Vista - Adaptec U320 39320D -> Vista x64 BSOD

**1DMF** · 01-22-2009

Has anyone managed to get Vista x64 installed while having raid enabled.

I had a nightmare recently where my missus spilt tea over my PC, killed my Mobo / 8800GTX card and my Cellshock memory.

OK I now got a new P5Q WS Asus board (don't buy one by the way IDE & SCSI doesn't work together!)... anyways...

I got a new GTX260 OCX and about to get some PC2-9200 OCZ Reaper HPC memory...

All seamed fine, until I tried to install vista again, this time using Raid as I got a new 147GB SCSI drive so decided to raid my 2 x 37 GB drives with the OS.

I've got the latest drivers from Adaptec website and my SCSI card has the latest bios on it. Same problem as before, BSOD when trying to install SCSI Raid Drivers.

Does anyone have a solution to this problem?

Cheers,
1DMF.

**lordbob75** · 01-22-2009

What is the BSOD code? Should be something like 0x000000a0 or something or BCCode: 3b

~Lordbob

**1DMF** · 01-22-2009

ummm right now couldn't tell you, i'm at work , does it matter?

What different codes could it be and what would they mean?

Do you have a fix for a specific code or range of codes? that you could let me know so when I get home I can try it if the codes match?

**lordbob75** · 01-22-2009

There are at least a couple hundred error codes.......

Depending on the code, the error could be completely different things. Most common on these forums have been the 0x0000000D3 and 0x00000000A0 codes.

Yours could be different. Just post it when you get home.

~Lordbob

**1DMF** · 01-22-2009

It says "driver has overrun a stack based buffer" then the technical information is *** STOP: 0X000000F7 (0XFFFFF980018259E0, 0X00002B992DDFA232, 0XFFFFD466D2205DCD, 0X0000000000000000)

Does that help?

**lordbob75** · 01-22-2009

Yes it does indeed thank you. OK there are two possibilities of that code: One, you have a nasty virus. Two, bad driver. I will assume the second one since you were installing it when it happened. Though run some scans anyways just to check.

To fix this, uninstall the driver. I believe it to be caused by the SCSI driver. Can you use your system without that driver or hardware setup?
You may need to wait until completed drivers are released....

~Lordbob

**1DMF** · 01-23-2009

Obviously it's not a virus, the drive is new, has been low level and then NTFS formatted, and has nothing on it, this is a new install.

I contacted adaptec and here is their response...

Quote:

Hello from Adaptec-

Thank you for your message.

The most common issue is the driver utilized.

You will need to download the driver here;

Adaptec - Adaptec Driver: Ultra320 64-bit SCSI Drivers Ver. 7.0.0.6 for Windows Vista, Microsoft certified Download Detail

Your product is beyond support and out of hardware warranty.

These expired in 11/12/2004 and 11/12/2007 consecutively.

Support is available at an $80 charge per incident.

To Speak with an Adaptec Technical Support Specialist in North America

Normal business hours support 408-934-7274

Monday - Friday (except holidays) 9:00 AM - 6:00 PM U.S. Central Time

Thank you for using ASK US

Basically the drivers don't work as they supply a link to the non-hostraid drivers, what does that tell you.

The cheek to want $80.00 after i'd spent @ $1,000 on the card and HD, never again will I buy Adaptec, that's for sure!

**hondavtec93** · 01-23-2009

Yea my raid works fine on vista 64. but my geforce 7900 gt doesn't work.

**lordbob75** · 01-23-2009

Quote: Originally Posted by 1DMF

The cheek to want $80.00 after i'd spent @ $1,000 on the card and HD, never again will I buy Adaptec, that's for sure!

Exactly. It would be cheaper to buy a new HDD. I don't use RAID as the cards are a lot, and I'm not sure what the point of them is.

Anyways, good luck with whatever you decide to do.

~Lordbob

**lordbob75** · 01-23-2009

Quote: Originally Posted by hondavtec93

Yea my raid works fine on vista 64. but my geforce 7900 gt doesn't work.

Do you have all the drivers and such?

~Lordbob

01-22-2009	#1 (permalink)
1DMF 11 posts	Adaptec U320 39320D -> Vista x64 BSOD Has anyone managed to get Vista x64 installed while having raid enabled. I had a nightmare recently where my missus spilt tea over my PC, killed my Mobo / 8800GTX card and my Cellshock memory. OK I now got a new P5Q WS Asus board (don't buy one by the way IDE & SCSI doesn't work together!)... anyways... I got a new GTX260 OCX and about to get some PC2-9200 OCZ Reaper HPC memory... All seamed fine, until I tried to install vista again, this time using Raid as I got a new 147GB SCSI drive so decided to raid my 2 x 37 GB drives with the OS. I've got the latest drivers from Adaptec website and my SCSI card has the latest bios on it. Same problem as before, BSOD when trying to install SCSI Raid Drivers. Does anyone have a solution to this problem? Cheers, 1DMF.
My System Specs

01-22-2009	#2 (permalink)
lordbob75 Windows 7 x64 build 7100 & Ubuntu 9.04 1,672 posts	Re: Adaptec U320 39320D -> Vista x64 BSOD What is the BSOD code? Should be something like 0x000000a0 or something or BCCode: 3b ~Lordbob
My System Specs

01-22-2009	#3 (permalink)
1DMF 11 posts	Re: Adaptec U320 39320D -> Vista x64 BSOD ummm right now couldn't tell you, i'm at work , does it matter? What different codes could it be and what would they mean? Do you have a fix for a specific code or range of codes? that you could let me know so when I get home I can try it if the codes match?
My System Specs

01-22-2009	#4 (permalink)
lordbob75 Windows 7 x64 build 7100 & Ubuntu 9.04 1,672 posts	Re: Adaptec U320 39320D -> Vista x64 BSOD There are at least a couple hundred error codes....... Depending on the code, the error could be completely different things. Most common on these forums have been the 0x0000000D3 and 0x00000000A0 codes. Yours could be different. Just post it when you get home. ~Lordbob
My System Specs

01-22-2009	#5 (permalink)
1DMF 11 posts	Re: Adaptec U320 39320D -> Vista x64 BSOD It says "driver has overrun a stack based buffer" then the technical information is *** STOP: 0X000000F7 (0XFFFFF980018259E0, 0X00002B992DDFA232, 0XFFFFD466D2205DCD, 0X0000000000000000) Does that help?
My System Specs

01-22-2009	#6 (permalink)
lordbob75 Windows 7 x64 build 7100 & Ubuntu 9.04 1,672 posts	Re: Adaptec U320 39320D -> Vista x64 BSOD Yes it does indeed thank you. OK there are two possibilities of that code: One, you have a nasty virus. Two, bad driver. I will assume the second one since you were installing it when it happened. Though run some scans anyways just to check. To fix this, uninstall the driver. I believe it to be caused by the SCSI driver. Can you use your system without that driver or hardware setup? You may need to wait until completed drivers are released.... ~Lordbob
My System Specs

01-23-2009	#7 (permalink)
1DMF 11 posts	Re: Adaptec U320 39320D -> Vista x64 BSOD Obviously it's not a virus, the drive is new, has been low level and then NTFS formatted, and has nothing on it, this is a new install. I contacted adaptec and here is their response... Quote: Hello from Adaptec- Thank you for your message. The most common issue is the driver utilized. You will need to download the driver here; Adaptec - Adaptec Driver: Ultra320 64-bit SCSI Drivers Ver. 7.0.0.6 for Windows Vista, Microsoft certified Download Detail Your product is beyond support and out of hardware warranty. These expired in 11/12/2004 and 11/12/2007 consecutively. Support is available at an $80 charge per incident. To Speak with an Adaptec Technical Support Specialist in North America Normal business hours support 408-934-7274 Monday - Friday (except holidays) 9:00 AM - 6:00 PM U.S. Central Time Thank you for using ASK US Basically the drivers don't work as they supply a link to the non-hostraid drivers, what does that tell you. The cheek to want $80.00 after i'd spent @ $1,000 on the card and HD, never again will I buy Adaptec, that's for sure!
My System Specs

01-23-2009	#8 (permalink)
hondavtec93 Vista Home Premium 32-bit. 11 posts	Re: Adaptec U320 39320D -> Vista x64 BSOD Yea my raid works fine on vista 64. but my geforce 7900 gt doesn't work.
My System Specs

01-23-2009	#9 (permalink)
lordbob75 Windows 7 x64 build 7100 & Ubuntu 9.04 1,672 posts	Re: Adaptec U320 39320D -> Vista x64 BSOD Quote: Originally Posted by 1DMF The cheek to want $80.00 after i'd spent @ $1,000 on the card and HD, never again will I buy Adaptec, that's for sure! Exactly. It would be cheaper to buy a new HDD. I don't use RAID as the cards are a lot, and I'm not sure what the point of them is. Anyways, good luck with whatever you decide to do. ~Lordbob
My System Specs

01-23-2009	#10 (permalink)
lordbob75 Windows 7 x64 build 7100 & Ubuntu 9.04 1,672 posts	Re: Adaptec U320 39320D -> Vista x64 BSOD Quote: Originally Posted by hondavtec93 Yea my raid works fine on vista 64. but my geforce 7900 gt doesn't work. Do you have all the drivers and such? ~Lordbob
My System Specs

Similar Threads
Thread	Forum
Adaptec U320 39320A-R Vista x64 BSOD	Drivers
Adaptec U320 39320D-R SCSI + Vista x64 Business will not work!	Drivers
VistaX64 BSOD: 0x000000F7 Adapted U320 HostRaid Enabled	Drivers
Anyone know of a SCSI U320 adapter that has Vista 64 support?	Drivers
U320 SCSI Drivers / Support for Vista	Vista General