Software Crash

americancritic

Vista Guru
Gold Member
Hello I need some help

I have had some problems lately with my system and the night before last my whole system went down the screen would flash blue then it flashed black and then the boot windows came up and then all flased at the same time and then just a black screen and nothing, I powered off and tried to reboot and it did the same things I was not able to get into safe mode so I tried a factory restore. Well I have 4 disk's from the factory and my system only would install the first one and not the rest. My computer is running right now but it's not like it's suppose to be lotes of red and yellow errors all over the place.

While the computer was in the factory restore mode it said it was fromatting the partition which is only 15% of the hard drive it that's the case the rest of C: the hard drive is corrupted still.

I can also use my daughters computer to retrive my email from Cox Communication's if needed.

Help

Tom
 

My Computer

System One

  • Manufacturer/Model
    a6530f Desktop
    CPU
    HP-PAVILION
    Motherboard
    M2N68-LA (Narra3)
    Memory
    8 Gigs of Ram/DDR2 PC2-6400 MB/sec
    Graphics Card(s)
    NVIDIA GeForce 6150SE nForce 430
    Sound Card
    Intergrated Realtex ALC888S Audio
    Monitor(s) Displays
    LG W40 series widescreen
    Screen Resolution
    1600 X 900
    Hard Drives
    1 640 GB Sata transfer rating: 3.0 Gb/sec speed: 7200 RPM
    PSU
    300W
    Case
    Mid-Size ATX
    Keyboard
    HP Multimedia Keyboard
    Mouse
    Microsoft Wireless Mouse 5000
    Other Info
    Processor: AMD Phenom X3 8450 Operating speed: Up to 2.1 GHz, Number of cores: 3, Socket: AM2+, Bus speed: 3600 MHz HT3 (clocked down to 2000 MHz)

    Modem: 56K WinModem/

    Supermulti: 16X DVD(+/-)R/RW 12X Ram (+/-)R DL Lightscribe SATA Drive

    Menory Card Reader: 15-in-1 Multimedia Card Reader

    Media Drive
Hello

Since I have having problems with my computer I have tried the following.

Ran a full AV...
Ran a full scan in Malwarebytes...
Used system restore to a month ago...
sfc /scannow--report says there ws one corrupt file...
Ran a full CHKDSK--which was OK...
Safe mode did the same things as far as flashing screen...

Now since the computer only installed one disk I am stuck for options.

I put in the factory restore disk and turned my computer off, then I restarted and about a minute later it came on and asked how I wanted to proceed and I click advanced and went for the full factory restore and it would do only the # 1 disk and then went to right into setup from there to my logon screen.

I tried 3 times to set it back to factory spec's and each time it would only load the # 1 disk.
 

My Computer

System One

  • Manufacturer/Model
    a6530f Desktop
    CPU
    HP-PAVILION
    Motherboard
    M2N68-LA (Narra3)
    Memory
    8 Gigs of Ram/DDR2 PC2-6400 MB/sec
    Graphics Card(s)
    NVIDIA GeForce 6150SE nForce 430
    Sound Card
    Intergrated Realtex ALC888S Audio
    Monitor(s) Displays
    LG W40 series widescreen
    Screen Resolution
    1600 X 900
    Hard Drives
    1 640 GB Sata transfer rating: 3.0 Gb/sec speed: 7200 RPM
    PSU
    300W
    Case
    Mid-Size ATX
    Keyboard
    HP Multimedia Keyboard
    Mouse
    Microsoft Wireless Mouse 5000
    Other Info
    Processor: AMD Phenom X3 8450 Operating speed: Up to 2.1 GHz, Number of cores: 3, Socket: AM2+, Bus speed: 3600 MHz HT3 (clocked down to 2000 MHz)

    Modem: 56K WinModem/

    Supermulti: 16X DVD(+/-)R/RW 12X Ram (+/-)R DL Lightscribe SATA Drive

    Menory Card Reader: 15-in-1 Multimedia Card Reader

    Media Drive
Back
Top