Installation issue with Load Driver and USB

S

snowshine

New Member
Hi
Sorry to trouble you.
I have the Dell's Vista Express Upgrade DVD disk.
It works ok.
However I wish to do another clean install of the os.
When I choose the "custom [advanced] install" and format the partition works ok.
But when I try at this juncture to slip stream selecting the "Load Driver" my USB with the intel chipset & Intel's MSM drivers on my USB connected to the computer fails to show up!! Why?
Mine is a Dell computer with P965 chipset.
Thanking you.
 

My Computer

System One

  • Manufacturer/Model
    Dell XPS/Dimension 410/9200
    CPU
    ViiV Dual Core E6400 [2.13Ghz, 1066Mhz]
    Memory
    4GB. Dual Channel 4 x 1024 800MHz DDR2
    Graphics Card(s)
    Nvidia GeForce 7950 1GB
    Monitor(s) Displays
    UK/Irish flat panel 2007FP 20" Ultrasharp [DVI-D] Black Hight Ajustable
    Hard Drives
    640GB [2 X 320GB] SATA Stripe RAID 0
    Keyboard
    Keyboard&Mouse Dell Wireless Bluetooth & Optical Mouse
    Internet Speed
    8MB/sec
Try finishing the installation first, then go in and install the drivers. Thats what i usually do, and it works fine. It could be that by that time vista has not gotten the USB working, so will not sense it. I dont know for sure though.

~Lordbob
 

My Computer

System One

  • Manufacturer/Model
    Custom
    CPU
    Intel Core 2 Quad Q8200 2.33GHz
    Motherboard
    ASUS P5QC
    Memory
    2x2GB
    Graphics Card(s)
    NVidia GeForce 9500GT 1Gb
    Sound Card
    Mobo
    Monitor(s) Displays
    Samsung SyncMaster 206bw
    Screen Resolution
    1680x1050
    Hard Drives
    Samsung SP2514N ATA 250Gb 7200RPM
    Samsung [Model] 1Tb 7200RPM SATA2
    PSU
    Cooler Master Real Power Pro 750W
    Keyboard
    Razer Tarantula
    Mouse
    Razer Lachesis
    Internet Speed
    not fast enough
lordbob75 said:
Try finishing the installation first, then go in and install the drivers. Thats what i usually do, and it works fine. It could be that by that time vista has not gotten the USB working, so will not sense it. I dont know for sure though.

~Lordbob
Click to expand...

Yes,I have done it as you've said and it works.That is how I did it last time round.

However, this time round I wish for this slip-streaming of the Chipset & IMSM drivers. My attempt to slip stream through USB or a CD has not shown the drivers. However when I am at the point where "Load Drivers" it does show the USB & CD!! as available but fail to show the available drivers there!!
[I have two DVD Reader & DVD +/-RW]
 

My Computer

System One

  • Manufacturer/Model
    Dell XPS/Dimension 410/9200
    CPU
    ViiV Dual Core E6400 [2.13Ghz, 1066Mhz]
    Memory
    4GB. Dual Channel 4 x 1024 800MHz DDR2
    Graphics Card(s)
    Nvidia GeForce 7950 1GB
    Monitor(s) Displays
    UK/Irish flat panel 2007FP 20" Ultrasharp [DVI-D] Black Hight Ajustable
    Hard Drives
    640GB [2 X 320GB] SATA Stripe RAID 0
    Keyboard
    Keyboard&Mouse Dell Wireless Bluetooth & Optical Mouse
    Internet Speed
    8MB/sec
Then try putting the drivers on another DVD or CD and put it in your second drive and select from there. Obviously it is not reading from the USB port, so try that.

~Lordbob
 

My Computer

System One

  • Manufacturer/Model
    Custom
    CPU
    Intel Core 2 Quad Q8200 2.33GHz
    Motherboard
    ASUS P5QC
    Memory
    2x2GB
    Graphics Card(s)
    NVidia GeForce 9500GT 1Gb
    Sound Card
    Mobo
    Monitor(s) Displays
    Samsung SyncMaster 206bw
    Screen Resolution
    1680x1050
    Hard Drives
    Samsung SP2514N ATA 250Gb 7200RPM
    Samsung [Model] 1Tb 7200RPM SATA2
    PSU
    Cooler Master Real Power Pro 750W
    Keyboard
    Razer Tarantula
    Mouse
    Razer Lachesis
    Internet Speed
    not fast enough
Unless you actually create a DVD with the drivers slip-streamed in, the only drivers that you can load during the installation procedure are for the storage sub-system if this is not recognised by the included drivers on the Vista disk. All other drivers need to be installed after Vista has fully installed. If using an upgrade version of Vista, you will only need the storage driver for the 1st install, but you should wait until after the 2nd upgrade install before you install the other drivers.
 

My Computer

System One

  • Manufacturer/Model
    Dwarf Dwf/11/2012 r09/2013
    CPU
    Intel Core-i5-3570K 4-core @ 3.4GHz (Ivy Bridge) (OC 4.2GHz)
    Motherboard
    ASRock Z77 Extreme4-M
    Memory
    4 x 4GB DDR3-1600 Corsair Vengeance CMZ8GX3M2A1600C9B (16GB)
    Graphics Card(s)
    MSI GeForce GTX770 Gaming OC 2GB
    Sound Card
    Realtek High Definition on board solution (ALC 898)
    Monitor(s) Displays
    ViewSonic VA1912w Widescreen
    Screen Resolution
    1440x900
    Hard Drives
    OCZ Agility 3 120GB SATA III x2 (RAID 0)
    Samsung HD501LJ 500GB SATA II x2
    Hitachi HDS721010CLA332 1TB SATA II
    Iomega 1.5TB Ext USB 2.0
    WD 2.0TB Ext USB 3.0
    PSU
    XFX Pro Series 850W Semi-Modular
    Case
    Gigabyte IF233
    Cooling
    1 x 120mm Front Inlet 1 x 120mm Rear Exhaust
    Keyboard
    Microsoft Comfort Curve Keyboard 3000 (USB)
    Mouse
    Microsoft Comfort Mouse 3000 for Business (USB)
    Internet Speed
    NetGear DG834Gv3 ADSL Modem/Router (Ethernet) ~4.0 Mb/s (O2)
    Other Info
    Optical Drive: HL-DT-ST BD-RE BH10LS30 SATA Bluray
    Lexmark S305 Printer/Scanner/Copier (USB)
    WEI Score: 8.1/8.1/8.5/8.5/8.25
    Asus Eee PC 1011PX Netbook (Windows 7 x86 Starter)
You must log in or register to reply here.
Back
Top