• This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn more.

Restart, shutdown, etc. missing from start menu

vdesai

New Member
Messages
5
#1
Ok my problem is that suddenly some of the entries disappeared from the menu that comes up in the start menu, I have googled to see it there is a solution and it was not, tried system restore, and I even replaced patched uxtheme (and other) file(s) to the originals. Ill attach my CBS.log from the sfc scan. Images of the problem below.



how it should look is:



Thank you for your help :)

Sorry Had to zip the log up.
 

Attachments

My Computer

johngalt

Antidisestablishmentarian
Vista Guru
Messages
3,921
Location
3rd Rock
#2
I am not sure why, and I am not an expert in reading CBS.logs, but it seemed to me that there are *way* too many entries for things that were fixed.

I would get some HD diagnostics from your HD manufacturer, and check the HD 0- and if all goes well, then re-install.
 

My Computers

System One System Two

  • Operating System
    Windows 10 Insider Preview current build
    Manufacturer/Model
    The Beast Model V
    CPU
    Intel Core i7 965 EE @ 3.6 GHz
    Motherboard
    eVGA X58 Classified3
    Memory
    3 * 4GB Mushkin Enhanced Redline CL7 DDR3 1600 MHz (PC3-12800)
    Graphics Card(s)
    eVGA GTX 970 + eVGA GTX 560 Ti 448 Core Classified (PhysX)
    Sound Card
    Realtek HD Audio (onboard)
    Monitor(s) Displays
    2 * Lenovo LT2323pwA
    Screen Resolution
    2 * 1920 x 1080
    Hard Drives
    SanDisk Ultra SDSSDHII-960G-G25 SATA III SSD (System)
    Crucial MX100 CT256MX100SSD1 SATA III SSD (User Tree)
    2 * Seagate Barracuda 7200.12 ST31000528AS SATA II
    Seagate ST1500DL001 7200 RPM SATA II
    Intel SSDSA2M080G2GC SATA II SSD
    PSU
    ThermalTake BlackWidow 850W
    Case
    ThermalTake Level 10 GT
    Cooling
    Corsair H100 (CPU) + Air (2 * 210 mm + 3 * 120mm fans)
    Mouse
    Logitech MX Master
    Keyboard
    Logitech G15 (gen 2)
    Internet Speed
    300+ Mbps downstream / 30+ Mbps upstream
  • Operating System
    Windows 10 Insider Preview (current)
    Manufacturer/Model
    Dell Inspiron 3521
    CPU
    Intel(R) Celeron(R) CPU 1007U @ 1.50GHz
    Motherboard
    Dell
    Memory
    8 GB
    Graphics card(s)
    Intel(R) HD Graphics
    Sound Card
    Intel(R) Display Audio | Realtek Audio
    Monitor(s) Displays
    Inspiron 15"
    Screen Resolution
    1680 * 1050
    Hard Drives
    INTEL SSDSC2CW180A
    PSU
    Dell
    Case
    Dell
    Cooling
    Dell
    Mouse
    Logitech MX Master | Synaptics TouchPad
    Keyboard
    Dell
    Internet Speed
    300+ Mbps downstream | 30+ Mbps upstream

sidney1st

Member
Vista Guru
Messages
968
Location
Paris
#3
and I even replaced patched uxtheme (and other) file(s) to the originals
Using uxtheme may occur a lot of problems with sp1.

Open gpedit.
Go to User configuration/Administrative templates/Start menu and Taskbar/
set the remove and prevent access to the shutdown ........... to its default value.
 

My Computer

Bare Foot Kid

R.I.P. August 13th 2014
Messages
2,616
Location
The Lowcountry
#4

My Computer

System One

  • Manufacturer/Model
    * BFK Customs *
    CPU
    Intel C2Q 9550 Yorkfield
    Motherboard
    ASUS P5Q Pro
    Memory
    8GB Dominator 8500C5D
    Graphics Card(s)
    XFX ATI 1GB 4870 XXX
    Sound Card
    Realtek HD 7-1
    Monitor(s) Displays
    1x 47" LCD HDMI & 2x 26" LCD HDMI
    Screen Resolution
    1920x1080P & 1920x1200
    Hard Drives
    2x 500GB 7200RPM 32MB Cache WD Caviar Black
    PSU
    Corsair 620HX
    Case
    CM Cosmos RC-1000
    Cooling
    Tuniq Tower 120, 2x 140mm and 3x 120mm case fans
    Mouse
    Razer Diamondback 3G
    Keyboard
    HP Enhansed Multimedia
    Internet Speed
    18.6Mb/s
    Other Info
    My First Build ;)

vdesai

New Member
Messages
5
#5
Ill give these suggestions a try once I go home thanks for all the help, ya and The CBS.log is from four or five scans :P ill try and do a new scan and clear the cbs log once I get home.
 

My Computer

johngalt

Antidisestablishmentarian
Vista Guru
Messages
3,921
Location
3rd Rock
#6
That would be a lot of help - let's see what your current status is in regards to the cbs logs and try the suggestions given to see if you can get it fixed - obviously, a reinstall takes tie and you want to avoid that if possible....
 

My Computers

System One System Two

  • Operating System
    Windows 10 Insider Preview current build
    Manufacturer/Model
    The Beast Model V
    CPU
    Intel Core i7 965 EE @ 3.6 GHz
    Motherboard
    eVGA X58 Classified3
    Memory
    3 * 4GB Mushkin Enhanced Redline CL7 DDR3 1600 MHz (PC3-12800)
    Graphics Card(s)
    eVGA GTX 970 + eVGA GTX 560 Ti 448 Core Classified (PhysX)
    Sound Card
    Realtek HD Audio (onboard)
    Monitor(s) Displays
    2 * Lenovo LT2323pwA
    Screen Resolution
    2 * 1920 x 1080
    Hard Drives
    SanDisk Ultra SDSSDHII-960G-G25 SATA III SSD (System)
    Crucial MX100 CT256MX100SSD1 SATA III SSD (User Tree)
    2 * Seagate Barracuda 7200.12 ST31000528AS SATA II
    Seagate ST1500DL001 7200 RPM SATA II
    Intel SSDSA2M080G2GC SATA II SSD
    PSU
    ThermalTake BlackWidow 850W
    Case
    ThermalTake Level 10 GT
    Cooling
    Corsair H100 (CPU) + Air (2 * 210 mm + 3 * 120mm fans)
    Mouse
    Logitech MX Master
    Keyboard
    Logitech G15 (gen 2)
    Internet Speed
    300+ Mbps downstream / 30+ Mbps upstream
  • Operating System
    Windows 10 Insider Preview (current)
    Manufacturer/Model
    Dell Inspiron 3521
    CPU
    Intel(R) Celeron(R) CPU 1007U @ 1.50GHz
    Motherboard
    Dell
    Memory
    8 GB
    Graphics card(s)
    Intel(R) HD Graphics
    Sound Card
    Intel(R) Display Audio | Realtek Audio
    Monitor(s) Displays
    Inspiron 15"
    Screen Resolution
    1680 * 1050
    Hard Drives
    INTEL SSDSC2CW180A
    PSU
    Dell
    Case
    Dell
    Cooling
    Dell
    Mouse
    Logitech MX Master | Synaptics TouchPad
    Keyboard
    Dell
    Internet Speed
    300+ Mbps downstream | 30+ Mbps upstream

vdesai

New Member
Messages
5
#7
I gave them all a try, did a chkdsk and scanned my disk to see if it was going bad but nope no problems there. And I have the new log attached. From what I can tell the only corrupt file is shellbrd.dll if nothing works ill just try a repair install and if that doesn't work clean install ftw.
 

Attachments

Last edited:

My Computer

Users Who Are Viewing This Thread (Users: 1, Guests: 0)