What does a UAC admin prompt with no accounts listed mean?

I've been stuck on this issue all weekend, have calls into MS tech support,
etc, because basically I'm locked out of any admin tasks. The problem I'm
having is that the UAC prompt that says I need to enter an admin password to
continue doesn't actually list any accounts. This happened after I reverted
my regular account from admin to standard (there still is a built-in
Administrator account listed in Computer Management).
So as a result, I can't do any administrator activities (like turning off
UAC or reinstalling the OS)...and because Vista disables my MS (Natural
4000) keyboard during startup, I cannot enter Safe Mode, either.

So I've given up trying to find a way around UAC. Now I'm focusing on
getting an admin account to show up the UAC list. Anyone know how to do
this? It does look like the Administrator account is disabled, but why would
Vista allow this to lock out admins, since it wouldn't allow the last admin
account to be deleted, but that's what's effectively happened.


BTW: I've also tried to write a .Net client to impersonate the
administrator, but when it's worked, it still lists my user as being the
non-admin, even though it won't show an error.

Keith

You need to get into Safe Mode, which should allow you to use the built-in
admin account, since it is the only admin
account on the system. Get a standard keyboard, if you don't have one handy,
buy a cheap one. You can get them for well under ten dollars. Plug it into
the PS port and try to get into safe mode.

Once you are in there, create a password for the built-in admin account. I
would also create another admin account with a password to be used in case
you need it.
--

Ronnie Vernon
Microsoft MVP
Windows Shell/User


"Keith Patrick" <richard_keith_patrick@nospam.hotmail.com> wrote in message
news:O0FcCU8bHHA.3616@TK2MSFTNGP05.phx.gbl...
> I've been stuck on this issue all weekend, have calls into MS tech
> support, etc, because basically I'm locked out of any admin tasks. The
> problem I'm having is that the UAC prompt that says I need to enter an
> admin password to continue doesn't actually list any accounts. This
> happened after I reverted my regular account from admin to standard (there
> still is a built-in Administrator account listed in Computer Management).
> So as a result, I can't do any administrator activities (like turning off
> UAC or reinstalling the OS)...and because Vista disables my MS (Natural
> 4000) keyboard during startup, I cannot enter Safe Mode, either.
>
> So I've given up trying to find a way around UAC. Now I'm focusing on
> getting an admin account to show up the UAC list. Anyone know how to do
> this? It does look like the Administrator account is disabled, but why
> would Vista allow this to lock out admins, since it wouldn't allow the
> last admin account to be deleted, but that's what's effectively happened.
>
>
> BTW: I've also tried to write a .Net client to impersonate the
> administrator, but when it's worked, it still lists my user as being the
> non-admin, even though it won't show an error.

After talking with several people at Microsoft tech support, it means that I
removed my non-built-in admin via the MMC, which, unlike the User Account
applet, does not stop you if there are no other active, non-hidden admins.
Tech support said that it *should* see this and fall back to some admin
account, but I've got a Media Center Extender account (my 360 requested that
it be created, and for some reason, it needs to be an administrator) which
is not available to the Welcome screen but UAC doesn't check for the hidden
aspect; only the disabled aspect.

What they're telling me that so far the only answer is to perform a system
restore, but since I didnt' reboot after this change for 2 weeks, I would
lose a substantial amount of work.

So this begs the question: when is MS ever going to update the MMC snap-in?
If they could do it and have it pushed out on Windows Update in the next few
hours, that'd be sweeeeellllllllllll.

I have a couple of questions / suggestions.
(1) Can you use a bootable disk (USB, etc.) to get into the system?
(2) Do you know which file or files are missing and where they belong? If
not, can you find out?
(3) Worst case, do you have a second computer that you can install (add) the
hard drive as a second one.
Then you could use the operating system from the other computer to look at
the contents of the hard drive that has the problems. Then you can fix the
files or perhaps with a flashdrive you could copy the files (your
substantial amount of work) to it and then to another computer.
Tom

It's not any file that's messed up. The issue is twofold: first, MMC allows
(as it did in XP) you to reduce the number of admins to 1 (the built-in).
However, in Vista, the admin account is disabled, which leads to a problem
that didn't show up in XP. While this is something the user is doing, for
one Windows UI to protect the user while the other does not is an
inconsistency. I might believe that this is by design except I don't see
anything outside a filestamp to indicate that the user snap-in has been
touched since Win2000 whereas the rest of Vista got the "user-friendly"
treatment.
The 2nd issue - the bigger one - is that while Safe Mode may normally enable
the built-in admin account to prevent this from occurring, it will not
enable it if there is already an enabled admin account - ANY enabled admin
account - is on the machine. In my case, I have a Media Center Extender
admin account ("Mcx1") that is enabled but is not visible on the Welcome
Screen; Safe Mode should disregard this type of account because a user
cannot interact with it. Add a second check in Safe Mode - that the enabled
admin account also be visible on the Welcome Screen - the problem should be
reasonably reversable in contrast to what tech support is saying now. (they
will not even ship me a Vista DVD in spite of the fact that I purchased it
from Microsoft Live Marketplace...tech support expects all Vista users to
have a burnable DVD drive. Seriously, I told the guy no less than 5 times in
a row that I didn't have a burner, and he'd keep telling me that "we" need
to burn a DVD. after 3 times of telling him that "we" don't have a burner, I
started yelling it at the guy. To his credit, he didn't hang up (and they're
still not worse than the absolute worst - Best Buy), but I was literally at
hour 6 of tech support calls with Microsoft by that point.

There's a loophole in the Safe Mode method that was found out while on the
phone to someone at Microsoft (some escalated level of support who wound up
solving things). Basically, because I have an Xbox 360, it has a hidden
admin account on the Vista machine (the 360 is a MC extender). When Safe
Mode boots up, it sees that there is an enabled admin account on the machine
and therefore does not enable the built-in Administrator.

The solutions are basically a reinstall or (because my machine did not have
any system restore points...not even Vista's initial install) in my case, I
sent in my SAM file to Microsoft, who were able to remove the MCE admin
account, I went back into WinRE and replaced my SAM with that one. The only
downside is that I have to reconnect my 360 to my machine, but that is a
very trivial downside considering the alternatives.

On Tue, 27 Mar 2007 02:07:46 -0500, "Keith Patrick"

Thanks for explaining what I see as a BUG in Vista...

>It's not any file that's messed up. The issue is twofold: first, MMC allows
>(as it did in XP) you to reduce the number of admins to 1 (the built-in).
>However, in Vista, the admin account is disabled, which leads to a problem
>that didn't show up in XP. While this is something the user is doing, for
>one Windows UI to protect the user while the other does not is an
>inconsistency. I might believe that this is by design except I don't see
>anything outside a filestamp to indicate that the user snap-in has been
>touched since Win2000 whereas the rest of Vista got the "user-friendly"
>treatment.

Looks like a "assed < fully" implimentation bug...

>The 2nd issue - the bigger one - is that while Safe Mode may normally enable
>the built-in admin account to prevent this from occurring, it will not
>enable it if there is already an enabled admin account - ANY enabled admin
>account - is on the machine. In my case, I have a Media Center Extender
>admin account ("Mcx1") that is enabled but is not visible on the Welcome
>Screen; Safe Mode should disregard this type of account because a user
>cannot interact with it. Add a second check in Safe Mode - that the enabled
>admin account also be visible on the Welcome Screen - the problem should be
>reasonably reversable in contrast to what tech support is saying now.

>...tech support expects all Vista users to have a burnable DVD drive.
>Seriously, I told the guy no less than 5 times in a row that I didn't have
>a burner, and he'd keep telling me that "we" need to burn a DVD.

>after 3 times of telling him that "we" don't have a burner, I started
>yelling it at the guy. To his credit, he didn't hang up (and they're
>still not worse than the absolute worst - Best Buy), but I was literally at
>hour 6 of tech support calls with Microsoft by that point.

Ouch. Er... get a DVD writer ;-)

Now that Vista ships on DVD and DVD writers are ubiquitous and cheap,
there's only one reason to delay getting a DVD writer (IMO, new PCs
should ship with DVD writers, period).

That reason is current DVD writers still ship with Nero Express 6,
which is STILL not Vista-ready.

If anyone knows a DVD writer brand (other than Sony) that ships with
Vista-ready bundleware, doooo let me know pleeease!

Here's a possible way to get into Safe Mode in Vista... but <ahem" you
prolly need admin-rights Regedit :-/

Safe Mode Cmd Only is internally referred to as "Safe Mode Alternate
Shell". Settings that control Safe Mode reside in...

HKLM\System\ControlSet???\SafeBoot

....or similar (this is from memory, and my memory would fail
MemTest86). Most of this is protected against casual editing and
programmatic changes, with one notable exception; the Alternate Shell
value, which can be set to point to something other than Cmd, or
invalidated altogether by pointing it to something that doesn't exist.

If invalidated, then Safe Cmd will boot using Windows Explorer as
shell, in what appears to be a "system account" context (i.e. files
written to "desktop" appear in AllUsers desktop).


Vista has a mOS at least, unlike XP; the Vista DVD (er...) will boot
into a maintenance command prompt that is akin to (if not exactly
identical to) WinPE or WinRE.

The flipside is that XP-based Bart will not see Vista's registry hives
via RunScanner.

The downside is that Vista's mOS toolset lacks an equivalent to
Paraglider's RunScanner plugin for Bart, so you'd have to manually
load the HD installation's hives to RegEdit to edit them.

Still - it's worth a try. What a really crappy bug, tho - reminds me
of "unsupported" (unsupportable) "Previous Version of MS-DOS" in Win95
SR2, where the system would offer this via the UI, boot into it
successfully (assuming no MS-DOS vs. FAT32 issues) but then be utterly
unable to return to Win95 or Win95 DOS mode thereafter.



>--------------- ----- ---- --- -- - - -
Tech Support: The guys who follow the
'Parade of New Products' with a shovel.
>--------------- ----- ---- --- -- - - -

Got it fixed today. It involved emailing my SAM file to someone at Microsoft
for fixing and then going into WinRE to replace it. Definitely not a
recommended path for most, but I was in a real bad bind with this issue (had
a major deadline that this impacted + my machine just so happened to lack
every single fallback available)

On Tue, 27 Mar 2007 19:44:51 -0500, "Keith Patrick"

>Got it fixed today. It involved emailing my SAM file to someone at Microsoft
>for fixing and then going into WinRE to replace it. Definitely not a
>recommended path for most

It's a LOT better than "just" doing a re-install!



>--------------- ----- ---- --- -- - - -
Tech Support: The guys who follow the
'Parade of New Products' with a shovel.
>--------------- ----- ---- --- -- - - -

Sure, but as was explained to me, it's not a general practice of tech
support to work with a customer to send a machine's SAM file to MS for
tweaking and then replacing. It's a very isolated case (andmost user
scenarios would have one of the fallbacks available...the toxic combination
is: having a Media Center edition of Vista, demoting your user via Computer
Management instead of Control Panel, buying Vista electronically, owning
just a DVD reader, having System Restore off (although I don't recall ever
disabling it on XP and I distinctly remember using it at least twice on XP),
AND having a Media Center Extender setup on the Vista machine), and swapping
out the SAM file from WinRE is on par with hacking the local machine
registry key.

I'm really hoping I see this show up as a fix in the first SP fix list (IMO,
Safe Mode needs to ensure that any admin accounts it finds are visible to
the Welcome screen before deciding not to enable the built-in admin account,
and also the MMC snap-in needs to be updated to protect the user in the same
way the control planel applet does)