almost everythings has stopped working

U

uknownerror

New Member
I have had my new computer for about three months and around three weeks ago I did a system restore due to some system errors.After everything was fine for about a week but the slowly more error messages have begun to pop up.I tried to do another system restore but shadow copy service doesn't work.Control panel will not appear when I click on it and event view initializes but suddenly dissapears.core cell center doesn't work and windows installer isn't working either.most of my games don't work and the ones that do work for 15 minutes then I get an error message.I've run several virus scans and nothing appears but two days ago avg scanner has stopped working also.I've searched the forums and have found little help any suggestions?

sfc was one of the first things I tried and I tried to reinstall vista but I get a message that says an error occured.To reinstall do I need to reformat the drive because Ive tried installing while running vista to try and fix the problems(without reformat.
 
Last edited:

My Computer

System One

  • Manufacturer/Model
    custom
    CPU
    pentium duo 2.66 mgz 1333 fsb
    Motherboard
    msi p35 neo-f
    Memory
    3 gb ddr 2 667mhz
    Graphics Card(s)
    nvidia 9800 gt
    Hard Drives
    640 gb sata2 7200rpm
    Keyboard
    logitech g11
    Mouse
    dell
Hello uknownerror, and welcome to Vista Forums.

At this point, I would say a clean reinstall of Vista would probably be best to resolve this. :(

Sorry,
Shawn
 

My Computers

System One System Two

  • Operating System
    Windows 10 Pro 64-bit
    Manufacturer/Model
    Custom
    CPU
    Intel i7-8700K 5 GHz
    Motherboard
    ASUS ROG Maximus XI Formula Z390
    Memory
    64 GB (4x16GB) G.SKILL TridentZ RGB DDR4 3600 MHz (F4-3600C18D-32GTZR)
    Graphics Card(s)
    ASUS ROG-STRIX-GTX1080TI-O11G-GAMING
    Sound Card
    Integrated Digital Audio (S/PDIF)
    Monitor(s) Displays
    2 x Samsung Odyssey G7 27"
    Screen Resolution
    2560x1440
    Hard Drives
    1TB Samsung 990 PRO M.2,
    4TB Samsung 990 PRO PRO M.2,
    8TB WD MyCloudEX2Ultra NAS
    PSU
    Seasonic Prime Titanium 850W
    Case
    Thermaltake Core P3
    Cooling
    Corsair Hydro H115i
    Keyboard
    Logitech wireless K800
    Mouse
    Logitech MX Master 3
    Internet Speed
    1 Gb/s Download and 35 Mb/s Upload
    Other Info
    Logitech Z625 speaker system,
    Logitech BRIO 4K Pro webcam,
    HP Color LaserJet Pro MFP M477fdn,
    APC SMART-UPS RT 1000 XL - SURT1000XLI,
    Galaxy S23 Plus phone
  • Operating System
    Windows 10 Pro
    Manufacturer/Model
    HP Envy Y0F94AV
    CPU
    i7-7500U @ 2.70 GHz
    Memory
    16 GB DDR4-2133
    Graphics card(s)
    NVIDIA GeForce 940MX
    Sound Card
    Conexant ISST Audio
    Monitor(s) Displays
    17.3" UHD IPS touch
    Screen Resolution
    3480 x 2160
    Hard Drives
    512 GB M.2 SSD
hi UE,

As Shawn suggested a reinstallation might be the easiest way to go. It sounds as if your installation might be a bit too far gone for repair.

Having said that, have you tried using your Vista disk to perform a repair?

Run SFC /SCANNOW at the command prompt as administrator?

It's unlikely that it will help, but at this stage it can't hurt to try.

Back up what you can while you can ;)
 

My Computer

System One

  • Manufacturer/Model
    Self Built
    CPU
    i7 3770K HT ON 4.7GHz
    Motherboard
    P8Z68 Deluxe Gen 3
    Memory
    8GB G.Skill Ripjaws X 2133mhz
    Graphics Card(s)
    2x Gigabyte GTX 670 OC WindForce SLI
    Sound Card
    X-FI Forte + ATH-AD900
    Monitor(s) Displays
    x2 Dell U2410 / 58" Samsung / "40 Sony
    Screen Resolution
    1920*1200 / 1920x1080
    Hard Drives
    2x Intel 520 240GB * Crucial M4 128GB * 2x Samsung F3 1TB (RAID 0) * 2x WD Caviar Blacks 2TB (RAID 0)
    PSU
    Corsair AX1200W
    Case
    Lian Li PC-V1020A
    Cooling
    NH-D14: 3x140mm Gelid Wing 14: Sunbeam Rheobus Extreme
    Keyboard
    Topre Realforce // Ducky Shine Cherry MX Black
    Mouse
    Razer Imperator + Thermaltake Theron
    Other Info
    Laptop Specs:
    Clevo Sager P170HM //
    17.3 Matte 1920x1200 //
    i7 2720QM // 8GB 1333mhz //
    Dedicated GTX 485M //
    240GB Intel 520 + 750GB + Blu-Ray //

    Samsung Story 2TB USB 3.0
help needed desperate!!

when i reboot after about 20 sec I get a black screen (it doens't fully boot up) and a message
windows host process(rundll32) has stopped working
a problem caused the program to stop working correctly.windows will close the program...

nothing happens even after I press the close program option and all I get is the black screen same thing happens in safe mode.And if Im supposed to reinstall how do I because nothing happens when I insert the vista disc:mad:

I am not to savy but what do I do?!?!

safe mode is the same reult just a black screen
 
Last edited:

My Computer

System One

  • Manufacturer/Model
    custom
    CPU
    pentium duo 2.66 mgz 1333 fsb
    Motherboard
    msi p35 neo-f
    Memory
    3 gb ddr 2 667mhz
    Graphics Card(s)
    nvidia 9800 gt
    Hard Drives
    640 gb sata2 7200rpm
    Keyboard
    logitech g11
    Mouse
    dell
Re: help needed desperate!!

Som non-system application & services cause this

1.Run computer in safe mode-in safe mode you shouldn't have trouble
2.Navigate to Event Viewer (Start>>Search>>eventvwr.msc)
and go to Application and System section and find errors messages which concern rundll32.exe,check also Problem reports and Solutuions in Control Panel
3. You can also try How to perform a clean boot procedure to determine whether background programs are interfering with a game or a program that you currently use
 

My Computer

System One

memory reading problems

the instruction at 0xfe86e4f8 referenced memory at 0x00000036.the memory could not be read

I get this message everytime I boot includind safe mode and after I terminate the screen turns black so I can't even reach the desk top.I don;t know what to do any advice?Running on vista 64 sp1
 

My Computer

System One

  • Manufacturer/Model
    custom
    CPU
    pentium duo 2.66 mgz 1333 fsb
    Motherboard
    msi p35 neo-f
    Memory
    3 gb ddr 2 667mhz
    Graphics Card(s)
    nvidia 9800 gt
    Hard Drives
    640 gb sata2 7200rpm
    Keyboard
    logitech g11
    Mouse
    dell
You must log in or register to reply here.
Back
Top