Port 3389 blocked or locked , could use some help


  1.    19 Mar 2008 #1
    Mark Guest

    Port 3389 blocked or locked , could use some help


    I login remotely to 3 servers, and if I choose 5 clients. I have full
    administrator rights.



    Suddenly, I am not able to remote into Client 01( Windows Vista)



    Our MS Pro says someone or something has blocked or locked :3389 and he does
    not know how to either rebuild it or fix it.



    The client, is a fairly new Dual Core Vista Machine and I was logging into
    it just fine, until...A major Software program was installed, and certain
    permissions were accessed (I do not know which ones). Then it blocked me. It
    is locked or blocked. We can't seem to find the one thing we need to get it
    back.



    The permissions pertained to multiple users ,using the same program on our
    application Server. No one, including the MS Pro would have purposely shut
    that port down.



    What I am looking at from my out of town side is: A BRICK



    It Says: Connectiveity to the Remote Computer could not be established.
    Ensure that the remote computer is on and connected to the Small Business
    Server network.



    It is ON!



    I'm toast. Ideas and direction, not only for me, but, our MS Pro. Any help?
    I know our Pro should know the answer, but alas we are here.



    Thanks Mark

      My System SpecsSystem Spec

  2.    19 Mar 2008 #2
    Robert L. \(MS-MVP\) Guest

    Re: Port 3389 blocked or locked , could use some help


    Can you telnet port 3389?

    --
    Bob Lin, MS-MVP, MCSE & CNE
    Networking, Internet, Routing, VPN Troubleshooting on
    http://www.ChicagoTech.net
    How to Setup Windows, Network, VPN & Remote Access on
    http://www.HowToNetworking.com
    "Mark" <Mark@xxxxxx> wrote in message
    news:600A7712-18B5-470F-B294-4E29FC458B5A@xxxxxx

    >I login remotely to 3 servers, and if I choose 5 clients. I have full
    > administrator rights.
    >
    >
    >
    > Suddenly, I am not able to remote into Client 01( Windows Vista)
    >
    >
    >
    > Our MS Pro says someone or something has blocked or locked :3389 and he
    > does
    > not know how to either rebuild it or fix it.
    >
    >
    >
    > The client, is a fairly new Dual Core Vista Machine and I was logging into
    > it just fine, until...A major Software program was installed, and certain
    > permissions were accessed (I do not know which ones). Then it blocked me.
    > It
    > is locked or blocked. We can't seem to find the one thing we need to get
    > it
    > back.
    >
    >
    >
    > The permissions pertained to multiple users ,using the same program on our
    > application Server. No one, including the MS Pro would have purposely shut
    > that port down.
    >
    >
    >
    > What I am looking at from my out of town side is: A BRICK
    >
    >
    >
    > It Says: Connectiveity to the Remote Computer could not be established.
    > Ensure that the remote computer is on and connected to the Small Business
    > Server network.
    >
    >
    >
    > It is ON!
    >
    >
    >
    > I'm toast. Ideas and direction, not only for me, but, our MS Pro. Any
    > help?
    > I know our Pro should know the answer, but alas we are here.
    >
    >
    >
    > Thanks Mark
    >
      My System SpecsSystem Spec

  3.    19 Mar 2008 #3
    Sooner Al [MVP] Guest

    Re: Port 3389 blocked or locked , could use some help


    "Mark" <Mark@xxxxxx> wrote in message
    news:600A7712-18B5-470F-B294-4E29FC458B5A@xxxxxx

    >I login remotely to 3 servers, and if I choose 5 clients. I have full
    > administrator rights.
    >
    >
    >
    > Suddenly, I am not able to remote into Client 01( Windows Vista)
    >
    >
    >
    > Our MS Pro says someone or something has blocked or locked :3389 and he
    > does
    > not know how to either rebuild it or fix it.
    >
    >
    >
    > The client, is a fairly new Dual Core Vista Machine and I was logging into
    > it just fine, until...A major Software program was installed, and certain
    > permissions were accessed (I do not know which ones). Then it blocked me.
    > It
    > is locked or blocked. We can't seem to find the one thing we need to get
    > it
    > back.
    >
    >
    >
    > The permissions pertained to multiple users ,using the same program on our
    > application Server. No one, including the MS Pro would have purposely shut
    > that port down.
    >
    >
    >
    > What I am looking at from my out of town side is: A BRICK
    >
    >
    >
    > It Says: Connectiveity to the Remote Computer could not be established.
    > Ensure that the remote computer is on and connected to the Small Business
    > Server network.
    >
    >
    >
    > It is ON!
    >
    >
    >
    > I'm toast. Ideas and direction, not only for me, but, our MS Pro. Any
    > help?
    > I know our Pro should know the answer, but alas we are here.
    >
    >
    >
    > Thanks Mark
    >
    I would post this to the microsoft.public.windows.server.sbs news group.


    --

    Al Jarvi (MS-MVP Windows – Desktop User Experience)

    Please post *ALL* questions and replies to the news group for the
    mutual benefit of all of us...
    The MS-MVP Program - http://mvp.support.microsoft.com
    This posting is provided "AS IS" with no warranties, and confers no
    rights...
    How to ask a question
    http://support.microsoft.com/KB/555375

      My System SpecsSystem Spec

  4.    20 Mar 2008 #4
    Jim Guest

    RE: Port 3389 blocked or locked , could use some help




    "Mark" wrote:

    > I login remotely to 3 servers, and if I choose 5 clients. I have full
    > administrator rights.
    >
    >
    >
    > Suddenly, I am not able to remote into Client 01( Windows Vista)
    >
    >
    >
    > Our MS Pro says someone or something has blocked or locked :3389 and he does
    > not know how to either rebuild it or fix it.
    >
    >
    >
    > The client, is a fairly new Dual Core Vista Machine and I was logging into
    > it just fine, until...A major Software program was installed, and certain
    > permissions were accessed (I do not know which ones). Then it blocked me. It
    > is locked or blocked. We can't seem to find the one thing we need to get it
    > back.
    >
    >
    >
    > The permissions pertained to multiple users ,using the same program on our
    > application Server. No one, including the MS Pro would have purposely shut
    > that port down.
    >
    >
    >
    > What I am looking at from my out of town side is: A BRICK
    >
    >
    >
    > It Says: Connectiveity to the Remote Computer could not be established.
    > Ensure that the remote computer is on and connected to the Small Business
    > Server network.
    >
    >
    >
    > It is ON!
    >
    >
    >
    > I'm toast. Ideas and direction, not only for me, but, our MS Pro. Any help?
    > I know our Pro should know the answer, but alas we are here.
    >
    >
    >
    > Thanks Mark
    >
      My System SpecsSystem Spec

  5.    20 Mar 2008 #5
    Jim Guest

    RE: Port 3389 blocked or locked , could use some help


    Is SP1 installed on the Vista Computer.
    I had the same problem. It seems that SP1 disables that port...

    "Mark" wrote:

    > I login remotely to 3 servers, and if I choose 5 clients. I have full
    > administrator rights.
    >
    >
    >
    > Suddenly, I am not able to remote into Client 01( Windows Vista)
    >
    >
    >
    > Our MS Pro says someone or something has blocked or locked :3389 and he does
    > not know how to either rebuild it or fix it.
    >
    >
    >
    > The client, is a fairly new Dual Core Vista Machine and I was logging into
    > it just fine, until...A major Software program was installed, and certain
    > permissions were accessed (I do not know which ones). Then it blocked me. It
    > is locked or blocked. We can't seem to find the one thing we need to get it
    > back.
    >
    >
    >
    > The permissions pertained to multiple users ,using the same program on our
    > application Server. No one, including the MS Pro would have purposely shut
    > that port down.
    >
    >
    >
    > What I am looking at from my out of town side is: A BRICK
    >
    >
    >
    > It Says: Connectiveity to the Remote Computer could not be established.
    > Ensure that the remote computer is on and connected to the Small Business
    > Server network.
    >
    >
    >
    > It is ON!
    >
    >
    >
    > I'm toast. Ideas and direction, not only for me, but, our MS Pro. Any help?
    > I know our Pro should know the answer, but alas we are here.
    >
    >
    >
    > Thanks Mark
    >
      My System SpecsSystem Spec

  6.    20 Mar 2008 #6
    Mark Guest

    Re: Port 3389 blocked or locked , could use some help


    No, I can not telnet the port. it is acting as if it is not there.

    "Robert L. (MS-MVP)" wrote:

    > Can you telnet port 3389?
    >
    > --
    > Bob Lin, MS-MVP, MCSE & CNE
    > Networking, Internet, Routing, VPN Troubleshooting on
    > http://www.ChicagoTech.net
    > How to Setup Windows, Network, VPN & Remote Access on
    > http://www.HowToNetworking.com
    > "Mark" <Mark@xxxxxx> wrote in message
    > news:600A7712-18B5-470F-B294-4E29FC458B5A@xxxxxx

    > >I login remotely to 3 servers, and if I choose 5 clients. I have full
    > > administrator rights.
    > >
    > >
    > >
    > > Suddenly, I am not able to remote into Client 01( Windows Vista)
    > >
    > >
    > >
    > > Our MS Pro says someone or something has blocked or locked :3389 and he
    > > does
    > > not know how to either rebuild it or fix it.
    > >
    > >
    > >
    > > The client, is a fairly new Dual Core Vista Machine and I was logging into
    > > it just fine, until...A major Software program was installed, and certain
    > > permissions were accessed (I do not know which ones). Then it blocked me.
    > > It
    > > is locked or blocked. We can't seem to find the one thing we need to get
    > > it
    > > back.
    > >
    > >
    > >
    > > The permissions pertained to multiple users ,using the same program on our
    > > application Server. No one, including the MS Pro would have purposely shut
    > > that port down.
    > >
    > >
    > >
    > > What I am looking at from my out of town side is: A BRICK
    > >
    > >
    > >
    > > It Says: Connectiveity to the Remote Computer could not be established.
    > > Ensure that the remote computer is on and connected to the Small Business
    > > Server network.
    > >
    > >
    > >
    > > It is ON!
    > >
    > >
    > >
    > > I'm toast. Ideas and direction, not only for me, but, our MS Pro. Any
    > > help?
    > > I know our Pro should know the answer, but alas we are here.
    > >
    > >
    > >
    > > Thanks Mark
    > >
    >
    >
      My System SpecsSystem Spec

  7.    20 Mar 2008 #7
    Robert L. \(MS-MVP\) Guest

    Re: Port 3389 blocked or locked , could use some help


    Make sure firewall blocks the port.Or it could be a 3rd party software. For
    troubleshooting, start Vista with clean boot.

    Windows generalHow to run Windows OS with a clean boot · How to Run Windows
    Safe Mode with Networking · How to setup DHCP for IP Phone How to sort
    programs in Start ...
    http://www.howtonetworking.com/Windo...owsgeneral.htm


    --
    Bob Lin, MS-MVP, MCSE & CNE
    Networking, Internet, Routing, VPN Troubleshooting on
    http://www.ChicagoTech.net
    How to Setup Windows, Network, VPN & Remote Access on
    http://www.HowToNetworking.com
    "Mark" <Mark@xxxxxx> wrote in message
    news:CEF8DBAA-44BB-4A7F-B14B-0A92AF612689@xxxxxx

    > No, I can not telnet the port. it is acting as if it is not there.
    >
    > "Robert L. (MS-MVP)" wrote:
    >

    >> Can you telnet port 3389?
    >>
    >> --
    >> Bob Lin, MS-MVP, MCSE & CNE
    >> Networking, Internet, Routing, VPN Troubleshooting on
    >> http://www.ChicagoTech.net
    >> How to Setup Windows, Network, VPN & Remote Access on
    >> http://www.HowToNetworking.com
    >> "Mark" <Mark@xxxxxx> wrote in message
    >> news:600A7712-18B5-470F-B294-4E29FC458B5A@xxxxxx

    >> >I login remotely to 3 servers, and if I choose 5 clients. I have full
    >> > administrator rights.
    >> >
    >> >
    >> >
    >> > Suddenly, I am not able to remote into Client 01( Windows Vista)
    >> >
    >> >
    >> >
    >> > Our MS Pro says someone or something has blocked or locked :3389 and he
    >> > does
    >> > not know how to either rebuild it or fix it.
    >> >
    >> >
    >> >
    >> > The client, is a fairly new Dual Core Vista Machine and I was logging
    >> > into
    >> > it just fine, until...A major Software program was installed, and
    >> > certain
    >> > permissions were accessed (I do not know which ones). Then it blocked
    >> > me.
    >> > It
    >> > is locked or blocked. We can't seem to find the one thing we need to
    >> > get
    >> > it
    >> > back.
    >> >
    >> >
    >> >
    >> > The permissions pertained to multiple users ,using the same program on
    >> > our
    >> > application Server. No one, including the MS Pro would have purposely
    >> > shut
    >> > that port down.
    >> >
    >> >
    >> >
    >> > What I am looking at from my out of town side is: A BRICK
    >> >
    >> >
    >> >
    >> > It Says: Connectiveity to the Remote Computer could not be established.
    >> > Ensure that the remote computer is on and connected to the Small
    >> > Business
    >> > Server network.
    >> >
    >> >
    >> >
    >> > It is ON!
    >> >
    >> >
    >> >
    >> > I'm toast. Ideas and direction, not only for me, but, our MS Pro. Any
    >> > help?
    >> > I know our Pro should know the answer, but alas we are here.
    >> >
    >> >
    >> >
    >> > Thanks Mark
    >> >
    >>
    >>
      My System SpecsSystem Spec

Port 3389 blocked or locked , could use some help

Similar Threads
Thread Forum
ISP Blocked Port 25-SMTP Issue--HELP!
We have SBS2000 with Exchange 2000 Server -we had no email issues until our ISP, Verizon, started blocking port 25. We use a smart host- AuthSMTP...
SBS Server
Re: Terminal Services not working - Port 3389 not listening
mgorman@newsgroup@ THANK YOU SO MUCH for your resolution. I did a P2V in VMWARE on a Windows 2000 server which went fine. Performed anther P2V...
Server General
Error adding printer; blocked a bind to a local port; no firewall
I am trying to add a network printer to a vista machine. The printer is on a win64 server 2008 machine. I can sucessfully add the same printer to...
Vista print fax & scan
What does 'blocked' mean in Port Status
I've been using FolderShare for awhile, and it seems to be working OK. When I look at the Port Status page in the Settings, it shows four ports...
Live Folder Share
Port 10001 blocked in Public network mode
Whenever I select public mode to connect the windows firewall blocks my outgoing port 10001. I have created an outgoing and incoming rule for port...
Vista General
Blocked port 25
Installed Vista RC1 as a dual boot with XP - runs beautifully, except... I cannot send emails using Vista Mail. My ISP uses port 25 for SMTP and...
Vista General
Port 80 Already Used Or Blocked ?
Hye, a problem with vista and easyphp..almost nothing installed on vista. I try to launch Apache of Easy PHP and I have this error message : The...
Vista General

Our Sites
  • Ten Forums
  • Eight Forums
  • Seven Forums
  • Help Me Bake
  • Site Links
  • Contact Us
  • Privacy and Cookies
  • About Us
    Windows Vista Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

    Designer Media Ltd
    All times are GMT -5. The time now is 22:11.
    .