Full CPU speed

I have a Dell D500 with the Intel Pentium M @ 1.3 GHz. Lately my pc has been acting slow and I ran CPU-Z to check the clock and it said that it is running at 598.6 MHz. I was wondering why? I when into the BIOS and it is set at 1.3 Ghz as the CPU speed, but the SpeedStep is turned on. Is speedstep causing this to happen? If so, other than turning it off in the BIOS, which it wont let me allow, is there any way of overriding this. Right now it has Windows XP Home SP3 installed with 768 DDR RAM. I am using the "Always on" config in the power options btw.

I tried to update the BIOS but it wont let me since my battery is dead and wont says its not connected for some reason. Even if conncected to the AC outlet doesnt seem to matter.

Thanks in advance for your help.
 

My Computer

System One

  • Manufacturer/Model
    HP Pavilion DV7-1129wm Entertainment PC
    CPU
    AMD Turion X2 RM-72 Dual Core @ 2.1GHz
    Memory
    2 x 2 GB Hyundai DDR2 400 MHZ
    Graphics Card(s)
    ATI Mobility Radeon HD 3200 @ 256 MB
    Sound Card
    IDT High Definition Audio/SRS Premium Sound/Altec Lansing
    Monitor(s) Displays
    17" Laptop Screen
    Screen Resolution
    1440 x 900 laptop, external 17 in LCD 1024 x 768
    Hard Drives
    WD Scorpio Blue 320 GB SATA 5400 RPM
    Toshiba 68 GB SATA 5400 RPM Second Drive (backup)
    PSU
    8 Cell Lithium Ion Battery
    Case
    Laptop with "light up" HP Logo on outside
    Cooling
    Insane air coming out of Targus dual fan cooler
    Keyboard
    Full Keyboard with numpad
    Mouse
    Microsoft Wireless Mobile Mouse 3000 / Touchpad
    Internet Speed
    Comcast Cable 20 MBps
    Other Info
    Used Primarily for CAD design using SolidWorks 2010.
    Also I love to watch HD movies using the HDMI output(Netflix).
    Linked to my Xbox 360 for Windows Media Center
    3 USB ports + USB/eSata
    HP Remote for Windows Media Center and Quickplay
    Internal Dual Layer DVD+/-RW
    External HP Lightscribe Dual Layer DVD+/-RW
    HP Webcam and Microphone
I have a Dell D500 with the Intel Pentium M @ 1.3 GHz. Lately my pc has been acting slow and I ran CPU-Z to check the clock and it said that it is running at 598.6 MHz. I was wondering why? I when into the BIOS and it is set at 1.3 Ghz as the CPU speed, but the SpeedStep is turned on. Is speedstep causing this to happen? If so, other than turning it off in the BIOS, which it wont let me allow, is there any way of overriding this. Right now it has Windows XP Home SP3 installed with 768 DDR RAM. I am using the "Always on" config in the power options btw.

I tried to update the BIOS but it wont let me since my battery is dead and wont says its not connected for some reason. Even if conncected to the AC outlet doesnt seem to matter.

Thanks in advance for your help.

Hi Blackhawk.......;)


could you post up the CPUZ shot for us..??, i need to see the clocks.
 

My Computer

System One

  • Manufacturer/Model
    ME.....
    CPU
    Q9450 @ 3.6ghz
    Motherboard
    P5K PREMIUM
    Memory
    8GB 1066mhz buffalo firestix
    Graphics Card(s)
    HD 5970
    Monitor(s) Displays
    20'' syncmaster
    Screen Resolution
    1680x1050
    Hard Drives
    160GB 7200RPM SEAGATE BARRACUDA IDE
    160GB 7200RPM SEAGATE BARRACUDA SATA 2
    PSU
    XCILIO 850w
    Case
    unknown ATX
    Cooling
    Arctic cooler pro 775
    Keyboard
    logitech EX110
    Mouse
    logitech cordless optical
    Internet Speed
    2mb
Here is a screen shot...ignore the background...i was trying to update things from Dell and it wouldnt let me.
 

Attachments

  • untitled.JPG
    untitled.JPG
    108.1 KB · Views: 68

My Computer

System One

  • Manufacturer/Model
    HP Pavilion DV7-1129wm Entertainment PC
    CPU
    AMD Turion X2 RM-72 Dual Core @ 2.1GHz
    Memory
    2 x 2 GB Hyundai DDR2 400 MHZ
    Graphics Card(s)
    ATI Mobility Radeon HD 3200 @ 256 MB
    Sound Card
    IDT High Definition Audio/SRS Premium Sound/Altec Lansing
    Monitor(s) Displays
    17" Laptop Screen
    Screen Resolution
    1440 x 900 laptop, external 17 in LCD 1024 x 768
    Hard Drives
    WD Scorpio Blue 320 GB SATA 5400 RPM
    Toshiba 68 GB SATA 5400 RPM Second Drive (backup)
    PSU
    8 Cell Lithium Ion Battery
    Case
    Laptop with "light up" HP Logo on outside
    Cooling
    Insane air coming out of Targus dual fan cooler
    Keyboard
    Full Keyboard with numpad
    Mouse
    Microsoft Wireless Mobile Mouse 3000 / Touchpad
    Internet Speed
    Comcast Cable 20 MBps
    Other Info
    Used Primarily for CAD design using SolidWorks 2010.
    Also I love to watch HD movies using the HDMI output(Netflix).
    Linked to my Xbox 360 for Windows Media Center
    3 USB ports + USB/eSata
    HP Remote for Windows Media Center and Quickplay
    Internal Dual Layer DVD+/-RW
    External HP Lightscribe Dual Layer DVD+/-RW
    HP Webcam and Microphone
Here is a screen shot...ignore the background...i was trying to update things from Dell and it wouldnt let me.

ok..... well it appears ''Speedstep'' is enabled, this is an energy saving function which lowers your multi while idle..

though when the machine is stressed the multi comes back up restoring its stock speed, so i don't think disabling it will net you any better performance.... but you can try.


you will need to enter the system BIOS upon starup.... once in look for either the ''Advanced options'' or ''CPU values'', you will find two options in there somewhere called.... ''C1E'' & ''EIST'' disable both of these & reboot, your clocks should now run @ full speed 24/7 :)

EDIT: i see you cant get in there to turn them off, im sorry but there's no way to override them vis S/W, it needs to be done in the BIOS.
 

My Computer

System One

  • Manufacturer/Model
    ME.....
    CPU
    Q9450 @ 3.6ghz
    Motherboard
    P5K PREMIUM
    Memory
    8GB 1066mhz buffalo firestix
    Graphics Card(s)
    HD 5970
    Monitor(s) Displays
    20'' syncmaster
    Screen Resolution
    1680x1050
    Hard Drives
    160GB 7200RPM SEAGATE BARRACUDA IDE
    160GB 7200RPM SEAGATE BARRACUDA SATA 2
    PSU
    XCILIO 850w
    Case
    unknown ATX
    Cooling
    Arctic cooler pro 775
    Keyboard
    logitech EX110
    Mouse
    logitech cordless optical
    Internet Speed
    2mb
I was able to use RightMark to manually set the power scheme to have it always at full Multiplier and Voltage. It runs at 1.2896 GHz now. Thanks for the help.
 

My Computer

System One

  • Manufacturer/Model
    HP Pavilion DV7-1129wm Entertainment PC
    CPU
    AMD Turion X2 RM-72 Dual Core @ 2.1GHz
    Memory
    2 x 2 GB Hyundai DDR2 400 MHZ
    Graphics Card(s)
    ATI Mobility Radeon HD 3200 @ 256 MB
    Sound Card
    IDT High Definition Audio/SRS Premium Sound/Altec Lansing
    Monitor(s) Displays
    17" Laptop Screen
    Screen Resolution
    1440 x 900 laptop, external 17 in LCD 1024 x 768
    Hard Drives
    WD Scorpio Blue 320 GB SATA 5400 RPM
    Toshiba 68 GB SATA 5400 RPM Second Drive (backup)
    PSU
    8 Cell Lithium Ion Battery
    Case
    Laptop with "light up" HP Logo on outside
    Cooling
    Insane air coming out of Targus dual fan cooler
    Keyboard
    Full Keyboard with numpad
    Mouse
    Microsoft Wireless Mobile Mouse 3000 / Touchpad
    Internet Speed
    Comcast Cable 20 MBps
    Other Info
    Used Primarily for CAD design using SolidWorks 2010.
    Also I love to watch HD movies using the HDMI output(Netflix).
    Linked to my Xbox 360 for Windows Media Center
    3 USB ports + USB/eSata
    HP Remote for Windows Media Center and Quickplay
    Internal Dual Layer DVD+/-RW
    External HP Lightscribe Dual Layer DVD+/-RW
    HP Webcam and Microphone
I was able to use RightMark to manually set the power scheme to have it always at full Multiplier and Voltage. It runs at 1.2896 GHz now. Thanks for the help.

well... i stand corrected :p


i weren't aware of any S/W that could alter those functions..... i knew FSB adjustment was possible, but not other BIOS functions.

this app will come in very handy for ppl that are locked out of the BIOS for whatever reason...


live & learn....;)
 

My Computer

System One

  • Manufacturer/Model
    ME.....
    CPU
    Q9450 @ 3.6ghz
    Motherboard
    P5K PREMIUM
    Memory
    8GB 1066mhz buffalo firestix
    Graphics Card(s)
    HD 5970
    Monitor(s) Displays
    20'' syncmaster
    Screen Resolution
    1680x1050
    Hard Drives
    160GB 7200RPM SEAGATE BARRACUDA IDE
    160GB 7200RPM SEAGATE BARRACUDA SATA 2
    PSU
    XCILIO 850w
    Case
    unknown ATX
    Cooling
    Arctic cooler pro 775
    Keyboard
    logitech EX110
    Mouse
    logitech cordless optical
    Internet Speed
    2mb
It only lets you go to the max supported for the respective cpu. For instance this Pentium M @1.3GHz. I dont think it will allow you to overclock but its better to run at max CPU then not at all.
 

My Computer

System One

  • Manufacturer/Model
    HP Pavilion DV7-1129wm Entertainment PC
    CPU
    AMD Turion X2 RM-72 Dual Core @ 2.1GHz
    Memory
    2 x 2 GB Hyundai DDR2 400 MHZ
    Graphics Card(s)
    ATI Mobility Radeon HD 3200 @ 256 MB
    Sound Card
    IDT High Definition Audio/SRS Premium Sound/Altec Lansing
    Monitor(s) Displays
    17" Laptop Screen
    Screen Resolution
    1440 x 900 laptop, external 17 in LCD 1024 x 768
    Hard Drives
    WD Scorpio Blue 320 GB SATA 5400 RPM
    Toshiba 68 GB SATA 5400 RPM Second Drive (backup)
    PSU
    8 Cell Lithium Ion Battery
    Case
    Laptop with "light up" HP Logo on outside
    Cooling
    Insane air coming out of Targus dual fan cooler
    Keyboard
    Full Keyboard with numpad
    Mouse
    Microsoft Wireless Mobile Mouse 3000 / Touchpad
    Internet Speed
    Comcast Cable 20 MBps
    Other Info
    Used Primarily for CAD design using SolidWorks 2010.
    Also I love to watch HD movies using the HDMI output(Netflix).
    Linked to my Xbox 360 for Windows Media Center
    3 USB ports + USB/eSata
    HP Remote for Windows Media Center and Quickplay
    Internal Dual Layer DVD+/-RW
    External HP Lightscribe Dual Layer DVD+/-RW
    HP Webcam and Microphone
Back
Top