Vista - Microtek i900 Driver

I'm trying to find a driver to run a Microtek i900 scanner on Vista 64 bit. I was directed to this site. I could not find the suggested drivers at Microtek's site. Anyone have experence with this?

Hello jjonsalt,
Microtek have released a driver that will work on XP/Vista 32/64 bit systems, (cant guarantee this of course), i have included the link to these drivers.
Hope this helps, and please post your results.
Good luck.

Microtek has released x64 scanner drivers - PlanetAMD64

I have had a look at the microtek site.
These drivers are 32 bit.
You can try a similar product or email microtek to ask them.

I was having a difficult time looking for a driver for my i900 and a 64 bit Vista OS. The following email may help someone. I would rather use firewire than USB but can't find where to download hotfix : 922498.

Dear customer,
I am David Lee, the technical support of Microtek in Taiwan.
ScanWizard Pro V7.12 is the latest version of scanner driver S/W that can support ScanMaker i900 to work under PC Windows Vista ( 64 bit & 32 bit ) / XP ( 32 bit ) / 2000 system through USB2.0 connectivity.
If you want to keep your ScanMaker i900 work under Windows Vista 64 bit system through FireWire connectivity, by this way, you shall download hotfix : 922498 from Microsoft, and then install this hot fix into Windows Vista 64 bit system, after that, ScanWizard Pro V7.12 can support ScanMaker i900 to work under Windows Vista 64 bit system through FireWire connectivity.

If you need ScanWizard Pro V7.12, you can link to Microtek URL at http://ww3.microtek.com.tw/eu/module...index.php?id=2 ( select OS : Windows Vista at first, next, select Product : ScanMaker i900, after that, click " Go! ". ), and then download scanner driver S/W : ScanWizard Pro V7.12 and its optional fil e! s : and its optional files : SWPHelp V1.031, Microtek Scanner ICC Profiler V3.10 and IT8 Installer V3.14 from there.

When you do S/W installation or S/W un-installation under PC Windows system, the scanner can not link with PC computer via USB / FireWire cable connection, or the scanner driver installation or scanner driver un-installation under PC Windows system will be affected. Please watch this point well, thanks.

Please refer to the following instructions, and then install Microtek scanner driver S/W : ScanWizard Pro V7.12 and its optional files into PC Windows system.
1. Make sure USB / FireWire cable not link with scanner at first, and then power off your scanner.

2. Remove old version of Microtek scanner driver S/W from your PC Windows system.

3. Download new version of scanner S/W : ScanWizard Pro V7.12 from Microtek website at http://ww3.microtek.com.tw/eu/module...index.php?id=2, after that, install this scanner driver S/W into your PC Windows system.

4. Download Help file : SWPHelp V1.031 from Microtek website at http://ww3.microtek.com.tw/eu/module...index.php?id=2, after that, install this file into your PC Windows system.

5. Download utility : Microtek Scanner ICC Profiler V3.10 from Microtek website at http://ww3.microtek.com.tw/eu/module...index.php?id=2, after that, install this utility into your PC Windows system.

6. Download the file of IT8 target : IT8 Installer V3.14 from Microtek website at http://ww3.microtek.com.tw/eu/module...index.php?id=2, after that, install this file into your PC Windows system.

7. Restart your PC Windows system again.

8. Power up your ScanMaker i900, and then make an USB or FireWire cable connection between PC and your Microtek scanner.

Finally, thank you for purchasing a Microtek product.
Best regards,
David Lee
Technical Support Center / MII
Microtek International Inc.
Tel : 886-3-5772155, ext : 192
Fax : 886-3-5772598, ext : 192

Hotfix is here;
FIX: Error message when you use an IEEE 1394-based scanner on a computer that is running Windows XP 64-bit, Windows Server 2003, or Windows Vista: 0x0000000A or 0x000000BE

Thanks, but been there. I have emailed twice with no response. Was hoping to find a direct link to a download.