> Some people had a problem after the last MS update. >> I personally do not use OneCare because of all its problems. >> robin >> "Bquinn" <wquinn1@xxxxxx> wrote in message >> news:u6fk0fLWIHA.5208@xxxxxx Quote: >>> An interesting error occurred on my desktop with the Vista 64 bit during >>> the >>> first part of December '07. >>> >>> For the first time since Vista was loaded (about 1 October) I thought >>> that I >>> would start Windows Defender and scan the computer. This would be the >>> first >>> time in over two months. I got the following message: >>> ----------------------------------------- >>> Windows Defender --- >>> Application failed to initialize: 0x800106ba. A problem caused this >>> program's service to stop. To start the service, restart your computer >>> or >>> search Help and Support for how to start a service manually. >>> ----------------------------------------- >>> So I rebooted. Got the same message. So I went to the various places >>> on >>> the internet trying to find a solution to start Defender. None have >>> worked >>> so far. There were a lot of threads on XP, but I only found one on >>> Vista. >>> >>> I even uninstalled MS Update <KB931099>, which was suppose to be a >>> complete >>> new Win Defender install and then reinstalled it again (with a reboot in >>> between). No soap either with this change. Everything works OK on the >>> desktop so I have gave up to find a solution at that time. >>> >>> I checked my laptop (Vista 32 bit) and defender works as it should. I >>> could >>> always go back to the repair of Vista on the desktop and I might do that >>> sometime in the future. Any help or comments would be appreciated. >>> >>> Thanks! >>> >>> Bquinn >>> >>> >> >> >
My System Specs

01-20-2008	#5 (permalink)
mhenry n/a posts	RE: Windows Defender will not start or run I have the same issues with my system. Did you ever get an answer to the error issue? "Bquinn" wrote: Quote: > An interesting error occurred on my desktop with the Vista 64 bit during the > first part of December '07. > > For the first time since Vista was loaded (about 1 October) I thought that I > would start Windows Defender and scan the computer. This would be the first > time in over two months. I got the following message: > ----------------------------------------- > Windows Defender --- > Application failed to initialize: 0x800106ba. A problem caused this > program's service to stop. To start the service, restart your computer or > search Help and Support for how to start a service manually. > ----------------------------------------- > So I rebooted. Got the same message. So I went to the various places on > the internet trying to find a solution to start Defender. None have worked > so far. There were a lot of threads on XP, but I only found one on Vista. > > I even uninstalled MS Update <KB931099>, which was suppose to be a complete > new Win Defender install and then reinstalled it again (with a reboot in > between). No soap either with this change. Everything works OK on the > desktop so I have gave up to find a solution at that time. > > I checked my laptop (Vista 32 bit) and defender works as it should. I could > always go back to the repair of Vista on the desktop and I might do that > sometime in the future. Any help or comments would be appreciated. > > Thanks! > > Bquinn > > >
My System Specs

01-20-2008	#6 (permalink)
Bquinn n/a posts	Re: Windows Defender will not start or run No answers yet nor have I found a solution. I am not going to reinstall the Vista since everything else works and works well. Bquinn "mhenry" <mhenry@xxxxxx> wrote in message news:90784944-184F-4022-85B3-3E36137AD137@xxxxxx Quote: >I have the same issues with my system. Did you ever get an answer to the > error issue? > > "Bquinn" wrote: > Quote: >> An interesting error occurred on my desktop with the Vista 64 bit during >> the >> first part of December '07. >> >> For the first time since Vista was loaded (about 1 October) I thought >> that I >> would start Windows Defender and scan the computer. This would be the >> first >> time in over two months. I got the following message: >> ----------------------------------------- >> Windows Defender --- >> Application failed to initialize: 0x800106ba. A problem caused this >> program's service to stop. To start the service, restart your computer >> or >> search Help and Support for how to start a service manually. >> ----------------------------------------- >> So I rebooted. Got the same message. So I went to the various places on >> the internet trying to find a solution to start Defender. None have >> worked >> so far. There were a lot of threads on XP, but I only found one on >> Vista. >> >> I even uninstalled MS Update <KB931099>, which was suppose to be a >> complete >> new Win Defender install and then reinstalled it again (with a reboot in >> between). No soap either with this change. Everything works OK on the >> desktop so I have gave up to find a solution at that time. >> >> I checked my laptop (Vista 32 bit) and defender works as it should. I >> could >> always go back to the repair of Vista on the desktop and I might do that >> sometime in the future. Any help or comments would be appreciated. >> >> Thanks! >> >> Bquinn >> >> >>
My System Specs

03-25-2008	#7 (permalink)
What4 n/a posts	Re: Windows Defender will not start or run Don't know whether this will help you or not, but I have a post open on similar lines see post "Win Defender non start?" For some reason, don't ask me why, but my defender is now starting 8 times out of 10 (I'm logging it) after I re-checked some of the option boxes, see my post. On the non start occasions, I am manually starting with no issues. I still don't understand why though the security centre is not giving warnings. Be interested to know if this helps you though! -- W4 me "Bquinn" wrote: Quote: > No answers yet nor have I found a solution. I am not going to reinstall the > Vista since everything else works and works well. > > Bquinn > > "mhenry" <mhenry@xxxxxx> wrote in message > news:90784944-184F-4022-85B3-3E36137AD137@xxxxxx Quote: > >I have the same issues with my system. Did you ever get an answer to the > > error issue? > > > > "Bquinn" wrote: > > Quote: > >> An interesting error occurred on my desktop with the Vista 64 bit during > >> the > >> first part of December '07. > >> > >> For the first time since Vista was loaded (about 1 October) I thought > >> that I > >> would start Windows Defender and scan the computer. This would be the > >> first > >> time in over two months. I got the following message: > >> ----------------------------------------- > >> Windows Defender --- > >> Application failed to initialize: 0x800106ba. A problem caused this > >> program's service to stop. To start the service, restart your computer > >> or > >> search Help and Support for how to start a service manually. > >> ----------------------------------------- > >> So I rebooted. Got the same message. So I went to the various places on > >> the internet trying to find a solution to start Defender. None have > >> worked > >> so far. There were a lot of threads on XP, but I only found one on > >> Vista. > >> > >> I even uninstalled MS Update <KB931099>, which was suppose to be a > >> complete > >> new Win Defender install and then reinstalled it again (with a reboot in > >> between). No soap either with this change. Everything works OK on the > >> desktop so I have gave up to find a solution at that time. > >> > >> I checked my laptop (Vista 32 bit) and defender works as it should. I > >> could > >> always go back to the repair of Vista on the desktop and I might do that > >> sometime in the future. Any help or comments would be appreciated. > >> > >> Thanks! > >> > >> Bquinn > >> > >> > >> > >
My System Specs

03-25-2008	#8 (permalink)
Bob n/a posts	Re: Windows Defender will not start or run What have you done so far? Did you set the WD service to "Automatic"? Start>Programs>Administrative Tools>Services. ------- Report back, please [When responding to posts, please include the post(s) you are replying to so that others may learn and benefit from the issue] [How to ask a question] http://support.microsoft.com/kb/555375 Quote: > "Bquinn" wrote: > Quote: >> No answers yet nor have I found a solution. I am not going to reinstall >> the >> Vista since everything else works and works well. >> >> Bquinn >> >> "mhenry" <mhenry@xxxxxx> wrote in message >> news:90784944-184F-4022-85B3-3E36137AD137@xxxxxx Quote: >> >I have the same issues with my system. Did you ever get an answer to >> >the >> > error issue? >> > >> > "Bquinn" wrote: >> > >> >> An interesting error occurred on my desktop with the Vista 64 bit >> >> during >> >> the >> >> first part of December '07. >> >> >> >> For the first time since Vista was loaded (about 1 October) I thought >> >> that I >> >> would start Windows Defender and scan the computer. This would be the >> >> first >> >> time in over two months. I got the following message: >> >> ----------------------------------------- >> >> Windows Defender --- >> >> Application failed to initialize: 0x800106ba. A problem caused this >> >> program's service to stop. To start the service, restart your >> >> computer >> >> or >> >> search Help and Support for how to start a service manually. >> >> ----------------------------------------- >> >> So I rebooted. Got the same message. So I went to the various places >> >> on >> >> the internet trying to find a solution to start Defender. None have >> >> worked >> >> so far. There were a lot of threads on XP, but I only found one on >> >> Vista. >> >> >> >> I even uninstalled MS Update <KB931099>, which was suppose to be a >> >> complete >> >> new Win Defender install and then reinstalled it again (with a reboot >> >> in >> >> between). No soap either with this change. Everything works OK on >> >> the >> >> desktop so I have gave up to find a solution at that time. >> >> >> >> I checked my laptop (Vista 32 bit) and defender works as it should. I >> >> could >> >> always go back to the repair of Vista on the desktop and I might do >> >> that >> >> sometime in the future. Any help or comments would be appreciated. >> >> >> >> Thanks! >> >> >> >> Bquinn >> >> >> >> >> >> >> >>
My System Specs

03-26-2008	#9 (permalink)
Brink Vista x64 Ultimate SP2, Windows 7 Ultimate x64 26,044 posts	Re: Windows Defender will not start or run Quote: Originally Posted by What4 Don't know whether this will help you or not, but I have a post open on similar lines see post "Win Defender non start?" For some reason, don't ask me why, but my defender is now starting 8 times out of 10 (I'm logging it) after I re-checked some of the option boxes, see my post. On the non start occasions, I am manually starting with no issues. I still don't understand why though the security centre is not giving warnings. Be interested to know if this helps you though! -- W4 me "Bquinn" wrote: Quote: > No answers yet nor have I found a solution. I am not going to reinstall the > Vista since everything else works and works well. > > Bquinn > > "mhenry" <mhenry@xxxxxx> wrote in message > news:90784944-184F-4022-85B3-3E36137AD137@xxxxxx > > Hi W4 me, This may be able to help you. Unable to enable Windows Defender application in Windows Vista Shawn
My System Specs

05-12-2008	#10 (permalink)
Tom McC n/a posts	RE: Windows Defender will not start or run "Bquinn" wrote: Quote: > An interesting error occurred on my desktop with the Vista 64 bit during the > first part of December '07. > > For the first time since Vista was loaded (about 1 October) I thought that I > would start Windows Defender and scan the computer. This would be the first > time in over two months. I got the following message: > ----------------------------------------- > Windows Defender --- > Application failed to initialize: 0x800106ba. A problem caused this > program's service to stop. To start the service, restart your computer or > search Help and Support for how to start a service manually. > ----------------------------------------- > So I rebooted. Got the same message. So I went to the various places on > the internet trying to find a solution to start Defender. None have worked > so far. There were a lot of threads on XP, but I only found one on Vista. > > I even uninstalled MS Update <KB931099>, which was suppose to be a complete > new Win Defender install and then reinstalled it again (with a reboot in > between). No soap either with this change. Everything works OK on the > desktop so I have gave up to find a solution at that time. > > I checked my laptop (Vista 32 bit) and defender works as it should. I could > always go back to the repair of Vista on the desktop and I might do that > sometime in the future. Any help or comments would be appreciated. > > Thanks! > > Bquinn > > >
My System Specs

Similar Threads
Thread	Forum
Windows Defender won't start automatically	Vista security
windows defender doesn't start	Vista General
How do I start Windows Defender ?	System Security
Windows Defender will not auto start	Vista security
Windows Defender doesn't start at startup	Vista security