Re: Vista Service Pack 2/3 - 0xc01a001d


  1.    26 Jun 2009 #1
    PA Bear [MS MVP] Guest

    Re: Vista Service Pack 2/3 - 0xc01a001d


    [Crossposted to Vista General]

    Please read all three (3) sections of this reply.

    SECTION #1

    Free unlimited installation and compatibility support is available for
    Windows Vista, but only for Service Pack 2 (SP2). This support for Windows
    Vista Service Pack 2 (SP2) is valid until November 26, 2009. Availability of
    chat or e-mail support differs depending on your geographic location. Go to
    http://support.microsoft.com/oas/def...4&gprid=582034 &
    select appropriate category (e.g., Installation).

    ============================================================

    SECTION #2

    C01A001D = STATUS_LOG_FULL
    Log space is exhausted.

    <QP>
    Generally, these errors can occur if the system files are corrupted.

    To make clear the current situation, I recommend downloading Windows Vista
    Service Pack 2] in Normal Mode and installing it in Clean Boot Mode. Please
    follow the steps below.

    Note: This SP2 installation can be affected by certain third party programs
    running in the background. If you are running any third party applications
    such as Spyblocker, Internet or web accelerators (programs designed to boost
    the speed of the Internet connection), security or anti-virus programs
    (McAfee, Norton, etc.), I recommend we temporarily disable or shut them down
    during our troubleshooting process. Please be sure to enable them again when
    the update process has been completed.

    Step 1: Download Windows Vista Service Pack 2 Standalone Installer
    ===================================================
    1. Download Windows Vista SP2 from the link below according to your System
    Type:

    ....Windows Vista Service Pack 2 - Five Language Standalone for x32-based
    systems (Size: 348.3 MB)
    http://www.microsoft.com/downloads/d...2-a5c3199ea2b3

    ....Windows Vista Service Pack 2 - Five Language Standalone for x64-based
    systems (Size: 577.4MB)
    http://download.microsoft.com/downlo...-X64-wave0.exe

    2. Save the download to your desktop, do not Run it!

    Step 2: Install Windows Vista SP2 in Clean Boot mode
    ========================================
    Please disable all startup items and third party services when booting to
    avoid conflict when installing Vista SP1:

    1. Click "Start", type: MSCONFIG in the search box and press Enter.

    Note: Please click "Continue" if the "User Account Control" window pops up.

    2. Click "Services", check the "Hide All Microsoft Services" box and click
    "Disable All" (if it is not gray).
    3. Click "Startup", click "Disable All" and click "OK".

    Note: Temporarily disabling the Startup Group only prevents the startup
    programs from loading at startup. This shouldn't affect the system or other
    programs. We can manually run these programs later. Go ahead and reboot your
    system when prompted as you are exiting MsConfig.

    4. After rebooting, right-click on the downloaded Windows Vista Service Pack
    2 Standalone Installer, select "Run as Administrator" (if necessary) and
    follow the instructions to install Windows Vista SP2.

    To restore the computer to use a Normal Startup, repeat step 1 above. Then
    click "Normal Startup" on the General tab, click "OK", and then restart the
    computer.
    </QP>
    Modified from original MS Support source as quoted in
    http://social.technet.microsoft.com/...-fb58c5da5ad0/


    ============================================================

    SECTION #3

    How to troubleshoot Windows Vista and Windows Server 2008 service pack
    installation issues
    http://support.microsoft.com/kb/947366

    Error message when you try to install Windows Vista Service Pack 2 or
    Windows Server 2008 Service Pack 2: "An internal error occurred while
    installing the service pack":
    http://support.microsoft.com/kb/967818

    Installation Tips:

    • Your computer will restart several times during the installation process:
    Make certain you've saved your work and closed all open applications before
    beginning the install.

    • Disable (1) your anti-virus application, (2) any real-time system
    protections afforded by any anti-spyware applications (except Defender), &
    (3) your third-party firewall (if any) and then (4) enable the Windows
    Firewall _before installing or uninstalling_ Vista SP2.

    • The installation process can take an hour or more: If you're installing
    SP2 on a portable computer, make sure that you plug-in the power cord and
    have the battery inserted into its bay.

    • Vista SP1 is a prerequisite for installing SP2. If you use Windows Update
    or the Automatic Update feature in Windows Vista, you will not be offered
    the option to install SP2 until you first install SP1.
    --
    ~Robear Dyer (PA Bear)
    MS MVP-IE, Mail, Security, Windows Client - since 2002


    Pud wrote:

    > Apologies if this has been raised and answered before but I have Google'd
    > it
    > and there does not appear to be a definitive answer.
    >
    > After installing Service Pack on Windows Vista Home Premium and after the
    > machine reboots I get the following 'stuck' message:
    >
    > !! 0xc01a001d !! 28459/93831 (\Registry\Machine\COMPONENTS\DerivedData...)
    >
    > and it never changes.
    >
    > Have had to use 'System Restore' to get back to a working machine (pre
    > Service Pack).
    >
    > How can I get the Service Pack installed?
      My System SpecsSystem Spec

  2.    26 Jun 2009 #2
    Pud Guest

    Re: Vista Service Pack 2/3 - 0xc01a001d


    Thank you for your answer PA Bear. It would have helped you had I got my
    Service Pack numbers right. I got myself a bit confused between Vista and XP
    SP numbers obviously.

    To clarify, the machine has Vista Home Premium without Service Pack. I have
    been trying to get SP1 installed and get the error message.

    Am I right in assuming your answer holds for both SP1 and SP2 installs?

    Thanks

    "PA Bear [MS MVP]" wrote:

    > [Crossposted to Vista General]
    >
    > Please read all three (3) sections of this reply.
    >
    > SECTION #1
    >
    > Free unlimited installation and compatibility support is available for
    > Windows Vista, but only for Service Pack 2 (SP2). This support for Windows
    > Vista Service Pack 2 (SP2) is valid until November 26, 2009. Availability of
    > chat or e-mail support differs depending on your geographic location. Go to
    > http://support.microsoft.com/oas/def...4&gprid=582034 &
    > select appropriate category (e.g., Installation).
    >
    > ============================================================
    >
    > SECTION #2
    >
    > C01A001D = STATUS_LOG_FULL
    > Log space is exhausted.
    >
    > <QP>
    > Generally, these errors can occur if the system files are corrupted.
    >
    > To make clear the current situation, I recommend downloading Windows Vista
    > Service Pack 2] in Normal Mode and installing it in Clean Boot Mode. Please
    > follow the steps below.
    >
    > Note: This SP2 installation can be affected by certain third party programs
    > running in the background. If you are running any third party applications
    > such as Spyblocker, Internet or web accelerators (programs designed to boost
    > the speed of the Internet connection), security or anti-virus programs
    > (McAfee, Norton, etc.), I recommend we temporarily disable or shut them down
    > during our troubleshooting process. Please be sure to enable them again when
    > the update process has been completed.
    >
    > Step 1: Download Windows Vista Service Pack 2 Standalone Installer
    > ===================================================
    > 1. Download Windows Vista SP2 from the link below according to your System
    > Type:
    >
    > ....Windows Vista Service Pack 2 - Five Language Standalone for x32-based
    > systems (Size: 348.3 MB)
    > http://www.microsoft.com/downloads/d...2-a5c3199ea2b3
    >
    > ....Windows Vista Service Pack 2 - Five Language Standalone for x64-based
    > systems (Size: 577.4MB)
    > http://download.microsoft.com/downlo...-X64-wave0.exe
    >
    > 2. Save the download to your desktop, do not Run it!
    >
    > Step 2: Install Windows Vista SP2 in Clean Boot mode
    > ========================================
    > Please disable all startup items and third party services when booting to
    > avoid conflict when installing Vista SP1:
    >
    > 1. Click "Start", type: MSCONFIG in the search box and press Enter.
    >
    > Note: Please click "Continue" if the "User Account Control" window pops up.
    >
    > 2. Click "Services", check the "Hide All Microsoft Services" box and click
    > "Disable All" (if it is not gray).
    > 3. Click "Startup", click "Disable All" and click "OK".
    >
    > Note: Temporarily disabling the Startup Group only prevents the startup
    > programs from loading at startup. This shouldn't affect the system or other
    > programs. We can manually run these programs later. Go ahead and reboot your
    > system when prompted as you are exiting MsConfig.
    >
    > 4. After rebooting, right-click on the downloaded Windows Vista Service Pack
    > 2 Standalone Installer, select "Run as Administrator" (if necessary) and
    > follow the instructions to install Windows Vista SP2.
    >
    > To restore the computer to use a Normal Startup, repeat step 1 above. Then
    > click "Normal Startup" on the General tab, click "OK", and then restart the
    > computer.
    > </QP>
    > Modified from original MS Support source as quoted in
    > http://social.technet.microsoft.com/...-fb58c5da5ad0/
    >
    >
    > ============================================================
    >
    > SECTION #3
    >
    > How to troubleshoot Windows Vista and Windows Server 2008 service pack
    > installation issues
    > http://support.microsoft.com/kb/947366
    >
    > Error message when you try to install Windows Vista Service Pack 2 or
    > Windows Server 2008 Service Pack 2: "An internal error occurred while
    > installing the service pack":
    > http://support.microsoft.com/kb/967818
    >
    > Installation Tips:
    >
    > • Your computer will restart several times during the installation process:
    > Make certain you've saved your work and closed all open applications before
    > beginning the install.
    >
    > • Disable (1) your anti-virus application, (2) any real-time system
    > protections afforded by any anti-spyware applications (except Defender), &
    > (3) your third-party firewall (if any) and then (4) enable the Windows
    > Firewall _before installing or uninstalling_ Vista SP2.
    >
    > • The installation process can take an hour or more: If you're installing
    > SP2 on a portable computer, make sure that you plug-in the power cord and
    > have the battery inserted into its bay.
    >
    > • Vista SP1 is a prerequisite for installing SP2. If you use Windows Update
    > or the Automatic Update feature in Windows Vista, you will not be offered
    > the option to install SP2 until you first install SP1.
    > --
    > ~Robear Dyer (PA Bear)
    > MS MVP-IE, Mail, Security, Windows Client - since 2002
    >
    >
    > Pud wrote:

    > > Apologies if this has been raised and answered before but I have Google'd
    > > it
    > > and there does not appear to be a definitive answer.
    > >
    > > After installing Service Pack on Windows Vista Home Premium and after the
    > > machine reboots I get the following 'stuck' message:
    > >
    > > !! 0xc01a001d !! 28459/93831 (\Registry\Machine\COMPONENTS\DerivedData...)
    > >
    > > and it never changes.
    > >
    > > Have had to use 'System Restore' to get back to a working machine (pre
    > > Service Pack).
    > >
    > > How can I get the Service Pack installed?
    >
    >
      My System SpecsSystem Spec

  3.    26 Jun 2009 #3
    PA Bear [MS MVP] Guest

    Re: Vista Service Pack 2/3 - 0xc01a001d


    The no-charge support link
    (http://support.microsoft.com/oas/def...4&gprid=582034) is
    for SP2 now but try it anyway since SP1 is a requirement for installing SP2.

    The download links for SP1 are different, of course:

    Vista SP1 Five Language Standalone for 32-bit
    http://www.microsoft.com/downloads/d...9-cb3d06d12674

    Vista SP1 Five Language Standalone for 64-bit
    http://www.microsoft.com/downloads/d...b-d71eda5ec07c
    --
    ~PA Bear

    Pud wrote:

    > Thank you for your answer PA Bear. It would have helped you had I got my
    > Service Pack numbers right. I got myself a bit confused between Vista and
    > XP SP numbers obviously.
    >
    > To clarify, the machine has Vista Home Premium without Service Pack. I
    > have
    > been trying to get SP1 installed and get the error message.
    >
    > Am I right in assuming your answer holds for both SP1 and SP2 installs?
    >
    > Thanks
    >
    > "PA Bear [MS MVP]" wrote:

    >> [Crossposted to Vista General]
    >>
    >> Please read all three (3) sections of this reply.
    >>
    >> SECTION #1
    >>
    >> Free unlimited installation and compatibility support is available for
    >> Windows Vista, but only for Service Pack 2 (SP2). This support for
    >> Windows
    >> Vista Service Pack 2 (SP2) is valid until November 26, 2009. Availability
    >> of chat or e-mail support differs depending on your geographic location.
    >> Go to
    >> http://support.microsoft.com/oas/def...4&gprid=582034 &
    >> select appropriate category (e.g., Installation).
    >>
    >> ============================================================
    >>
    >> SECTION #2
    >>
    >> C01A001D = STATUS_LOG_FULL
    >> Log space is exhausted.
    >>
    >> <QP>
    >> Generally, these errors can occur if the system files are corrupted.
    >>
    >> To make clear the current situation, I recommend downloading Windows
    >> Vista
    >> Service Pack 2] in Normal Mode and installing it in Clean Boot Mode.
    >> Please
    >> follow the steps below.
    >>
    >> Note: This SP2 installation can be affected by certain third party
    >> programs
    >> running in the background. If you are running any third party
    >> applications
    >> such as Spyblocker, Internet or web accelerators (programs designed to
    >> boost the speed of the Internet connection), security or anti-virus
    >> programs (McAfee, Norton, etc.), I recommend we temporarily disable or
    >> shut them down during our troubleshooting process. Please be sure to
    >> enable them again when the update process has been completed.
    >>
    >> Step 1: Download Windows Vista Service Pack 2 Standalone Installer
    >> ===================================================
    >> 1. Download Windows Vista SP2 from the link below according to your
    >> System
    >> Type:
    >>
    >> ....Windows Vista Service Pack 2 - Five Language Standalone for x32-based
    >> systems (Size: 348.3 MB)
    >> http://www.microsoft.com/downloads/d...2-a5c3199ea2b3
    >>
    >> ....Windows Vista Service Pack 2 - Five Language Standalone for x64-based
    >> systems (Size: 577.4MB)
    >> http://download.microsoft.com/downlo...-X64-wave0.exe
    >>
    >> 2. Save the download to your desktop, do not Run it!
    >>
    >> Step 2: Install Windows Vista SP2 in Clean Boot mode
    >> ========================================
    >> Please disable all startup items and third party services when booting to
    >> avoid conflict when installing Vista SP1:
    >>
    >> 1. Click "Start", type: MSCONFIG in the search box and press Enter.
    >>
    >> Note: Please click "Continue" if the "User Account Control" window pops
    >> up.
    >>
    >> 2. Click "Services", check the "Hide All Microsoft Services" box and
    >> click
    >> "Disable All" (if it is not gray).
    >> 3. Click "Startup", click "Disable All" and click "OK".
    >>
    >> Note: Temporarily disabling the Startup Group only prevents the startup
    >> programs from loading at startup. This shouldn't affect the system or
    >> other
    >> programs. We can manually run these programs later. Go ahead and reboot
    >> your system when prompted as you are exiting MsConfig.
    >>
    >> 4. After rebooting, right-click on the downloaded Windows Vista Service
    >> Pack 2 Standalone Installer, select "Run as Administrator" (if necessary)
    >> and follow the instructions to install Windows Vista SP2.
    >>
    >> To restore the computer to use a Normal Startup, repeat step 1 above.
    >> Then
    >> click "Normal Startup" on the General tab, click "OK", and then restart
    >> the
    >> computer.
    >> </QP>
    >> Modified from original MS Support source as quoted in
    >> http://social.technet.microsoft.com/...-fb58c5da5ad0/
    >>
    >>
    >> ============================================================
    >>
    >> SECTION #3
    >>
    >> How to troubleshoot Windows Vista and Windows Server 2008 service pack
    >> installation issues
    >> http://support.microsoft.com/kb/947366
    >>
    >> Error message when you try to install Windows Vista Service Pack 2 or
    >> Windows Server 2008 Service Pack 2: "An internal error occurred while
    >> installing the service pack":
    >> http://support.microsoft.com/kb/967818
    >>
    >> Installation Tips:
    >>
    >> • Your computer will restart several times during the installation
    >> process:
    >> Make certain you've saved your work and closed all open applications
    >> before
    >> beginning the install.
    >>
    >> • Disable (1) your anti-virus application, (2) any real-time system
    >> protections afforded by any anti-spyware applications (except Defender),
    >> &
    >> (3) your third-party firewall (if any) and then (4) enable the Windows
    >> Firewall _before installing or uninstalling_ Vista SP2.
    >>
    >> • The installation process can take an hour or more: If you're installing
    >> SP2 on a portable computer, make sure that you plug-in the power cord and
    >> have the battery inserted into its bay.
    >>
    >> • Vista SP1 is a prerequisite for installing SP2. If you use Windows
    >> Update
    >> or the Automatic Update feature in Windows Vista, you will not be offered
    >> the option to install SP2 until you first install SP1.
    >> --
    >> ~Robear Dyer (PA Bear)
    >> MS MVP-IE, Mail, Security, Windows Client - since 2002
    >>
    >>
    >> Pud wrote:

    >>> Apologies if this has been raised and answered before but I have
    >>> Google'd
    >>> it
    >>> and there does not appear to be a definitive answer.
    >>>
    >>> After installing Service Pack on Windows Vista Home Premium and after
    >>> the
    >>> machine reboots I get the following 'stuck' message:
    >>>
    >>> !! 0xc01a001d !! 28459/93831
    >>> (\Registry\Machine\COMPONENTS\DerivedData...)
    >>>
    >>> and it never changes.
    >>>
    >>> Have had to use 'System Restore' to get back to a working machine (pre
    >>> Service Pack).
    >>>
    >>> How can I get the Service Pack installed?
      My System SpecsSystem Spec

  4.    29 Jun 2009 #4
    Parrott Guest

    Re: Vista Service Pack 2/3 - 0xc01a001d



    "PA Bear [MS MVP]" <PABearMVP@xxxxxx> wrote in message
    news:u9eWo9p9JHA.3964@xxxxxx

    > [Crossposted to Vista General]
    >
    > Please read all three (3) sections of this reply.
    >
    > SECTION #1
    >
    > Free unlimited installation and compatibility support is available for
    > Windows Vista, but only for Service Pack 2 (SP2). This support for Windows
    > Vista Service Pack 2 (SP2) is valid until November 26, 2009. Availability
    > of
    > chat or e-mail support differs depending on your geographic location. Go
    > to
    > http://support.microsoft.com/oas/def...4&gprid=582034 &
    > select appropriate category (e.g., Installation).
    >
    > ============================================================
    >
    > SECTION #2
    >
    > C01A001D = STATUS_LOG_FULL
    > Log space is exhausted.
    >
    > <QP>
    > Generally, these errors can occur if the system files are corrupted.
    >
    > To make clear the current situation, I recommend downloading Windows Vista
    > Service Pack 2] in Normal Mode and installing it in Clean Boot Mode.
    > Please
    > follow the steps below.
    >
    > Note: This SP2 installation can be affected by certain third party
    > programs
    > running in the background. If you are running any third party applications
    > such as Spyblocker, Internet or web accelerators (programs designed to
    > boost
    > the speed of the Internet connection), security or anti-virus programs
    > (McAfee, Norton, etc.), I recommend we temporarily disable or shut them
    > down
    > during our troubleshooting process. Please be sure to enable them again
    > when
    > the update process has been completed.
    >
    > Step 1: Download Windows Vista Service Pack 2 Standalone Installer
    > ===================================================
    > 1. Download Windows Vista SP2 from the link below according to your System
    > Type:
    >
    > ...Windows Vista Service Pack 2 - Five Language Standalone for x32-based
    > systems (Size: 348.3 MB)
    > http://www.microsoft.com/downloads/d...2-a5c3199ea2b3
    >
    > ...Windows Vista Service Pack 2 - Five Language Standalone for x64-based
    > systems (Size: 577.4MB)
    > http://download.microsoft.com/downlo...-X64-wave0.exe
    >
    > 2. Save the download to your desktop, do not Run it!
    >
    > Step 2: Install Windows Vista SP2 in Clean Boot mode
    > ========================================
    > Please disable all startup items and third party services when booting to
    > avoid conflict when installing Vista SP1:
    >
    > 1. Click "Start", type: MSCONFIG in the search box and press Enter.
    >
    > Note: Please click "Continue" if the "User Account Control" window pops
    > up.
    >
    > 2. Click "Services", check the "Hide All Microsoft Services" box and click
    > "Disable All" (if it is not gray).
    > 3. Click "Startup", click "Disable All" and click "OK".
    >
    > Note: Temporarily disabling the Startup Group only prevents the startup
    > programs from loading at startup. This shouldn't affect the system or
    > other
    > programs. We can manually run these programs later. Go ahead and reboot
    > your
    > system when prompted as you are exiting MsConfig.
    >
    > 4. After rebooting, right-click on the downloaded Windows Vista Service
    > Pack
    > 2 Standalone Installer, select "Run as Administrator" (if necessary) and
    > follow the instructions to install Windows Vista SP2.
    >
    > To restore the computer to use a Normal Startup, repeat step 1 above. Then
    > click "Normal Startup" on the General tab, click "OK", and then restart
    > the
    > computer.
    > </QP>
    > Modified from original MS Support source as quoted in
    > http://social.technet.microsoft.com/...-fb58c5da5ad0/
    >
    >

    Running Vista Ultimate and have new updates to install SP1 here. I already
    d/loaded SP1 / SP 2 manually so am asking this; which is better to do; let
    the update automatically install or do it like above?
    Don't want to mess anything up with the installation of SP1 / SP2.

    Thanks for your help

    God Bless... :-)

      My System SpecsSystem Spec

  5.    29 Jun 2009 #5
    PA Bear [MS MVP] Guest

    Re: Vista Service Pack 2/3 - 0xc01a001d


    Please begin a new thread to ask your questions. Thank you.
    --
    ~PA Bear
    "Jesus saves but Moses invests"


    Parrott wrote:
    <snip>

    > Running Vista Ultimate and have new updates to install SP1 here. I already
    > d/loaded SP1 / SP 2 manually so am asking this; which is better to do; let
    > the update automatically install or do it like above?
    > Don't want to mess anything up with the installation of SP1 / SP2.
      My System SpecsSystem Spec

Re: Vista Service Pack 2/3 - 0xc01a001d

Similar Threads
Thread Forum
Will Vista Have a Service Pack 3
Hi guys, I wanted to know whether Vista will have Service Pack 3:) Regards, Hariharan
General Discussion
vista service pack 3
hello it might sound to you stupid !but my vista shows service pack 3 but I installed vista with service pack 1 dvd !how does it shows service pack 3>
General Discussion
Windows Service Pack 1 and Service Pack 2
Hi, I bought my cpu in June of 08. I have been having problems. I'm trying to fix them one by one. I was wondering if I had the correct Service...
Windows Updates
Vista Service Pack 2
I have downloaded and installed portions of Service Pack 2 for Vista, which brought me to Build6002. Does anyone have info as to when one can expect...
Vista General
Vista Service Pack 1
Is Service Pack 1 officially available and will it down load automatically? I can see all kinds of problems being reported by many downloader's that...
Vista General
Vista Service Pack
by mid or end of july 2007, sp1 for vista (official) shall be out. read it somewhere online, "LW_Greeney" <LWGreeney@discussions.microsoft.com>...
Vista General
when will we get service pack (1) for vista
When will we get service pack 1 for windows vista, will we get it before summer end's Thank's IQON
Vista General

Our Sites
  • Ten Forums
  • Eight Forums
  • Seven Forums
  • Help Me Bake
  • Site Links
  • Contact Us
  • Privacy and Cookies
  • About Us
    Windows Vista Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

    Designer Media Ltd
    All times are GMT -5. The time now is 15:53.
    .