Vista Tutorial - Vista install wont boot

mzmiric5 · 08-09-2008

I have just bought an upgrade for my pc.
My new configuration is:
Intel Core 2 Quad Q9450
8GB(4x2GB) SuperTalent 800MHz DDR2
XFX 9800GTX
Asus P5B
Segate 500GB HDD with 32MB cache

now when i try to install Vista Ultimate x64, i select to boot from dvd, i select windows setup, and then i get the msg that there is no ntoskrnl on the system.
when i try to install my vista ghost img from my old pc, i menage to install it, and get it up and running but when i try to install some software that tries to extract files from cab files or when i use winzip to extract files i get crc errors.

I have tested the HDD and RAM using Segate SeaTools and MemTest86+

Now i have tried and managed to install XP x64 edition without any problems.

Any help is apriceated.

Thanks in advance

Miso

EDIT: ok same thing with xp, when i try to extract or install some software that has some compressed files as sources for install and i get the same crc error as on vista img install

**CreepinJesus** · 08-09-2008

Can you install the 32-bit version without problems ?

mzmiric5 · 08-09-2008

i get same error

**CreepinJesus** · 08-09-2008

These may help:

How to automatically repair Windows Vista using Startup Repair

How to use the Command Prompt in the Vista Windows Recovery Environment

**roy69** · 08-09-2008

CRC errors normally are caused by bad media. This would be the DVD in most cases.
Try a different DVD to see if this solves the problem, you can use the key for the version you have purchased.
As you have installed XP you know it is not your drive.
Try reading the Vista disk from within XP.
You can look in your error log to see if there are any others problems that may be contributing to this.

**Bare Foot Kid** · 08-09-2008

Hello all.

We have these well written, easy to follow tutorials here at Vista forums.
Please take the time to have a look at them!

Startup Repair

Command Prompt Window Here

and

Command Prompt

Later

Ted

mzmiric5 · 08-09-2008

it's all fine, there were some trouble with the memory modules, after changing them it's all fine now, it seams that the bad memory module was creating bad sectors and could not cache the files properly. Thanks for help anyways

**Bare Foot Kid** · 08-09-2008

Hello mzmiric5.

Glad to see you got it all sorted!

Later

Ted

08-09-2008	#1 (permalink)
mzmiric5 Newbie Join Date: Jan 2008 Vista Ultimate x64 3 posts	Vista install wont boot I have just bought an upgrade for my pc. My new configuration is: Intel Core 2 Quad Q9450 8GB(4x2GB) SuperTalent 800MHz DDR2 XFX 9800GTX Asus P5B Segate 500GB HDD with 32MB cache now when i try to install Vista Ultimate x64, i select to boot from dvd, i select windows setup, and then i get the msg that there is no ntoskrnl on the system. when i try to install my vista ghost img from my old pc, i menage to install it, and get it up and running but when i try to install some software that tries to extract files from cab files or when i use winzip to extract files i get crc errors. I have tested the HDD and RAM using Segate SeaTools and MemTest86+ Now i have tried and managed to install XP x64 edition without any problems. Any help is apriceated. Thanks in advance Miso EDIT: ok same thing with xp, when i try to extract or install some software that has some compressed files as sources for install and i get the same crc error as on vista img install Last edited by mzmiric5; 08-09-2008 at 07:31 AM..
My System Specs

08-09-2008	#2 (permalink)
CreepinJesus Senior Member Join Date: Jul 2008 Vista Ultimate x64 151 posts	Re: Vista install wont boot Can you install the 32-bit version without problems ?
My System Specs

08-09-2008	#3 (permalink)
mzmiric5 Newbie Join Date: Jan 2008 Vista Ultimate x64 3 posts	Re: Vista install wont boot i get same error
My System Specs

08-09-2008	#4 (permalink)
CreepinJesus Senior Member Join Date: Jul 2008 Vista Ultimate x64 151 posts	Re: Vista install wont boot These may help: How to automatically repair Windows Vista using Startup Repair How to use the Command Prompt in the Vista Windows Recovery Environment
My System Specs

08-09-2008	#5 (permalink)
roy69 47,65,65,6B Join Date: Nov 2007 Vista home premium 64 bit 2,076 posts	Re: Vista install wont boot CRC errors normally are caused by bad media. This would be the DVD in most cases. Try a different DVD to see if this solves the problem, you can use the key for the version you have purchased. As you have installed XP you know it is not your drive. Try reading the Vista disk from within XP. You can look in your error log to see if there are any others problems that may be contributing to this.
My System Specs

08-09-2008	#6 (permalink)
Bare Foot Kid Technophile Wannabe Join Date: Feb 2008 Vista 64-bit Ultimate Win7 64-bit Ultimate XP SP3 32-bit Pro 2,126 posts	Re: Vista install wont boot Hello all. We have these well written, easy to follow tutorials here at Vista forums. Please take the time to have a look at them! Startup Repair Command Prompt Window Here and Command Prompt Later Ted
My System Specs

08-09-2008	#7 (permalink)
mzmiric5 Newbie Join Date: Jan 2008 Vista Ultimate x64 3 posts	Re: Vista install wont boot it's all fine, there were some trouble with the memory modules, after changing them it's all fine now, it seams that the bad memory module was creating bad sectors and could not cache the files properly. Thanks for help anyways
My System Specs

08-09-2008	#8 (permalink)
Bare Foot Kid Technophile Wannabe Join Date: Feb 2008 Vista 64-bit Ultimate Win7 64-bit Ultimate XP SP3 32-bit Pro 2,126 posts	Re: Vista install wont boot Hello mzmiric5. Glad to see you got it all sorted! Later Ted
My System Specs

Similar Threads
Thread	Forum
Computer wont boot after re-install	General Discussion
RE: Remote control applet wont install or even prompt to install-vista	Virtual Server
Bad BCD, now it wont boot to install CD for repair?	General Discussion
Vista wont boot after install, DVD is not bootable eigher..PLESE H	Vista installation & setup
XP Wont Boot With Vista	Vista installation & setup