Vista - Vista 64 Raid5

Hi all, hope somebody can help, I need help!
Just built new pc, loaded vista 64 home basic, works well in sata ide mode.
I have three 1.5tb seagate hdds & want to run them on raid 5. Bios set on ide mode all sata drives can be seen, reset to raid they disapear in bios? On start up (in raid mode) shows healthy raid 5 at 2.72tb, load vista from dvd, gets to load drivers & it will not find any. If I browse disc I can see the file, select it & it does not find it, says no drive found???? No advanced option availabe.
If that makes any sense to anybody, please help.

Asus M3N HT-Deluxe Motherboard
AMD Phenom x4 9650 2.3Ghz cpu
Ocz 4Gb

Phill.

Hi Phill,

Welcome to the forum,

It is normal that RAID discs do not show up in the BIOS

When you install Vista you have to load the RAID drivers form the motherboard CD

This is all explained in the motherboard handbook.

If you need to download the drivers or hand book have a look here;
ASUSTeK Computer Inc.-Support-

You have to give in your motherboard details to go to the download page.

I hope this helps

Pooch

Pooch, thanks very much for the reply. I have all the drivers both off the mother board dvd & I downloaded them off the asus web site. Vista just will not find them or use them, more likely I'm just to thick to do it correctly!!

Vista will only take the right drivers

on the cd open the folder drivers, open chipset, open raid driver, open folder Vista open folder vista x64 you need the .inf file eg. ahcix64s.inf

Just been looking through the asus site as you have nvidia drivers there is probably a nvidia folder when you are looking through the chipset folders,
The driver remains an .inf data