Vista - BSOD page fault in none paged area

timjcur · 07-22-2008

Hello
hope someone can be of help

I have an acer aspire 5315 laptop which will not boot into vista basic. while loading windows it freezes with the message

*** stop "page_fault_in_nonpaged_area" 0x00000050
(0x892f000, 0x00000000, 0x810360a3, 0x00000000)

If I try safe mode or last known good configuration it always freezes at the same point. I tried the recovery option, but it still freezes. As a last resort I tried to boot from the Vista dvd but it still gives me the bsod.

thanks

timjcur

**ripbox** · 07-22-2008

be sure to remove any expansion cards and usb devices and try booting again

**johngalt** · 07-22-2008

At this point you might suspect some sort of hardware failure. First and foremost, like Rip said, remove extraneous hardware cards and all but a single stick of RAM and try booting off the DVD - if it still goes goofunky, then download Memtest86 iso and burn it to a CD (obviously on a different computer since this one will not boot) and test your RAM...if it *still* hangs then you may have a failing motherboard or else a CPU Heatsink issue.

07-22-2008	#1 (permalink)
timjcur 32bit 1 posts	BSOD page fault in none paged area Hello hope someone can be of help I have an acer aspire 5315 laptop which will not boot into vista basic. while loading windows it freezes with the message *** stop "page_fault_in_nonpaged_area" 0x00000050 (0x892f000, 0x00000000, 0x810360a3, 0x00000000) If I try safe mode or last known good configuration it always freezes at the same point. I tried the recovery option, but it still freezes. As a last resort I tried to boot from the Vista dvd but it still gives me the bsod. thanks timjcur
My System Specs

07-22-2008	#2 (permalink)
ripbox vista ultamate 64bit 505 posts	Re: BSOD page fault in none paged area be sure to remove any expansion cards and usb devices and try booting again
My System Specs

07-22-2008	#3 (permalink)
johngalt Vista Ultimate x64 MAK, OpenSolaris 5, Gentoo 2008.1.... 3,848 posts	Re: BSOD page fault in none paged area At this point you might suspect some sort of hardware failure. First and foremost, like Rip said, remove extraneous hardware cards and all but a single stick of RAM and try booting off the DVD - if it still goes goofunky, then download Memtest86 iso and burn it to a CD (obviously on a different computer since this one will not boot) and test your RAM...if it still hangs then you may have a failing motherboard or else a CPU Heatsink issue.
My System Specs

Similar Threads
Thread	Forum
BSOD Page Fault in Non-paged area	General Discussion
Urgent Help: Page Fault in Non Paged Area	General Discussion
Vista Ultimate 64 BSOD 0x00000050 PAGED FAULT IN NON PAGED AREA	Vista hardware & devices
Re: Vista Ultimate 64 BSOD 0x00000050 PAGED FAULT IN NON PAGED AREA	Vista General
page fault in non paged area	Vista General