Security centre can't turn on windows firewall??

The message is "Security centre can't turn on windows firewall.<A
HREF="ErrorActionWindowsFirewallCo...
on windows firewall manually</A>

Any ideas?????

Try a repair installation of Vista

regards
Robert
"granabulaxx" <granabulaxx@discussions.microsoft.com> wrote in message
news:F31BE1CC-45D9-45E9-BCEF-AF0743FD8301@microsoft.com...
> The message is "Security centre can't turn on windows firewall.<A
> HREF="ErrorActionWindowsFirewallCo...
> on windows firewall manually</A>
>
> Any ideas?????

Nope....upgraded to 5744 and it has added two different screens but still at
the end tries to start the service but fails...

"Robert R. Johnson Jr" wrote:

> Try a repair installation of Vista
>
> regards
> Robert
> "granabulaxx" <granabulaxx@discussions.microsoft.com> wrote in message
> news:F31BE1CC-45D9-45E9-BCEF-AF0743FD8301@microsoft.com...
> > The message is "Security centre can't turn on windows firewall.<A
> > HREF="ErrorActionWindowsFirewallCo...
> > on windows firewall manually</A>
> >
> > Any ideas?????
>
>

Try bypassing the security center by going to control panel: System and
Maintenance: Administrative Tools: Services:

verify the following services are running (If not start in this order):
(All of these should be set to automatic startup)

RPC
DCOM Service Process Launcher
Windows Firewall

"granabulaxx" wrote:

> Nope....upgraded to 5744 and it has added two different screens but still at
> the end tries to start the service but fails...
>
> "Robert R. Johnson Jr" wrote:
>
> > Try a repair installation of Vista
> >
> > regards
> > Robert
> > "granabulaxx" <granabulaxx@discussions.microsoft.com> wrote in message
> > news:F31BE1CC-45D9-45E9-BCEF-AF0743FD8301@microsoft.com...
> > > The message is "Security centre can't turn on windows firewall.<A
> > > HREF="ErrorActionWindowsFirewallCo...
> > > on windows firewall manually</A>
> > >
> > > Any ideas?????
> >
> >

Ok, so turning them on in order after trying to turn on windows firewall
service now gives me error code 13???

"Tim Starid" wrote:

> Try bypassing the security center by going to control panel: System and
> Maintenance: Administrative Tools: Services:
>
> verify the following services are running (If not start in this order):
> (All of these should be set to automatic startup)
>
> RPC
> DCOM Service Process Launcher
> Windows Firewall
>
> "granabulaxx" wrote:
>
> > Nope....upgraded to 5744 and it has added two different screens but still at
> > the end tries to start the service but fails...
> >
> > "Robert R. Johnson Jr" wrote:
> >
> > > Try a repair installation of Vista
> > >
> > > regards
> > > Robert
> > > "granabulaxx" <granabulaxx@discussions.microsoft.com> wrote in message
> > > news:F31BE1CC-45D9-45E9-BCEF-AF0743FD8301@microsoft.com...
> > > > The message is "Security centre can't turn on windows firewall.<A
> > > > HREF="ErrorActionWindowsFirewallCo...
> > > > on windows firewall manually</A>
> > > >
> > > > Any ideas?????
> > >
> > >

I'm having the same problem here (security center can't start the
firewall, trying to start from the services control panel gets error
#13). Looking at the event viewer, I see:

The Windows Firewall Service was unable to retrieve the security policy
from the local storage. The service will continue enforcing the current
policy. Error Code: 2147942413

And:

The Windows Firewall Service was unable to parse the new security
policy. The service will continue with currently enforced policy.
Error Code: 2147942413

I've gone into the group policy object editor and fiddled with the
firewall policy settings, but to no avail -- I just can't get the
firewall to start. Suggestions?


--
onerats
------------------------------------------------------------------------
onerats's Profile: http://forums.techarena.in/member.php?userid=18240
View this thread: http://forums.techarena.in/showthread.php?t=602690

http://www.techarena.in

Running RTM build. I had RC1 previously and firewall was on. After upgrading
to RTM firewall is off and can't be turned on, citing Group Policy.

I followed the advice below re: the Services Control Panel, the other two
are started, but Firewall isn't even listed on either tab.

Someone asked me is OneCare installed. No. I had it under XP but had to
uninstall it with Vista beta 2.

Why has Windows turned off my firewall and why can't I turn it back on?

"onerats" wrote:

>
> I'm having the same problem here (security center can't start the
> firewall, trying to start from the services control panel gets error
> #13). Looking at the event viewer, I see:
>
> The Windows Firewall Service was unable to retrieve the security policy
> from the local storage. The service will continue enforcing the current
> policy. Error Code: 2147942413
>
> And:
>
> The Windows Firewall Service was unable to parse the new security
> policy. The service will continue with currently enforced policy.
> Error Code: 2147942413
>
> I've gone into the group policy object editor and fiddled with the
> firewall policy settings, but to no avail -- I just can't get the
> firewall to start. Suggestions?
>
>
> --
> onerats
> ------------------------------------------------------------------------
> onerats's Profile: http://forums.techarena.in/member.php?userid=18240
> View this thread: http://forums.techarena.in/showthread.php?t=602690
>
> http://www.techarena.in
>
>

Followup in case this helps anybody. First of all Windows Firewall was
present in services after all (under W) and showed as already started, but I
kept getting the security warning it was not on. It turned out that I had to
use the Windows Firewall with Advanced Security in MMC to turn on the
firewall. Running Ultimate, build 6000. Worked like a charm after that but
still cannot use Firewall control panel to control it, must use the advanced
MMC version with "Group Policy," nuts cuz I'm not on a domain. Thanks a lot.

Theano

"Theano" wrote:

> Running RTM build. I had RC1 previously and firewall was on. After upgrading
> to RTM firewall is off and can't be turned on, citing Group Policy.
>
> I followed the advice below re: the Services Control Panel, the other two
> are started, but Firewall isn't even listed on either tab.
>
> Someone asked me is OneCare installed. No. I had it under XP but had to
> uninstall it with Vista beta 2.
>
> Why has Windows turned off my firewall and why can't I turn it back on?
>
> "onerats" wrote:
>
> >
> > I'm having the same problem here (security center can't start the
> > firewall, trying to start from the services control panel gets error
> > #13). Looking at the event viewer, I see:
> >
> > The Windows Firewall Service was unable to retrieve the security policy
> > from the local storage. The service will continue enforcing the current
> > policy. Error Code: 2147942413
> >
> > And:
> >
> > The Windows Firewall Service was unable to parse the new security
> > policy. The service will continue with currently enforced policy.
> > Error Code: 2147942413
> >
> > I've gone into the group policy object editor and fiddled with the
> > firewall policy settings, but to no avail -- I just can't get the
> > firewall to start. Suggestions?
> >
> >
> > --
> > onerats
> > ------------------------------------------------------------------------
> > onerats's Profile: http://forums.techarena.in/member.php?userid=18240
> > View this thread: http://forums.techarena.in/showthread.php?t=602690
> >
> > http://www.techarena.in
> >
> >

I am on a domain and I am geting this error, anybody find any workaround?

"Theano" wrote:

> Followup in case this helps anybody. First of all Windows Firewall was
> present in services after all (under W) and showed as already started, but I
> kept getting the security warning it was not on. It turned out that I had to
> use the Windows Firewall with Advanced Security in MMC to turn on the
> firewall. Running Ultimate, build 6000. Worked like a charm after that but
> still cannot use Firewall control panel to control it, must use the advanced
> MMC version with "Group Policy," nuts cuz I'm not on a domain. Thanks a lot.
>
> Theano
>
> "Theano" wrote:
>
> > Running RTM build. I had RC1 previously and firewall was on. After upgrading
> > to RTM firewall is off and can't be turned on, citing Group Policy.
> >
> > I followed the advice below re: the Services Control Panel, the other two
> > are started, but Firewall isn't even listed on either tab.
> >
> > Someone asked me is OneCare installed. No. I had it under XP but had to
> > uninstall it with Vista beta 2.
> >
> > Why has Windows turned off my firewall and why can't I turn it back on?
> >
> > "onerats" wrote:
> >
> > >
> > > I'm having the same problem here (security center can't start the
> > > firewall, trying to start from the services control panel gets error
> > > #13). Looking at the event viewer, I see:
> > >
> > > The Windows Firewall Service was unable to retrieve the security policy
> > > from the local storage. The service will continue enforcing the current
> > > policy. Error Code: 2147942413
> > >
> > > And:
> > >
> > > The Windows Firewall Service was unable to parse the new security
> > > policy. The service will continue with currently enforced policy.
> > > Error Code: 2147942413
> > >
> > > I've gone into the group policy object editor and fiddled with the
> > > firewall policy settings, but to no avail -- I just can't get the
> > > firewall to start. Suggestions?
> > >
> > >
> > > --
> > > onerats
> > > ------------------------------------------------------------------------
> > > onerats's Profile: http://forums.techarena.in/member.php?userid=18240
> > > View this thread: http://forums.techarena.in/showthread.php?t=602690
> > >
> > > http://www.techarena.in
> > >
> > >

Events viewer states:

- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Service Control Manager"
Guid="{555908D1-A6D7-4695-8E1E-26931D2012F4}" EventSourceName="Service
Control Manager" />
<EventID Qualifiers="49152">7024</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2006-11-23T14:47:28.000Z" />
<EventRecordID>17995</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>System</Channel>
<Computer>Peter-PC</Computer>
<Security />
</System>
- <EventData>
<Data Name="param1">Windows Firewall</Data>
<Data Name="param2">13 (0xD)</Data>
</EventData>
</Event>

HELP!

"T. Ashley" wrote:

> I am on a domain and I am geting this error, anybody find any workaround?
>
> "Theano" wrote:
>
> > Followup in case this helps anybody. First of all Windows Firewall was
> > present in services after all (under W) and showed as already started, but I
> > kept getting the security warning it was not on. It turned out that I had to
> > use the Windows Firewall with Advanced Security in MMC to turn on the
> > firewall. Running Ultimate, build 6000. Worked like a charm after that but
> > still cannot use Firewall control panel to control it, must use the advanced
> > MMC version with "Group Policy," nuts cuz I'm not on a domain. Thanks a lot.
> >
> > Theano
> >
> > "Theano" wrote:
> >
> > > Running RTM build. I had RC1 previously and firewall was on. After upgrading
> > > to RTM firewall is off and can't be turned on, citing Group Policy.
> > >
> > > I followed the advice below re: the Services Control Panel, the other two
> > > are started, but Firewall isn't even listed on either tab.
> > >
> > > Someone asked me is OneCare installed. No. I had it under XP but had to
> > > uninstall it with Vista beta 2.
> > >
> > > Why has Windows turned off my firewall and why can't I turn it back on?
> > >
> > > "onerats" wrote:
> > >
> > > >
> > > > I'm having the same problem here (security center can't start the
> > > > firewall, trying to start from the services control panel gets error
> > > > #13). Looking at the event viewer, I see:
> > > >
> > > > The Windows Firewall Service was unable to retrieve the security policy
> > > > from the local storage. The service will continue enforcing the current
> > > > policy. Error Code: 2147942413
> > > >
> > > > And:
> > > >
> > > > The Windows Firewall Service was unable to parse the new security
> > > > policy. The service will continue with currently enforced policy.
> > > > Error Code: 2147942413
> > > >
> > > > I've gone into the group policy object editor and fiddled with the
> > > > firewall policy settings, but to no avail -- I just can't get the
> > > > firewall to start. Suggestions?
> > > >
> > > >
> > > > --
> > > > onerats
> > > > ------------------------------------------------------------------------
> > > > onerats's Profile: http://forums.techarena.in/member.php?userid=18240
> > > > View this thread: http://forums.techarena.in/showthread.php?t=602690
> > > >
> > > > http://www.techarena.in
> > > >
> > > >