Problem with hp recovery for vista

T

tracer555

Member
Please help I have been trying to use the system recovery for 3 days now and it seems to work fine until it hits windows set up it finishes the Pre-PININST then restarts and all I get is a Blue/black screen and it seems to stall there, I left it overnight and still have same screen
 

My Computer

System One

  • Manufacturer/Model
    HP G60
    Graphics Card(s)
    NVIDIA
    Hard Drives
    AMD Athon x2

My Computer

System One

  • Manufacturer/Model
    a6530f Desktop
    CPU
    HP-PAVILION
    Motherboard
    M2N68-LA (Narra3)
    Memory
    8 Gigs of Ram/DDR2 PC2-6400 MB/sec
    Graphics Card(s)
    NVIDIA GeForce 6150SE nForce 430
    Sound Card
    Intergrated Realtex ALC888S Audio
    Monitor(s) Displays
    LG W40 series widescreen
    Screen Resolution
    1600 X 900
    Hard Drives
    1 640 GB Sata transfer rating: 3.0 Gb/sec speed: 7200 RPM
    PSU
    300W
    Case
    Mid-Size ATX
    Keyboard
    HP Multimedia Keyboard
    Mouse
    Microsoft Wireless Mouse 5000
    Other Info
    Processor: AMD Phenom X3 8450 Operating speed: Up to 2.1 GHz, Number of cores: 3, Socket: AM2+, Bus speed: 3600 MHz HT3 (clocked down to 2000 MHz)

    Modem: 56K WinModem/

    Supermulti: 16X DVD(+/-)R/RW 12X Ram (+/-)R DL Lightscribe SATA Drive

    Menory Card Reader: 15-in-1 Multimedia Card Reader

    Media Drive
Hello and thank you for reponding so quickly.....I just did a quick review on the links that you sent me but not sure if they will work I'd just like to clarify a few things to give you a better picture. First off my computer would not start up in windows I took it to a shop and they wanted $350 to fix it. I did some research and came up with the hp recovery for vista......I looked at some things in the safe mode but could not figure much out so i decied to go ahead with the recovery. I used f11 to start the recovery manager and went on from there all was going good until the windows setup window came up it had a check mark at the pre-pininst and did its thing then restarted when it came back on all I got was a blank screen and it has stalled there. I have tried to redo it a few times now but stops at the same point. I cannot start again in safe mode because I get a popup window saying Windows cannot complete installation in safe mode. To continue installing windows restart the computer after doing so it returns to a dark screen and stays there.
 

My Computer

System One

  • Manufacturer/Model
    HP G60
    Graphics Card(s)
    NVIDIA
    Hard Drives
    AMD Athon x2
Hello

I am sorry that it was unhelpful, I am going to requset a few more members to take a look and they will have some more suggestions for, so give it a few more minutes and then will answer.
 

My Computer

System One

  • Manufacturer/Model
    a6530f Desktop
    CPU
    HP-PAVILION
    Motherboard
    M2N68-LA (Narra3)
    Memory
    8 Gigs of Ram/DDR2 PC2-6400 MB/sec
    Graphics Card(s)
    NVIDIA GeForce 6150SE nForce 430
    Sound Card
    Intergrated Realtex ALC888S Audio
    Monitor(s) Displays
    LG W40 series widescreen
    Screen Resolution
    1600 X 900
    Hard Drives
    1 640 GB Sata transfer rating: 3.0 Gb/sec speed: 7200 RPM
    PSU
    300W
    Case
    Mid-Size ATX
    Keyboard
    HP Multimedia Keyboard
    Mouse
    Microsoft Wireless Mouse 5000
    Other Info
    Processor: AMD Phenom X3 8450 Operating speed: Up to 2.1 GHz, Number of cores: 3, Socket: AM2+, Bus speed: 3600 MHz HT3 (clocked down to 2000 MHz)

    Modem: 56K WinModem/

    Supermulti: 16X DVD(+/-)R/RW 12X Ram (+/-)R DL Lightscribe SATA Drive

    Menory Card Reader: 15-in-1 Multimedia Card Reader

    Media Drive
Hi,

First a few questions: -

Do you need to recover or save any files on the system or are they already lost?

If not or they are lost, please try a destrucive install i.e. Delete the "C" partition & format it. Then select this space as the recovery selection. DO NOT DELETED ANY OTHER PART OF THE SYSTEM.

If you have ANY questions ask BEFORE acting. OK?
 

My Computer

System One

  • Manufacturer/Model
    HP-Pavilion m9280.uk-a
    CPU
    2.30 gigahertz AMD Phenom 9600 Quad-Core
    Motherboard
    ASUSTek Computer INC. NARRA3 3.02
    Memory
    3582 Megabytes Usable Installed Memory (4 Gig)
    Graphics Card(s)
    ASUS NVIDIA Geforce GTS450
    Sound Card
    Realtek High Definition 7.1 Audio (HP drivers)
    Monitor(s) Displays
    HP w2408 24.0" (Dual monitor)
    Screen Resolution
    1920 * 1200, 1920 * 1200
    Hard Drives
    3*500 Gigabytes Usable Hard Drive Capacity
    Plus 2x USB (160Gig each) external HDD
    BluRay & DVD Weiters
    HL-DT-ST BD-RE GGW-H20L SCSI CdRom (Bluray RW) Device
    AlViDrv BDDVDROM SCSI CdRom (Blueray) Device
    TSSTcorp CDDVDW TS-H653N SCSI CdRom
    Internet Speed
    40 Meg
Hi, I did not save anything when doing the hp recovery I just wanted it to start back up in the original form from the factory. And how do I do what u suggested? I have left the laptop on all day where it had stalled I am using my desktop now.
 

My Computer

System One

  • Manufacturer/Model
    HP G60
    Graphics Card(s)
    NVIDIA
    Hard Drives
    AMD Athon x2
tracer555 said:
Hi, I did not save anything when doing the hp recovery I just wanted it to start back up in the original form from the factory. And how do I do what u suggested? I have left the laptop on all day where it had stalled I am using my desktop now.
Click to expand...


>>> I just wanted it to start back up in the original form from the factory.

Suggestions :

1. Call your HP manufacturer. Ask for a tech to show you how to use the recovery partition. They created the parition. They know perfectly how to use it.

2. Ask HP for a set of recovery disks. The cost is minimal. Use the set to do system recover.
How to Restore an HP computer to Factory Settings :

How to Restore an HP Computer to Factory Settings | eHow.com
 

My Computer

System One

Thank you all for all your help. Late last night I finally got my sytem restore completed so all is good there now I have a problem with a flickering screen any ideas there?????
 

My Computer

System One

  • Manufacturer/Model
    HP G60
    Graphics Card(s)
    NVIDIA
    Hard Drives
    AMD Athon x2
tracer555 said:
Thank you all for all your help. Late last night I finally got my sytem restore completed so all is good there now I have a problem with a flickering screen any ideas there?????
Click to expand...

Again, go to your HP website, look for graphic card driver update.
You may need an update.
 

My Computer

System One

You must log in or register to reply here.
Back
Top